Consolidated Electrical Distributor South Africa

Directions Website Contact the business

Consolidated Electrical Distributor South Africa CED serves South Africa’s niche low-voltage electrical industry, with a vision to become the bench

One Switch. Two Power Sources. Simple Changeover.When your installation needs a straightforward way to switch between ma...
29/10/2026

One Switch. Two Power Sources. Simple Changeover.

When your installation needs a straightforward way to switch between mains and standby power, the TOSUN TSQ7-125 Manual Changeover Switch provides a practical, flexible solution.
Designed for use in electrical distribution and backup power applications, the TSQ7-125 allows manual selection between two power supplies from a single switch.

With multiple configurations available, it can be matched to a wide range of installation requirements:
- 63 A, 80 A, 100 A and 125 A rated current options
- 1P, 2P, 3P and 4P configurations
- 240 V / 415 V rated working voltage
- DIN rail mounting for straightforward panel integration
- IP20 protection
- Listed standard: IEC 60947-3

Whether you're building a new backup power system or integrating changeover functionality into a distribution board, the TSQ7-125 gives you the flexibility to select the configuration your application requires.

Available from stock through CED, with a range of configurations to suit different applications. Contact our team to discuss your requirements.

📞 087 703 0888
📧 [email protected]

Control Starts Here.Different electrical control applications call for different configurations. The TOSUNlux LCH8 Modul...
22/10/2026

Control Starts Here.

Different electrical control applications call for different configurations. The TOSUNlux LCH8 Modular Contactor range gives panel builders and installers the flexibility to select the right combination for the job.
Available in 2-pole and 4-pole models, the range offers multiple current ratings, control voltages, contact arrangements and operating options to suit a variety of electrical control requirements.
- 2P and 4P models
- AC-1 ratings from 16 A to 63 A
- AC-3 ratings from 6 A to 25 A
- 24 V, 110 V and 230 V AC control voltage options
- Normally open, normally closed and mixed contact arrangements
- Available in automatic operation or automatic operation with manual override

The manual override option provides added flexibility, allowing the contactor to be manually controlled when required while retaining automatic operation.

From panel building to everyday electrical control applications, the LCH8 range provides a practical and versatile solution for reliable switching and control.

Available from stock through CED, with a range of configurations to suit different applications. Contact our team to discuss your requirements.
📞 087 703 0888
📧 [email protected]

One Feed. Multiple Connections.Efficient power distribution starts with making the right connections.The TOSUNlux TTK Te...
15/10/2026

One Feed. Multiple Connections.

Efficient power distribution starts with making the right connections.

The TOSUNlux TTK Terminal Block range provides a practical solution for distributing an incoming conductor across multiple outgoing connections within distribution boards and control panels.

With six models spanning 80 A to 500 A, the range gives panel builders and installers the flexibility to select a terminal block suited to the current rating and connection requirements of the application.
- Six models: TTK-80, TTK-125, TTK-160, TTK-250, TTK-400 and TTK-500
- Current ratings from 80 A to 500 A
- Model-specific main and branch connection options
- A practical way to organise multiple connections within panels and distribution boards

From smaller distribution requirements through to higher-current applications, the TTK range offers a straightforward approach to organised and efficient power distribution.

Available through CED, with a range of models to suit different applications. Contact our team to discuss your requirements.
📞 087 703 0888
📧 [email protected]

Outdoor Isolation You Can Count On.Outdoor electrical installations demand equipment designed to handle exposure to the ...
08/10/2026

Outdoor Isolation You Can Count On.

Outdoor electrical installations demand equipment designed to handle exposure to the elements.

The Himel HWSD Weatherproof Switched Isolator range combines reliable local switching with a robust IP66 weatherproof enclosure, providing a practical isolation solution for external applications.

With multiple pole and current ratings available, installers can select the configuration best suited to the requirements of the installation.
- IP66 protection against dust and powerful water jets
- 1P, 2P, 3P and 4P configurations
- 20 A, 35 A and 63 A rated operational current options
- PC enclosure construction
- IEC 60947-3 standard listed

From outdoor equipment and machinery to external electrical installations, the HWSD range provides protected, accessible isolation where you need it.

Available from stock through CED, with a range of configurations to suit different applications. Contact our team to discuss your requirements.
📞 087 703 0888
📧 [email protected]

Control Temperature. Protect Performance.Temperature changes inside electrical enclosures can have a significant impact ...
28/09/2026

Control Temperature. Protect Performance.

Temperature changes inside electrical enclosures can have a significant impact on the reliability and lifespan of sensitive components.

Excessive heat can shorten equipment life and contribute to downtime, while low temperatures can lead to condensation and potential equipment damage.

The TOSUNlux KT & KTS Thermostat Range provides a compact and reliable solution for automatically controlling enclosure heaters and cooling fans to help maintain the correct operating temperature inside control panels.

⚡ KT011 – Normally Closed thermostat for heater control
⚡ KTS011 – Normally Open thermostat for cooling fan control
⚡ ZR-011 – Dual thermostat for independent heater and fan control

With DIN rail mounting, compact construction and reliable snap-action switching, the range integrates easily into new and existing panel designs.

For panel builders, OEMs and automation specialists, effective temperature management helps prevent condensation, protect components and extend equipment life.

Control Temperature. Protect Performance.

The TOSUNlux KT & KTS Thermostat Range is available from CED South Africa.

📩 Contact the CED team for pricing and technical support.

www.cedsa.co.za
[email protected]

Protect Your Electrical InstallationPower fluctuations can do more than interrupt your supply — they can damage valuable...
23/09/2026

Protect Your Electrical Installation

Power fluctuations can do more than interrupt your supply — they can damage valuable electrical equipment, shorten equipment life and result in unnecessary downtime.

