Allflo Pumps & Equipment

14/04/2026

𝐖𝐡𝐚𝐭 𝐢𝐧𝐟𝐥𝐮𝐞𝐧𝐜𝐞𝐬 𝐭𝐡𝐞 𝐫𝐢𝐠𝐡𝐭 𝐬𝐭𝐚𝐧𝐝𝐩𝐢𝐩𝐞 𝐩𝐚𝐜𝐤𝐚𝐠𝐞 𝐛𝐮𝐢𝐥𝐝?
From fuel capacity and controller options through to canopy builds and mine-spec requirements, the right setup starts with the right selection process.

In this video, we run you through the key components that influence the final build.

𝐋𝐞𝐚𝐫𝐧 𝐌𝐨𝐫𝐞:
https://www.allflo.com.au/standpipes/standpipe-pump-packages

02/04/2026

𝗗𝗲𝘄𝗮𝘁𝗲𝗿𝗶𝗻𝗴 𝘁𝗵𝗮𝘁 𝗸𝗲𝗲𝗽𝘀 𝘀𝗶𝘁𝗲𝘀 𝗺𝗼𝘃𝗶𝗻𝗴.
Whether it’s a quarry pond, mine sump, dirty water dam or sudden stormwater build-up, the real issue isn’t just moving water.

Built to handle real dewatering conditions:
🔹dirty water and suspended solids
🔹fast priming from variable levels
🔹unattended operation
🔹rugged site conditions
🔹reliable performance over long shifts

This is where a properly packaged Remko pumpset makes the difference between a manageable issue and lost production time.

𝐄𝐱𝐩𝐥𝐨𝐫𝐞 𝐨𝐮𝐫 𝐩𝐚𝐜𝐤𝐚𝐠𝐞𝐝 𝐩𝐮𝐦𝐩𝐬𝐞𝐭 𝐬𝐨𝐥𝐮𝐭𝐢𝐨𝐧𝐬:
https://ap1.hubs.ly/y0Kv4v0

𝐁𝐮𝐢𝐥𝐭 𝐭𝐨 𝐦𝐨𝐯𝐞 𝐰𝐚𝐭𝐞𝐫. Built to keep sites moving.

26/03/2026

𝗖𝗮𝗻 𝘆𝗼𝘂 𝗽𝗶𝗰𝗸 𝘄𝗵𝗶𝗰𝗵 𝗽𝘂𝗺𝗽 𝗶𝘀 𝘄𝗵𝗶𝗰𝗵?
RC ISO Series - AG Plus 900
RC DIN Series - AG 700

At a glance, they look similar — but they’re built for different applications.

𝗛𝗶𝗻𝘁𝘀:
Hard: ISO vs DIN refers to the pump standard and influences configuration, performance and installation fit.
Easy: AG Plus integrates the fuel tank into the base, whereas AG Series uses an elevated tank design.

Recently, we received an enquiry for two diesel-driven pumpsets.
Same request. Two different applications.

So we ran them through our process:
1️⃣ 𝗦𝗰𝗼𝗽𝗲
2️⃣ 𝗦𝗲𝗹𝗲𝗰𝘁
3️⃣ 𝗗𝗲𝘀𝗶𝗴𝗻
4️⃣ 𝗠𝗮𝗻𝘂𝗳𝗮𝗰𝘁𝘂𝗿𝗲
5️⃣ 𝗗𝗲𝗹𝗶𝘃𝗲𝗿
6️⃣ 𝗦𝘂𝗽𝗽𝗼𝗿𝘁

𝗧𝗵𝗲 𝗿𝗲𝘀𝘂𝗹𝘁?
Not two identical pumps — but two pumpsets built for purpose.
That’s what we call the 𝗔𝗹𝗹𝗳𝗹𝗼 𝗔𝗱𝘃𝗮𝗻𝘁𝗮𝗴𝗲.

Both units are now at the delivery stage. From there, we support both the pumpsets and the businesses behind them.

