Modern Plastics

06/03/2026

Acetal/POM can be a strong material choice for many wear, motion, and precision support parts, but it is not a universal replacement for metal or every high-performance plastic.

In mining and harsh industrial environments, acetal may be useful for:
• Conveyor bushings
• Chain guides
• Low-friction rails
• Pump and valve components
• Sensor housings
• Hydraulic support parts
• Equipment internals

It is generally not the right fit for extreme abrasion zones, structural load-bearing parts, high-heat areas, or highly aggressive chemical environments.

That is where material selection matters. Sometimes acetal is the right answer. Other times, UHMW, nylon, PTFE, PEEK, PPS, stainless steel, or another material may be the better fit.

Read more here: https://modernplastics.com/acetal-pom-mining-equipment

Email us here: [email protected]
ISO 9001:2015 | AS9100D | AS9120B | ISO 13485:2016 Certified

Acetal POM mining equipment components can support conveyor bushings, chain guides, pump parts, valve supports, sensor housings, and medium-duty wear applications.

06/02/2026

Acetal/POM is often used in equipment that needs to move, spray, pump, adjust, or hold tight tolerances over repeated cycles.

In agriculture, acetal may be used for:
• Irrigation fittings
• Sprayer nozzles
• Pump gears
• Valve components
• Seeder mechanisms
• Equipment bushings

In transportation, acetal is commonly used for:
• Fuel system components
• Door lock mechanisms
• Window regulator gears
• Seat adjustment parts
• HVAC gears and controls
• Wire harness clips and sensor mounts

Across both markets, acetal’s value is tied to precision motion, low friction, moisture resistance, and reduced corrosion compared with some metals.

Read more here: https://modernplastics.com/acetal-pom-agriculture-equipment

Email us here: [email protected]
ISO 9001:2015 | AS9100D | AS9120B | ISO 13485:2016 Certified

Acetal POM agriculture equipment components can support irrigation fittings, sprayer nozzles, pump gears, bushings, valves, and greenhouse systems.

06/01/2026

Acetal/POM is often used behind the scenes in energy and renewable energy systems.

It is usually not selected as a primary structural material for extreme heat, pressure, or chemical exposure. Instead, it may be used for precision support components where electrical insulation, low friction, wear resistance, and dimensional stability matter.

Potential applications include:
• Connector bodies
• Cable clamps and supports
• Solar tracker gears and bushings
• Wind system sensor mounts
• Battery assembly fixture blocks
• Fluid-control components in moderate-duty systems

For renewable energy, acetal is often a balance-of-system material that helps support movement, insulation, organization, and repeatability inside larger equipment assemblies.

Read more here: https://modernplastics.com/acetal-pom-alternative-energy-applications

Email us here: [email protected]
ISO 9001:2015 | AS9100D | AS9120B | ISO 13485:2016 Certified

Acetal POM alternative energy applications include solar tracker parts, wind sensor supports, EV charging components, battery fixtures, and insulating spacers.

05/29/2026

Material handling is one of the strongest application areas for acetal/POM.

In conveyors, packaging machinery, warehousing systems, and automation equipment, acetal is often used because it supports low-friction, repeatable motion with less maintenance than many metal components.

Typical applications include:
• Conveyor chain links
• Slat chains
• Guide rails
• Rollers
• Sprockets
• Star wheels
• Timing screws
• Pick-and-place components

When speed, wear resistance, dimensional stability, and lower lubrication needs are priorities, acetal may be a strong material option.

Read more here: https://modernplastics.com/acetal-pom-material-handling-components

Email us here: [email protected]
ISO 9001:2015 | AS9100D | AS9120B | ISO 13485:2016 Certified

Acetal POM material handling components can support conveyor guides, rollers, sprockets, timing screws, wear strips, and automation change parts.

05/26/2026

In heavy equipment applications, acetal/POM is often used as a precision support material.

It can be a strong option for moderate-duty parts where low friction, wear resistance, dimensional stability, and corrosion resistance matter.

Common uses include:
• Hydraulic and fluid power components
• Pump bushings
• Valve parts
• Hose connectors
• Sliding wear strips
• Chain guides
• Sensor housings
• Cab and operator control components

For construction, agriculture, mining support, and material handling equipment, acetal can help support smoother motion, reduced noise, and lower lubrication needs in the right application.

Read the full blog here: https://modernplastics.com/acetal-pom-heavy-equipment-components/

Email us here: [email protected]
ISO 9001:2015 | AS9100D | AS9120B | ISO 13485:2016 Certified

Acetal POM heavy equipment components can support bushings, valve parts, wear pads, sensor housings, fluid power parts, and cab control mechanisms.