The Tosunlux TDP2 Digital Voltage Protector provides an intelligent layer of protection by continuously monitoring the incoming electrical supply and responding when conditions move outside preset limits.

- Adjustable over-voltage protection
- Adjustable under-voltage protection
- Adjustable over-current protection
- Automatic reconnection once supply stabilises
- Real-time voltage and current display
- Easy DIN rail installation

When an unsafe voltage condition is detected, the TDP2 automatically disconnects the load, helping to protect connected equipment. Once the supply returns to acceptable levels, it automatically reconnects — providing protection without unnecessary intervention.

Suitable for residential and commercial applications, the TDP2 offers a simple, practical way to help safeguard electrical installations against an unstable power supply.

Smart protection. Automatic response. Greater peace of mind.

The Tosunlux TDP2 Digital Voltage Protector is available from CED South Africa.

📩 Contact the CED team for pricing and technical support.

www.cedsa.co.za
[email protected]

Engineered to Perform. Ready to Install.When it comes to pump control, building panels from scratch can add unnecessary ...
16/09/2026

Engineered to Perform. Ready to Install.

When it comes to pump control, building panels from scratch can add unnecessary time, wiring complexity and commissioning delays to a project.

CED South Africa, in partnership with Power Factor Systems, supplies HIMEL Pre-Built VSD Pump Panels that arrive professionally engineered, factory tested and ready for installation.

- Pre-built and factory tested
- Available from stock
- Reduced installation and commissioning time
- Reduced risk of wiring errors
- HIMEL automation technology
- Local technical support

Designed for applications including irrigation, pressure boosting and water reticulation, these ready-built panels provide a practical, reliable solution for installers and contractors who need to get projects up and running efficiently.

Instead of starting with a panel build, you can start with a solution that's already built, tested and ready to go.

Ready-Built. Tested. Ready for Installation. Backed by 24hr technical support.

HIMEL Pre-Built VSD Pump Panels are available from stock through CED South Africa.

📩 Contact the CED team for pricing and technical advice.

www.cedsa.co.za
[email protected]

New Design. Same Trusted Performance.The ABB SR200T Formula Miniature Circuit Breaker range has a fresh new look — while...
11/09/2026

New Design. Same Trusted Performance.

The ABB SR200T Formula Miniature Circuit Breaker range has a fresh new look — while delivering the same trusted performance customers have come to expect from ABB.

The refreshed SR200T combines a modern new appearance with the same quality, safety, performance and pricing.

⚡ Same 3kA breaking capacity
⚡ Same C Curve characteristics
⚡ Same ABB quality and reliability
⚡ Same pricing
⚡ Fresh, modern design

Available in ratings from 6A to 63A, with 1P, 1P+N, 2P, 3P and 4P configurations, the SR200T range features clear ON/OFF indication, laser-printed technical information, QR code access to product information and IP20 finger-safe terminals.

For contractors, panel builders, OEMs and installers, it means a refreshed product with no compromise on the performance, safety or value they already know and trust.

A fresh face. The same trusted performance.

The refreshed ABB SR200T Formula MCB range is available now from CED South Africa.

Contact the CED team for more information and availability.
www.cedsa.co.za
[email protected]

Everything between the solar panels and the inverter. A successful solar installation depends on more than just panels a...
25/08/2026

Everything between the solar panels and the inverter.

A successful solar installation depends on more than just panels and inverters.

CED supplies a complete TOSUNlux Renewable Energy portfolio, providing installers with a single source for the protection and balance-of-system components required across residential, commercial and industrial PV projects.

From DC protection to installation accessories, we've got your renewable energy requirements covered.

- DC MCBs & Surge Protection
- DC Rotary Isolators
- PV Pre-wired Combiner Boxes
- MC4 Connectors
- Distribution Enclosures
- Solar Installation Accessories

One trusted supplier. Complete renewable energy solutions.

📞 087 703 0888
🌐 www.cedsa.co.za

Intelligent Machine Control at Your Fingertips.In modern automation, having the right information available at the right...
23/08/2026

Intelligent Machine Control at Your Fingertips.

In modern automation, having the right information available at the right time makes all the difference.

The Himel HG Series HMI gives operators a clear, intuitive interface between people and machines — providing real-time visibility, simplified control and easier management of automated processes.

Available in 7-inch and 10.1-inch touchscreen models, the HG Series combines responsive performance, flexible communication and a user-friendly interface to create a powerful visualisation platform for modern machinery and control systems.

See more. Control more. Respond faster.

⚙️ High-resolution touchscreen display
⚙️ Ethernet and RS485 communication
⚙️ USB connectivity
⚙️ IP65 front protection
⚙️ High-speed processing for responsive operation
⚙️ Seamless integration with Himel PLCs and many other brands
⚙️ Designed for industrial machine and process control

From monitoring machine status and operating parameters to alarms, process information and operator controls, the HG Series puts critical information exactly where it is needed — at the operator's fingertips.

Combined with Himel PLCs, Variable Speed Drives and other automation products, the HG Series can form part of a complete, integrated control solution for machine builders, OEMs, panel builders and industrial automation applications.

Smarter visualisation. Faster control. Better automation.

Discover the Himel HG HMI Range, available from CED South Africa.

📞 087 703 0888
🌐 www.cedsa.co.za

Address

7 Enterprise Close, Linbro Business Park
Sandton

Opening Hours

Monday 07:30 - 16:30
Tuesday 07:30 - 16:30
Wednesday 07:30 - 16:30
Thursday 07:30 - 16:30
Friday 07:30 - 16:30

Alerts

Be the first to know and let us send you an email when Consolidated Electrical Distributor South Africa posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Consolidated Electrical Distributor South Africa:

Shortcuts

Share

Nearby equipment services