𝗘𝘅𝗽𝗹𝗼𝗿𝗲 𝘁𝗵𝗲 𝗿𝗮𝗻𝗴𝗲 & 𝐫𝐞𝐚𝐜𝐡 𝐨𝐮𝐭 𝐭𝐨 𝐭𝐡𝐞 𝐭𝐞𝐚𝐦:
https://ap1.hubs.ly/y0Jt2v0

22/03/2026

𝗠𝗼𝘀𝘁 𝗶𝗻𝗱𝘂𝘀𝘁𝗿𝗶𝗮𝗹 𝗽𝘂𝗺𝗽𝗶𝗻𝗴 𝗽𝗿𝗼𝗯𝗹𝗲𝗺𝘀 𝗱𝗼𝗻’𝘁 𝘀𝘁𝗮𝗿𝘁 𝘄𝗶𝘁𝗵 𝘁𝗵𝗲 𝗽𝘂𝗺𝗽.
They start in how the application is understood... or is that misunderstood?

When performance drops, the first step isn’t changing the pump - it’s understanding how the system is actually operating.

That’s why our Industrial team regularly visits customer sites to discuss:
🔹 The process and operating conditions
🔹 What the current system is doing
🔹 Where improvements or changes may help

𝗕𝗲𝗰𝗮𝘂𝘀𝗲 𝘁𝗵𝗲 𝗿𝗶𝗴𝗵𝘁 𝗽𝘂𝗺𝗽 𝗱𝗲𝗽𝗲𝗻𝗱𝘀 𝗼𝗻 𝗵𝗼𝘄 𝘁𝗵𝗲 𝘀𝘆𝘀𝘁𝗲𝗺 𝗿𝗲𝗮𝗹𝗹𝘆 𝗿𝘂𝗻𝘀.

If you're dealing with reliability issues, pump replacement projects or process transfer challenges, our Allflo Industrial team, including Jarred, Damian and Kade, will get onsite to understand the application before you commit to the wrong pump.

Learn more about how we approach industrial applications:
https://ap1.hubs.ly/y0HNxT0

18/03/2026

𝗙𝗶𝗹𝗹𝗶𝗻𝗴 𝘄𝗮𝘁𝗲𝗿 𝘁𝗿𝘂𝗰𝗸𝘀 𝗾𝘂𝗶𝗰𝗸𝗹𝘆 𝗶𝘀𝗻’𝘁 𝗮𝗹𝘄𝗮𝘆𝘀 𝘀𝘁𝗿𝗮𝗶𝗴𝗵𝘁𝗳𝗼𝗿𝘄𝗮𝗿𝗱.
Flow rates, pump selection and standpipe design all impact site efficiency across mining, quarrying and civil applications. In this video, Duncan walks through how Allflo designs standpipe and pump packages to suit specific requirements, delivering reliable, high-volume water transfer.

𝗟𝗲𝗮𝗿𝗻 𝗺𝗼𝗿𝗲:
📺https://ap1.hubs.ly/y0HpSf0
☎️ 1800 333 424

Filling water trucks quickly and efficiently isn’t always straightforward.Flow rate, pump selection and standpipe design all play a critical role in site eff...

12/03/2026

𝐋𝐚𝐭𝐞 𝐀𝐩𝐫𝐢𝐥 𝐝𝐞𝐥𝐢𝐯𝐞𝐫𝐲 𝐰𝐚𝐬𝐧’𝐭 𝐠𝐨𝐢𝐧𝐠 𝐭𝐨 𝐜𝐮𝐭 𝐢𝐭.
When the wet season hits, pumps need to be on site - not on order.

With monsoonal rain impacting a Northern Territory mine remediation project, these two custom trailer pump builds were assembled and dispatched weeks earlier than planned.

Configured for reliable dewatering:
🔹Remko RA45-25SC auto-prime pump
🔹50cfm Diaphragm Prime
🔹Perkins 38kW diesel engine
🔹Kensho K101 controller
🔹Heavy-duty galvanised trailer
🔹Custom hose and foot valve mounting

From straightforward transfer trailers to fully customised canopy builds, we assemble pump packages to suit your required duty point and timeframe.

𝗕𝘂𝗶𝗹𝘁 𝗿𝗲𝗮𝗱𝘆. Delivered early.

