MimoWork

MimoWork 20+ Years of Experience
100+ Laser Machine Models
100+ Patented Technology
Factory Direct Sell

06/08/2026

Squares are easy. Circles? No problem.

But what if your embroidered patch has six sides and sharp corners?

That’s where laser cutting gets fun.

No cutting dies.
No watering down a great design just to make production easier.

Load the file, place the patches, and let the laser follow every corner, angle, and curve with precision.

Triangles, hexagons, custom badges, weird little polygons, bring them on.

Got an unusual patch shape in mind? Send us your design or a few samples.

✅ Production Estimate
✅ Workflow Integration
✅ FREE demos
✅ YOUR materials
✅ Live, so no editing!

Reach out now:
📧 [email protected]
📱 WhatsApp: [+86 173 0175 0898]
🌐 https://www.mimowork.com/contact-us/

Call us a distributor if it helps you sleep at night.
We'll be over here with R&D, design, manufacturing, and sales.
MimoWork Laser — we're a Factory and Manufacturer. Both. At once.

05/08/2026

Still lining up plastic parts one by one?
Yeah… that gets old fast.

Place them randomly on the conveyor, though, and you start wondering whether the logo will come out sideways—or miss the target completely.

This UV laser marking system solves both problems. Its vision system identifies each part’s position and angle, then adjusts the marking automatically.

No fixtures.
No manual alignment.
No one standing there watching every single part.

Got a plastic component you’d like to test? Send us a few samples. We’ll run them on the machine, record the test, and show you the actual results.

Comment “SAMPLE” or send us a message.

✅ Production Estimate
✅ Workflow Integration
✅ FREE demos
✅ YOUR materials
✅ Live, so no editing!

Reach out now:
📧 [email protected]
📱 WhatsApp: [+86 173 0175 0898]
🌐 https://www.mimowork.com/contact-us/

Call us a distributor if it helps you sleep at night.
We'll be over here with R&D, design, manufacturing, and sales.
MimoWork Laser — we're a Factory and Manufacturer. Both. At once.

04/08/2026

A customer sent us a full box of ultra-thin mesh fabric for a cutting test.

Thin material and laser heat can become a bad combination pretty quickly. Too much power, the wrong speed or poor airflow can scorch the edges, or ruin the material altogether.
Fortunately, the result was exactly what we expected: clean, consistent cuts across the fabric.

The secret isn’t simply turning up the laser power. It’s getting the speed, power, airflow and exhaust system working together for that specific material.

Cutting furniture fabric, upholstery mesh or another difficult textile? Send us a photo or sample. Our team can test the material and help evaluate the right cutting solution.

✅ Production Estimate
✅ Workflow Integration
✅ FREE demos
✅ YOUR materials
✅ Live, so no editing!

Reach out now:
📧 [email protected]
📱 WhatsApp: [+86 173 0175 0898]
🌐 https://www.mimowork.com/contact-us/

Call us a distributor if it helps you sleep at night.
We'll be over here with R&D, design, manufacturing, and sales.
MimoWork Laser — we're a Factory and Manufacturer. Both. At once.

03/08/2026

This material refuses to stay flat.
Press it, it sinks.
Pull it, it stretches.
Try to cut it, and it moves everywhere.

But a laser?
No pressure. No pulling. No squashing.

Soft material. Serious precision.
Would you trust a laser with your trickiest material?

✅ Production Estimate
✅ Workflow Integration
✅ FREE demos
✅ YOUR materials
✅ Live, so no editing!

Reach out now:
📧 [email protected]
📱 WhatsApp: [+86 173 0175 0898]
🌐 https://www.mimowork.com/contact-us/

Call us a distributor if it helps you sleep at night.
We'll be over here with R&D, design, manufacturing, and sales.
MimoWork Laser — we're a Factory and Manufacturer. Both. At once.

31/07/2026

Alright, we're back on foam today. 38mm white sponge this time.

Not too different from yesterday's 39mm yellow, but white is where the truth comes out.
You can hide a lot on a dark colored foam.
But white? It shows everything. Every line, every edge, every tiny imperfection.

And that's exactly why we picked it.

If the laser left even a hint of yellowing or scorch marks, you'd see it right away.
But guess what? Clean. White. No burn. No drama.
A different color to prove it's not luck.

✅ Production Estimate
✅ Workflow Integration
✅ FREE demos
✅ YOUR materials
✅ Live, so no editing!

Reach out now:
📧 [email protected]
📱 WhatsApp: [+86 173 0175 0898]
🌐 https://www.mimowork.com/contact-us/

Call us a distributor if it helps you sleep at night.
We'll be over here with R&D, design, manufacturing, and sales.
MimoWork Laser — we're a Factory and Manufacturer. Both. At once.

30/07/2026

Last time we cut that 75mm foam, you guys seemed to enjoy it.
So today, I pulled out a few more pieces, different thicknesses, different colors.
Take this 39mm yellow sponge. The texture is ridiculously soft, I couldn't resist giving it a squeeze after cutting it.

I know a lot of you are probably wondering: "How does the laser cut foam without burning it?"

