What are the opening hours?

Monday 7:30am - 4:30pm Tuesday 7:30am - 4:30pm Wednesday 7:30am - 4:30pm Thursday 7:30am - 4:30pm Friday 7:30am - 4pm

Equipment Pro Inc.

Name: Equipment Pro Inc.
Address: 721 Parkwood Drive, Sainte Genevieve, MO, 63670, US
Telephone: +15738832373

Call Directions Website Contact the business

Equipment Pro Inc. has been in business since 1997. With experience in pumping and designing systems we can help process system

We can supply anything from valves, pumps, mixers, tanks, pump parts, and instrumentation to completely designed systems.

10/31/2026

😂 Happy National Knock Knock Joke Day! 🚪
Knock knock jokes might make us laugh, but pumps not working isn't funny.
When critical equipment goes down, it can lead to costly downtime, lost productivity, emergency repairs, and frustrated operators. That's no joke.
At Equipment Pro, we help keep your pumps and rotating equipment operating at peak performance through expert service, maintenance, repairs, and reliability solutions designed to prevent unexpected failures before they happen.
✅ Reduce downtime
✅ Improve reliability
✅ Extend equipment life
✅ Keep your operation running smoothly
Don't wait for a breakdown to answer the door.
Let Equipment Pro help keep your pumps working properly, so your operation never misses a beat.

10/31/2026

🎃👻 Pumps can be scary... but unexpected downtime is even scarier!
At Equipment Pro, we're here to keep the spooks away and make sure your pumps and systems keep running smoothly. Whether it's preventative maintenance, troubleshooting, repairs, or replacement parts, our team is ready to help before a small issue turns into a Halloween nightmare.
The pumps may be dressed up for Halloween, but don't let equipment problems haunt your operation. Leave the scares for Halloween and trust Equipment Pro to keep your operation flowing all season long.
Wishing everyone a safe and Happy Halloween from the Equipment Pro team! 🎃🕸️

10/30/2026

🧟⚡ Happy Frankenstein Day! ⚡🧟
Just because a pump is made from a few replacement parts, upgrades, repairs, and years of hard work doesn't mean it's ready for the graveyard!
If you've got a "Frankenstein Pump" keeping your operation moving, make sure it's still alive and running with proper inspections, maintenance, and performance checks.
✅ Check vibration levels
✅ Monitor seals and bearings
✅ Verify flow and pressure
✅ Schedule preventative maintenance
At the end of the day, it doesn't matter if your pump has a few stitches, patches, or upgraded parts. What matters is that it's reliable when you need it most.
Keep your pumps alive, healthy, and pumping strong.

10/29/2026

Heavy-duty industrial disc pump featuring a 14-inch disc/impeller and size 2X4-14 casing
Impeller / Discpac: 14-inch diameter (Discpac: 2HHDH-MX350) using boundary layer and viscous drag principles instead of conventional vanes.
Material of Construction: 316 Stainless Steel (316SS).
Operating Capabilities: Handles shear-sensitive, viscous, abrasive, and gas-entrained fluids, and can run dry or deadheaded without damage.
Certifications: CE and ATEX II 2G D c ratings.
, , ,

10/28/2026

🇺🇸 National First Responders Day 🇺🇸

Today, we honor the courageous men and women who answer the call when our communities need them most. From police officers and firefighters to EMS personnel and dispatchers, first responders serve on the front lines every day, often putting themselves in harm's way to protect and care for others.

Your dedication, sacrifice, and unwavering commitment make our communities safer, stronger, and more resilient.

As your badge proudly states, you are truly "First to the Fight."

Thank you for your service, your courage, and your selflessness. We are grateful for everything you do, today and every day.

🚓 🚒 🚑

Happy National First Responders Day!