If you’re planning upcoming works, share your required flow, head and timeframe and we will configure the rest.
https://ap1.hubs.ly/y0Gwd20

09/03/2026

𝗕𝗲𝗳𝗼𝗿𝗲 𝗮𝗻𝘆 𝗽𝘂𝗺𝗽 𝗹𝗲𝗮𝘃𝗲𝘀 𝗼𝘂𝗿 𝘄𝗼𝗿𝗸𝘀𝗵𝗼𝗽, 𝗶𝘁 𝗴𝗼𝗲𝘀 𝘁𝗵𝗿𝗼𝘂𝗴𝗵 𝗥𝗮𝗷.

Raj manages the logistics side of our workshop, preparing finished pumps for transport and coordinating dispatch across the country.

Each unit is wrapped, secured and checked before it leaves.
𝗡𝗼 𝘀𝗵𝗼𝗿𝘁𝗰𝘂𝘁𝘀. No surprises.

𝗗𝗲𝘀𝗶𝗴𝗻 𝗮𝗻𝗱 𝗯𝘂𝗶𝗹𝗱 𝗺𝗮𝘁𝘁𝗲𝗿.
𝘎𝘦𝘵𝘵𝘪𝘯𝘨 𝘪𝘵 𝘵𝘩𝘦𝘳𝘦 𝘴𝘢𝘧𝘦𝘭𝘺 & 𝘰𝘯-𝘵𝘪𝘮𝘦 𝘮𝘢𝘵𝘵𝘦𝘳𝘴 𝘫𝘶𝘴𝘵 𝘢𝘴 𝘮𝘶𝘤𝘩.

03/03/2026

𝗔𝘀 𝗼𝗻𝗲 𝗼𝗳 𝗼𝘂𝗿 𝗠𝗲𝗹𝗯𝗼𝘂𝗿𝗻𝗲-𝗯𝗮𝘀𝗲𝗱 𝗜𝗻𝗱𝘂𝘀𝘁𝗿𝗶𝗮𝗹 𝗣𝘂𝗺𝗽 𝗦𝗽𝗲𝗰𝗶𝗮𝗹𝗶𝘀𝘁𝘀, Damien has been working closely with diaphragm pump applications across a range of sites.

Rather than relying on a spec sheet, he recently spent time at our Shepparton HQ with Production Manager Corey, pulling apart one of our AODD units on the bench and working through the detail.

They reviewed diaphragms, balls, seats and the air valve, and discussed how material selection and installation affect performance in the field.

The conversation centred on the kinds of questions we see on site:
🔹Is the material right for the fluid?
🔹Is the air supply adequate?
🔹Is the installation set up correctly?

𝗧𝗵𝗲 𝗳𝗼𝗰𝘂𝘀 𝘄𝗮𝘀 𝘀𝗶𝗺𝗽𝗹𝗲. Get it right the first time.

Understanding what’s inside the pump changes the way you approach the whole system.

Damien is taking that insight back to Melbourne, with diaphragm pump applications becoming a clear focus in his role.

𝗥𝘂𝗻𝗻𝗶𝗻𝗴 𝗔𝗢𝗗𝗗 𝗽𝘂𝗺𝗽𝘀 𝗶𝗻 𝗠𝗲𝗹𝗯𝗼𝘂𝗿𝗻𝗲?
Damien is available to step through your AODD setup on site.

30/01/2026

UPDATED ARTICLE: 𝗖𝗲𝗻𝘁𝗿𝗶𝗳𝘂𝗴𝗮𝗹 𝗣𝘂𝗺𝗽 𝗘𝗳𝗳𝗶𝗰𝗶𝗲𝗻𝗰𝘆
Our updated article, “6 𝘊𝘰𝘮𝘮𝘰𝘯 𝘊𝘦𝘯𝘵𝘳𝘪𝘧𝘶𝘨𝘢𝘭 𝘗𝘶𝘮𝘱 𝘌𝘧𝘧𝘪𝘤𝘪𝘦𝘯𝘤𝘺 𝘘𝘶𝘦𝘴𝘵𝘪𝘰𝘯𝘴 𝘌𝘹𝘱𝘭𝘢𝘪𝘯𝘦𝘥”, breaks down the fundamentals behind most centrifugal pump efficiency problems.