Here's the short version: The laser beam is concentrated and fast, so fast that the cut is done before you even see it happen.
The heat doesn't have time to spread, it gets carried away with the beam itself.
That's why the edges come out clean, smooth, and completely free of scorch marks.

Honestly, the finished edge looks as clean as if you'd cut it with a sharp knife through soft tofu.

✅ Production Estimate
✅ Workflow Integration
✅ FREE demos
✅ YOUR materials
✅ Live, so no editing!

Reach out now:
📧 [email protected]
📱 WhatsApp: [+86 173 0175 0898]
🌐 https://www.mimowork.com/contact-us/

Call us a distributor if it helps you sleep at night.
We'll be over here with R&D, design, manufacturing, and sales.
MimoWork Laser — we're a Factory and Manufacturer. Both. At once.

29/07/2026

15mm thick acrylic. That's about the thickness of three iPhones stacked on top of each other.

Most people look at a chunk of acrylic that thick and the first thing that comes to mind is，"You'd need a saw for this, right?" Or maybe a router.
Either way, it's a noisy, messy process, and you're still spending ages sanding it down afterward.

But the laser?
It doesn't even blink at the thickness.
Edge so smooth it looks like it came straight out of a mold, no sanding needed.

15mm acrylic? Piece of cake.

✅ Production Estimate
✅ Workflow Integration
✅ FREE demos
✅ YOUR materials
✅ Live, so no editing!

Reach out now:
📧 [email protected]
📱 WhatsApp: [+86 173 0175 0898]
🌐 https://www.mimowork.com/contact-us/

Call us a distributor if it helps you sleep at night.
We'll be over here with R&D, design, manufacturing, and sales.
MimoWork Laser — we're a Factory and Manufacturer. Both. At once.

28/07/2026

A lot of people ask me, why do you guys always cut circles?

Seems random, right? Like we just picked the most boring shape on purpose.

But that's not it.

A circle is the best "test question" for laser cutting.
It tests whether the laser can hold a steady arc, keep consistent speed, and handle curves without dragging or over burning.

If a laser can cut a clean circle and a crisp square, it can handle anything else you throw at it.

Today we're cutting a material that feels like plastic sheets.
The laser turns it into a perfect circle, full, clean edges.

So next time you see us cutting circles and squares, don't think it's boring.
We're just putting the laser through its paces.

✅ Production Estimate
✅ Workflow Integration
✅ FREE demos
✅ YOUR materials
✅ Live, so no editing!

Reach out now:
📧 [email protected]
📱 WhatsApp: [+86 173 0175 0898]
🌐 https://www.mimowork.com/contact-us/

Call us a distributor if it helps you sleep at night.
We'll be over here with R&D, design, manufacturing, and sales.
MimoWork Laser — we're a Factory and Manufacturer. Both. At once.

27/07/2026

Been a while since we cut fabric tags. Figured it's a good way to kick off the week.

Ever actually look at the little tag on your shirt?
The one with the size, the wash instructions, the brand logo?
Doesn't seem like much. But when it comes to production, uneven edges, slightly off stitching, and suddenly that shirt feels way cheaper than it should.

That tiny tag might be the smallest part of a garment, but it's also the quickest to reveal sloppy work.

So we ran a stack today.

Laser cut, every edge clean and straight, no fraying, no curling.
Stack them up and they look like photocopies. Same pattern on piece one and piece one hundred.

Tags might seem minor.
But doing small stuff right is what separates good work from great work.

✅ Production Estimate
✅ Workflow Integration
✅ FREE demos
✅ YOUR materials
✅ Live, so no editing!

Reach out now:
📧 [email protected]
📱 WhatsApp: [+86 173 0175 0898]
🌐 https://www.mimowork.com/contact-us/

Call us a distributor if it helps you sleep at night.
We'll be over here with R&D, design, manufacturing, and sales.
MimoWork Laser — we're a Factory and Manufacturer. Both. At once.

24/07/2026

A few days ago, we cut thick foam and fiberglass, and clearly you guys are into that "thick and fluffy" vibe.
I went through the comments and noticed a lot of you were curious about one thing.
Does laser cutting leave burn marks on this kind of material?

So today, I dug up something similar.

Looks like felt on the outside, clean, white, slightly fibrous, almost soft to the touch.
Flip it over? Boom. Solid black, dense, covered in tiny pores, like it's wearing a face mask.

The laser glides through, no burns, no discoloration.
Can't tell on the black side?
Just look at the white fiber surface, equally smooth, zero scorch marks.

So rest assured, our laser leaves foam and fiber materials completely unharmed.

✅ Production Estimate
✅ Workflow Integration
✅ FREE demos
✅ YOUR materials
✅ Live, so no editing!

Reach out now:
📧 [email protected]
📱 WhatsApp: [+86 173 0175 0898]
🌐 https://www.mimowork.com/contact-us/

Call us a distributor if it helps you sleep at night.
We'll be over here with R&D, design, manufacturing, and sales.
MimoWork Laser — we're a Factory and Manufacturer. Both. At once.

Address

Shanghai
200120

Telephone

+8617301750898

Website

Alerts

Be the first to know and let us send you an email when MimoWork posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to MimoWork:

Shortcuts

Share

Category