05/21/2026

Food processing and packaging equipment depends on materials that can support clean, repeatable movement.

Acetal/POM is commonly used in food and beverage equipment for parts such as:
• Conveyor chain links
• Guide rails
• Star wheels
• Timing screws
• Bushings and bearings
• Sprockets, rollers, and wear strips

Certain food-grade acetal formulations may be suitable for food-contact applications, but the specific grade and compliance documentation should always be confirmed.

Acetal is often valued for its low friction, wear resistance, low moisture absorption, and ability to be machined into custom replacement parts.

Read more here: https://modernplastics.com/acetal-pom-food-processing-equipment/

Email us here: [email protected]
ISO 9001:2015 | AS9100D | AS9120B | ISO 13485:2016 Certified.

Acetal POM food processing equipment components can support conveyor guides, rollers, star wheels, timing screws, bushings, and wear strips in food and packaging lines.

05/20/2026

In medical and healthcare applications, material selection matters.

Acetal/POM is often used for non-implant mechanical components where precision, low friction, dimensional stability, and repeatable performance are important.

Common examples include:
• Surgical instrument handles and mechanisms
• Drug delivery device internals
• Diagnostic equipment gears, rollers, and bushings
• Sterilization tray inserts and positioning guides
• Hospital equipment adjustment components

For medical use, the exact grade, sterilization method, patient-contact requirements, and documentation expectations should always be reviewed before specifying a material.

Email us here: [email protected]
ISO 9001:2015 | AS9100D | AS9120B | ISO 13485:2016 Certified

05/18/2026

Acetal, also known as POM or polyoxymethylene, is a strong material option for many precision moving parts.

It is often used when parts need:
• Low friction
• Wear resistance
• Dimensional stability
• Clean machinability
• Reliable repeat motion

That is why acetal appears in many industries, including medical devices, food processing, material handling, heavy equipment, transportation, and energy.

It is not the right fit for every environment, especially where extreme heat, aggressive chemicals, or heavy structural loads are involved. But for many motion and wear applications, acetal can be a practical alternative to metal or other plastics.

Read more here: https://modernplastics.com/acetal-pom-for-medical-components

Email us here: [email protected]
ISO 9001:2015 | AS9100D | AS9120B | ISO 13485:2016 Certified.

Acetal POM for medical components can support gears, rollers, handles, housings, and other precision medical device parts where low friction and dimensional stability matter.

05/15/2026

Immediate Warehouse Positions & Machine Operator Openings at Modern Plastics

Join an established Shelton company with 81 years of strength, stability, and opportunity.

NOW HIRING: Warehouse Material Handler & Experienced CNC Saw / Router Operators

Modern Plastics is currently hiring for immediate openings at our Shelton, Connecticut, facility.

We are looking for dependable, motivated, hard-working people who want to be part of an excellent company with a long-standing reputation for quality, service, and stability.

Modern Plastics has been in business for 81 years, and we are proud of the people, customers, and community we serve.

Open Positions Include:
Full-Time: 8:00 A.M. to 4:30 P.M.
Warehouse Material Handler

Responsibilities include pulling and scanning orders using a scan gun, preparing and palletizing material for truck shipments, handling inventory, and supporting daily warehouse operations.
Experienced CNC Saw and Router Equipment Operators
Previous CNC saw and/or router experience is required. Candidates must have computer knowledge, be comfortable using measuring devices, and be able to perform some cutting work using a chop saw.

Requirements:
Candidates must be reliable, detail-oriented, safety-conscious, and able to work in a fast-paced manufacturing and warehouse environment. Must be able to lift up to 50 lbs.
Benefits and Opportunity:
We have immediate openings with full health and company benefits, profit sharing, vacation, and long-term growth after a successful trial period.

Company Location:
Modern Plastics
88 Long Hill Cross Road
Shelton, CT 06484

To apply, please email your resume or work information to:
Chris Acosta, General Manager, Email:
[email protected]
In your e-mail subject line, insert: "Employment – Chris Acosta"
Chris may also be reached by phone at:
203-333-3128, Extension 230

Modern Plastics is an excellent company with a proud history, a strong future, and a team-focused work environment.
If you are dependable, experienced, and ready to work, we want to hear from you.

https://modernplastics.com/positions-available-at-modern-plastics/

05/08/2026

Many plastic part problems start before the material is even ordered.

When teams skip over the environment, tolerances, wear conditions, or process requirements, it can lead to the wrong material choice from the start.

A better result usually begins with a better upfront conversation.
If your team is evaluating materials, Modern Plastics can help guide the conversation.

Email us here: [email protected]
ISO 9001:2015 | AS9100D | AS9120B | ISO 13485:2016 Certified