Polymers Center

Polymers Center The Polymers Center was created to increase knowledge, provide technical support, and assist the plastics industry.

The Polymers Center was established to support, maintain and encourage the polymers industry by helping increase knowledge, provide technical support, and assist in the development of emerging technologies. The Polymers Center offers sophisticated engineering and testing capabilities, plastics compounding, and workforce training for Extrusion and Injection Molding. Located in Charlotte, NC and ser

ving the Southeast, the organization has the rare combination of equipment and expertise to analyze, troubleshoot, and make recommendations to assist the plastics industry.

Ready to take your extrusion knowledge to the next level?Our upcoming Extrusion Processing Fundamentals course is the pe...
06/03/2026

Ready to take your extrusion knowledge to the next level?

Our upcoming Extrusion Processing Fundamentals course is the perfect opportunity to dive into startup procedures, get hands-on with equipment, and work through real-world troubleshooting scenarios you’re likely to face on the production floor. From process fundamentals to practical problem-solving, this course is designed to help build confidence and skills you can apply right away.

Now’s the time to sign up and join us for an engaging, hands-on learning experience. We look forward to seeing you there! https://www.polymers-center.org/extrusionprocessingfundamentals

We have a new addition, the Purity Concept Systems by SIKORA. This advanced system uses X-ray technology and optical sen...
05/28/2026

We have a new addition, the Purity Concept Systems by SIKORA. This advanced system uses X-ray technology and optical sensors to inspect and analyze plastic pellets, flakes, and film during production or through sample testing, with the ability to detect contamination as small as 50 µm.
To learn more about our testing: https://www.polymers-center.org/testing

05/08/2026

Our senior design team were finalists with their creation of the PCE Grind! From start to finish, their journey was that of dedication and hard work. With the support of the Polymers Center Team, President Doug DeSimone and Polymer Science Manager, Yiro Shimabukuro, they built and tested the prototype that would grind plastic chunks and pellets into sand-like powder. We are endlessly proud of our engineering seniors and have no doubt that their futures are bright. Looking forward to learning more about their achievements and happy to be a small part of their journey.
Congratulations to Alison Hodges, Ben Burgamy, Chris Cervantes, Francisco Barrientos, Jacob Lasecki, and Joshua Traxler!

Our UNC Charlotte engineering students are hard at work on their Senior Design Project of the PCE Grind, developing a fu...
04/24/2026

Our UNC Charlotte engineering students are hard at work on their Senior Design Project of the PCE Grind, developing a functional prototype of a mid-sized polymer grinder designed to process 5–20 lbs of material. Their goal? Transform plastic chunks and pellets into a fine, sand-like powder—opening the door to new possibilities in material reuse, processing, and product development. With the support of the Polymers Center Team, President Doug DeSimone and Polymer Science Manager, Yiro Shimabukuro, we can finally see the prototype come to life. Stay tuned for their final presentation!

It’s hands-on day for our Extrusion Processing Fundamentals students!Participants are diving into startup procedures, ge...
04/23/2026

It’s hands-on day for our Extrusion Processing Fundamentals students!
Participants are diving into startup procedures, getting comfortable with equipment, and working through practical troubleshooting scenarios they’re likely to face on the floor.
Join us for the one in August: https://www.polymers-center.org/extrusionprocessingfundamentals.

The SPE Extrusion Optimization TopCon, hosted by the Society of Plastics Engineers (SPE) Extrusion Division, is a great ...
04/23/2026

The SPE Extrusion Optimization TopCon, hosted by the Society of Plastics Engineers (SPE) Extrusion Division, is a great opportunity to learn, connect, and problem-solve with experts across the industry.

Bring your challenges to the table and engage directly with the SPE Extrusion Board, academic leaders, experienced speakers, and industry peers. From troubleshooting day-to-day issues to exploring advanced extrusion theory for single- and twin-screw systems, the conversations here are built around real-world impact.
For more information and to register: https://speextrusiontopcon.technical-content.com/

A full house at the Polymers Center this week as we welcome two Extrusion classes!We’re excited to host Paulson’s ProEx,...
04/22/2026

A full house at the Polymers Center this week as we welcome two Extrusion classes!
We’re excited to host Paulson’s ProEx, led by instructor Rick Barnes, teaching practical, real-world skills. The other course, (through our Community College partners), instructor Scott Lambert teaches our Extrusion Processing Fundamentals course, which introduces the very basics of the extrusion process.
We’d love to have you join us at our next event—check out our training page for more details and upcoming dates! https://www.polymers-center.org/training

Instron is hosting a free Road Show at the Polymers Center of Excellence in Charlotte, NC on Tuesday, May 5th.• Morning:...
04/01/2026

Instron is hosting a free Road Show at the Polymers Center of Excellence in Charlotte, NC on Tuesday, May 5th.

• Morning: Static testing – Bluehill Universal software and Advanced Video Extensometer
• Afternoon: Fatigue testing – Wave Matrix Software

There will be live demonstrations on testing systems, and you’re welcome to attend either session or both.
Space is limited, please Register here for Instron's event: https://info.instron.com/pcoe-instron-2026

The injection molding process supports a wide range of applications, from everyday items like LEGO bricks to high-precis...
03/26/2026

The injection molding process supports a wide range of applications, from everyday items like LEGO bricks to high-precision components in mobile phones. Behind the scenes, smart design techniques play a critical role in managing challenges like plastic shrinkage and ensuring consistent quality at scale.

Curious to learn more?

Join our Introduction to Injection Molding this April and take the first step in your molding journey with us. https://www.polymers-center.org/injection-molding-fundamentals

At The Polymers Technology Center, we specialize in process development designed to move ideas from concept to commercia...
03/25/2026

At The Polymers Technology Center, we specialize in process development designed to move ideas from concept to commercialization—efficiently and effectively.

With a range of twin screw extruders of varying sizes, we offer the flexibility to process a wide variety of materials and product formulations. Whether at the lab scale or pilot scale, our capabilities allow us to tailor solutions that meet your specific development needs.

If you're looking to optimize your process or scale up with confidence, we’re here to help. https://www.polymers-tech-center.com/

Address

8900 Research Drive
Charlotte, NC
28262

Opening Hours

Monday 9am - 4:30pm
Tuesday 9am - 4:30pm
Wednesday 9am - 4:30pm
Thursday 9am - 4:30pm
Friday 9am - 4:30pm

Telephone

+17046024100

Website

Alerts

Be the first to know and let us send you an email when Polymers Center posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Polymers Center:

Shortcuts

Share

Category