The article covers:
🔹What pump efficiency really means (and how it’s calculated)
🔹How speed, curves and specific speed affect performance
🔹Why small design and maintenance issues lead to higher energy costs

Written for engineers, operators and decision-makers who want reliable performance without unnecessary complexity.

👉 𝗥𝗲𝗮𝗱 𝘁𝗵𝗲 𝗴𝘂𝗶𝗱𝗲: https://ap1.hubs.ly/y0x3X10

Learn how centrifugal pump efficiency affects energy use, operating costs and performance, with clear answers to six common efficiency questions.

27/01/2026

PAST PROJECT | 𝗥𝗲𝗺𝗼𝘁𝗲 𝗽𝘂𝗺𝗽𝗶𝗻𝗴 𝘄𝗶𝘁𝗵𝗼𝘂𝘁 𝗺𝗮𝗶𝗻𝘀 𝗽𝗼𝘄𝗲𝗿
As part of our new website launch, we’re re-sharing a few real-world case studies that still reflect how we work today.

This project shows what matters most on site:
🔹Practical engineering, not over-complex solutions
🔹Keeping operations running while long-term fixes are put in place
🔹Support that helps customers avoid downtime, not just react to it

A 𝘀𝘂𝗯𝗺𝗲𝗿𝘀𝗶𝗯𝗹𝗲 𝗽𝘂𝗺𝗽 𝗮𝗻𝗱 𝗱𝗶𝗲𝘀𝗲𝗹 𝗴𝗲𝗻𝘀𝗲𝘁 𝗽𝗮𝗰𝗸𝗮𝗴𝗲 𝘄𝗶𝘁𝗵 𝗦𝗠𝗦 𝗰𝗼𝗻𝘁𝗿𝗼𝗹 was engineered to maintain uptime where mains power wasn’t available, 𝘄𝗶𝘁𝗵𝗼𝘂𝘁 𝗰𝗼𝗺𝗽𝗿𝗼𝗺𝗶𝘀𝗶𝗻𝗴 𝘀𝗮𝗳𝗲𝘁𝘆 𝘰𝘳 𝗽𝗲𝗿𝗳𝗼𝗿𝗺𝗮𝗻𝗰𝗲.

👉 𝗥𝗲𝗮𝗱 𝗳𝘂𝗹𝗹 𝗖𝗮𝘀𝗲 𝗦𝘁𝘂𝗱𝘆: https://ap1.hubs.ly/y0xLG60

Submersible pump & genset package with remote SMS control, delivering reliable dewatering, real-time alerts & reduced site attendance in a remote location.

19/01/2026

UPDATED GUIDE: 𝗣𝘂𝗺𝗽 𝗙𝗹𝗼𝘄 𝗥𝗮𝘁𝗲 𝗖𝗮𝗹𝗰𝘂𝗹𝗮𝘁𝗶𝗼𝗻𝘀
Our updated guide, “𝘏𝘰𝘸 𝘵𝘰 𝘤𝘢𝘭𝘤𝘶𝘭𝘢𝘵𝘦 𝘵𝘩𝘦 𝘧𝘭𝘰𝘸 𝘳𝘢𝘵𝘦 𝘰𝘧 𝘺𝘰𝘶𝘳 𝘱𝘶𝘮𝘱” explains one of the most critical (and commonly misunderstood) fundamentals in pump performance.

The guide covers:
🔹Why flow rate matters for efficiency, reliability, and pump selection
🔹How to calculate required flow rate before selecting a pump
🔹Simple methods to measure flow rate in operating systems
🔹What mismatched flow rates can indicate before failures occur

Written for 𝗼𝗽𝗲𝗿𝗮𝘁𝗼𝗿𝘀, 𝗲𝗻𝗴𝗶𝗻𝗲𝗲𝗿𝘀 & 𝘀𝗶𝘁𝗲 𝗺𝗮𝗻𝗮𝗴𝗲𝗿𝘀 who need accurate, practical guidance - not theory.

👉 𝗥𝗲𝗮𝗱 𝘁𝗵𝗲 𝗴𝘂𝗶𝗱𝗲: https://ap1.hubs.ly/y0wxWP0

Learn to calculate pump flow rate for new or existing systems. Understand why flow rate matters, how to measure it & how to size the right pump correctly.