Creative Werks, Inc.

05/29/2026

Pre-order here: https://creativewerksinc.com/product/g2-pwm-controller/

Just a few days left to secure discounted pre-order pricing on the G2 PWM Controller.

Whether you’re running a fan or fuel pump on a street car, race car, off-road rig, or custom build, the G2 was engineered to give you the flexibility and control modern systems demand.

Want to learn more? Check out our full overview here: https://www.youtube.com/watch?v=M09tWior0Lg&lc=UgxiMSYQmvYjmI7wQYJ4AaABAg

05/22/2026

Learn more about the G2 PWM Controller and Pre-order here: https://creativewerksinc.com/product/g2-pwm-controller/

We’re back with a quick update on the final revision before launch of the CWI Performance G2 PWM Controller. In this video, we walk through the latest refinements to the controller, including subtle machining updates to the enclosure design, system setup, and a full look at the updated G2 GUI.

One of the biggest features we’re excited to share is our new “Test Mode” — a built-in diagnostic and validation tool unlike anything else currently available on the market. Designed for tuners, builders, and enthusiasts, Test Mode gives you real-time visibility into critical system data directly through the G2 software interface.

Live monitoring and logging includes:
• NTC Temperature
• Analog Input [V]
• PWM Input [%]
• Load Current [A]
• Supply Voltage [V]
• Board Temperature

Whether you’re configuring a standalone cooling system, integrating with an ECU, or validating fan, fuel pump or motor performance, the G2 PWM Controller was built to give you deeper control, smarter diagnostics, and cleaner integration than traditional relay-based systems.

Learn more about the G2 PWM Controller and Pre-order here: https://creativewerksinc.com/product/g2-pwm-controller/

Shipping beginning in June of 26'.

Subscribe for more updates, testing, installs, and feature walkthroughs from CWI Performance.

We’re back with a quick update on the final revision before launch of the CWI Performance G2 PWM Controller. In this video, we walk through the latest refine...

05/22/2026

Save $100 and pre order here: https://creativewerksinc.com/product/g2-pwm-controller/

The Creative Werks PWM G2 Controller is a purpose-built solution for brushed and brushless systems. Designed with flexibility at its core, the G2 operates seamlessly as a standalone controller using optional temperature or voltage sensors, or integrates directly with modern ECUs via PWM input for fully dynamic, system-driven strategies. Its programmable smart fuse protection, 12–24V compatibility (including 16V race systems), and dual 100Hz brushless outputs provide advanced control without added complexity. Housed in a compact, motorsport-ready design and supported by CAN communication, configurable I/O, and a wide range of mounting and harness options, the G2 empowers builders, racers, and fabricators to create tailored cooling solutions with confidence and control.

05/21/2026

Save $100 and pre-order here: https://creativewerksinc.com

Final testing and production have started on the new G2 pwm controller. We’ve taken some feedback from our video and support of our customers to add some new features to our supporting app and the controller. Some new videos coming soon!

05/13/2026

Save $100 and Pre-Order the G2 PWM controller here: https://creativewerksinc.com/product/g2-pwm-controller/

Still running fan control through a relay-based system?

That setup has been the standard for years, but it was also designed for a completely different era of performance electronics.

Modern ECUs, brushless fans, and higher thermal loads need more than simple on/off switching.

Here’s a quick comparison between traditional relay-based control and a modern PWM solution:

Relay-Based Fan Control vs PWM Control
-Relay-Based System
-On/off operation only
-Fixed temperature logic
-Slow response to changing conditions
-Mechanical wear over time
-Limited ECU integration
-Works, but lacks precision

PWM Controller (G2)
-Variable fan speed control
-Real-time thermal response
-Smooth, efficient operation
-No relay fatigue or switching wear
-ECU PWM input compatible
-Designed for brushed + brushless systems

The difference isn’t just control, it’s how accurately your system can respond to real operating conditions. Relay systems still function, but PWM control is how modern performance cooling is being managed.

05/03/2026

Save $100 on pre-orders here: https://creativewerksinc.com/product/g2-pwm-controller/

After a ton of development, testing, and feedback from racers, builders, and fabricators, the Creative Werks PWM G2 Controller is officially here.

The G2 was designed to be a flexible, motorsport-ready PWM solution for both brushed and brushless systems without adding unnecessary complexity to your build.

Whether you want to run it standalone with temp/voltage sensors or integrate directly with your ECU through PWM input, the G2 was built to adapt to your setup.

Key features:
• Brushed + brushless compatibility
• 12–24V support (including 16V race systems)
• Dual 100Hz brushless outputs
• Smart fuse protection
• CAN communication
• Configurable I/O
• Dedicated Windows setup software

We put together a quick overview video showing the controller, software, and functionality here ⬇️

https://youtu.be/duWK-qVkhxU

Pre-orders are officially live now, with discounted pricing available through May 31st before production begins.

Really appreciate all the support and excitement around this project so far!

4 likes. "CWI G2 PWM controller"

08/27/2025

🚀 Big News!
Creative Werks Inc. is proud to announce our new partnership with needCode from Krakow, Poland.

By combining our hardware & engineering expertise with needCode’s software innovation, we’ll deliver stronger, smarter IoT and embedded solutions for industries across North America.

We’re excited for what’s ahead! 🌎💡

👉 Learn more: www.creativewerksinc.com

👉 Explore needCode: https://needcode.io

Discover needCode, a global leader in embedded software engineering solutions for IoT. Transform your products with IT experts.

01/14/2025

Making some parts today, billet wiring bulkhead for a project and future product.

We’re going to test it in the ice racing Fox Body.

12/24/2024

Working on an EFI manifold for the company test car.

A little welding and making some Fuel injector bungs.

11/06/2024

GT40 dry sump