🇺🇸

10/27/2026

A close-coupled pump is a type of centrifugal pump where the pump impeller mounts directly onto an extended motor shaft, sharing a single, common shaft with the motor instead of using a separate bearing frame or flexible coupling.
Key Features & Design
Single Shaft: The motor shaft extends straight into the pump casing to hold the impeller and mechanical seal.
No Alignment Needed: Eliminates the need for field shaft alignment, bed plates, or flexible couplings during installation.
Compact Footprint: Requires significantly less space than frame-mounted alternatives.
No Internal Pump Bearings: The motor bearings handle all radial and axial thrust loads.
Advantages
Easy Installation: Faster to set up and requires fewer parts to maintain.
Lower Initial Cost: Budget-friendly for low-to-medium-duty applications.
Space Saving: Ideal for tight mechanical rooms or skids.
Back-Pullout Design: Many models let you access the impeller without disturbing the main pipework.
Common Applications
Residential and commercial water circulation
Booster and liquid transfer systems
HVAC cooling and heating loops
Spraying and general-purpose industrial service
, , , ,

10/27/2026

🇺🇸🍺 Behind every great American b**r is a lot more than hops and barley.
It's the pumps that transfer it, circulate it, cool it, ferment it, clean it, and package it.
Today we're celebrating the equipment that helps keep American breweries moving and American b**r flowing.
From Grain to Glass, Pumps Make It Possible.
Happy National American B**r Day!
**rFlowing **rDay **rIndustry

10/26/2026

The AMT Heavy Duty Straight Centrifugal Pump is a commercial-grade, heavy-duty industrial pump built for high-volume liquid and chemical transfer, booster service, and dirty water handling.
Key Specifications
Type: Straight centrifugal pump (not self-priming; requires flooded suction)
Flow Rate: Up to 500 GPM (Gallons Per Minute)
Horsepower: 10 HP, 230/460V, 3-phase TEFC (Totally Enclosed Fan-Cooled) motor
Port Size: 3" x 3" NPT discharge and suction
Construction: Heavy-duty cast iron casing with a stainless steel semi-open impeller
Solids Handling: Capable of passing up to 1/4-inch diameter solids
Seals: Type 21 mechanical seal and O-ring casing seal

10/24/2026

Ever wonder what role pumps play in making your favorite foods? 🥪⚙️

From mixing and emulsifying ingredients to transferring product for stuffing and packaging, pumps help keep bologna production moving efficiently every step of the way.

Whether it's b**r, bologna, or countless other everyday products, pumps work behind the scenes to keep production flowing and help bring America's favorites to the table.

10/23/2026

An internal gear pump is a rotary positive displacement pump that moves fluid using a "gear-within-a-gear" design.
How It Works
• Core Components: It features a larger outer gear (rotor) that drives a smaller inner gear (idler) on a fixed pin, separated by a stationary crescent-shaped divider.
• Suction: As the teeth disengage near the suction port, a low-pressure zone forms, drawing liquid into the locked cavities between the gear teeth.
• Sealing: The crescent acts as a seal that prevents the fluid from flowing backward to the suction side.
• Discharge: As the teeth mesh completely on the opposite side, the fluid is forced out through the discharge port.
Key Benefits
• Wide Viscosities: Handles low- to high-viscosity fluids (such as oils, fuels, asphalt, adhesives, and food products) effectively.
• Smooth Flow: Delivers a quiet, steady, and nearly pulse-free flow.
• Self-Priming: Capable of strong suction and vacuum lift directly from tanks or sumps.
• Reversible: Can often run in either rotational direction to reverse the flow of fluid.

Address

721 Parkwood Drive
Sainte Genevieve, MO
63670

Opening Hours

Monday	7:30am - 4:30pm
Tuesday	7:30am - 4:30pm
Wednesday	7:30am - 4:30pm
Thursday	7:30am - 4:30pm
Friday	7:30am - 4pm

Telephone

+15738832373

Website

https://www.instagram.com/equipmentpro5738832373/, https://www.linkedin.com/company/112940182/admin/dashboard/, http://w

Alerts

Be the first to know and let us send you an email when Equipment Pro Inc. posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.