LEO Agriculture

LEO Agriculture The company history dates back to the late 1980’s and has a deeply rooted history in the agriculture industry.

LEO has grown into a progressive company with new units being released yearly. To pass on the LEO vision of quality,service, and producing a product that our employees are proud of to the farming industry.

09/05/2026

KZN AGRI management & consulting doesn’t just sell the LEO 2010, they show it working.
In their demos, farmers see:
• Even side-discharge spread
• Stainless steel hopper that lasts
• One machine for liquid and solid manure
That’s why customers leave satisfied.
Want a demo in KZN? Talk to Hendrik today.

The LEO Diamond auger creates a square cutting design. When knives are correctly placed, bales and long roughage are for...
07/26/2026

The LEO Diamond auger creates a square cutting design. When knives are correctly placed, bales and long roughage are forced downward into a high-pressure zone. This pressure drives the knives to cut efficiently, increasing processing speed while reducing fuel use and mix time. On twin-auger machines the pressure zone between the two augers further improves cutting from both sides.
Knife Placement Is Critical
Knife position must match the ration:

Ration Type Recommended Knife size for top 2 spots:

Pre-chopped roughage:
Auger = Large 2 piece knife ontop in "IN Position"
Contra/Side Knifes: IN Position

Round bales / Napier / Alfalfa (If your baler has built in knives)
Auger = Small knife on top and Large 2 Piece knife in "IN Position" in the next lower flex spot.
Contra/Side Knifes: Start in OUT Position and move to IN Position after 5 Minutes.

Round bales / Napier / Alfalfa (No cutting knives in baler)
Auger= Small knife on top and small knife in the next lower flex spot.
Contra/Side Knifes: Start in OUT Position and move to IN Position after 10 Minutes.

High-density silage: (little roughage)
Auger=Large knife on top

LEO ships every machine with a standard “catch-all” layout optimized for the most common roughage and round-bale rations.

The top knife positions are designed to accept multiple knife types so operators can fine-tune as they gain experience. The 2 piece knife blades themselves can also be adjusted in or out on the auger for optimum processing.

Key Operating Principles

The faster roughage reaches the middle and bottom high-pressure zones, the faster it processes.
More knives does not mean better cutting.
Round bales need space to drop into the cutting zone — they should not bob on top of the knives.
The core of the bale must transfer into the pressure spot for the fastest results.
A large knife in the top position can work with high-density silage mixes, but may cause spilling when processing whole round bales.

The LEO Diamond auger is intentionally flexible. Start with the standard configuration, then adjust knife layouts to match your specific rations for maximum efficiency.

LEO Auger Flow Innovations – ExplainedThe LEO vertical mixer auger is engineered with five specific features that work t...
07/25/2026

LEO Auger Flow Innovations – Explained
The LEO vertical mixer auger is engineered with five specific features that work together to improve material flow, reduce horsepower demand, and deliver a more consistent TMR:

1. Slanted Auger Top
Eliminates the dead spot that normally forms on top of a conventional auger. Feed doesn’t sit on the auger cap, and the angled surface also acts as an extra mixing paddle.

2. Angled Ripping Blades
The blades are set at an aggressive angle to improve bale tearing and processing speed. Whole round or square bales are broken down faster with controlled cutting action.

3. Hockey Stick Kicker
The signature “hockey stick” shape acts like a cupped scoop. It actively sweeps material away from the side wall and lifts it onto the flighting — the key to eliminating wall dead zones and keeping the mixing chamber action strong. (Bolt-on available in 3 different sizes)

4. V-Shaped Leading Edge
Functions like a snow plow or grader blade. The angled leading edge naturally forces material toward the center of the auger instead of letting it pack against the wall. This reduces horsepower requirements and accelerates overall material flow.

5. Hay Knife Reliefs
Strategic cutaways in the flighting allow long-stem forage to fold over the knife edge (similar to folding a rope before cutting it). This makes cutting easier and more efficient while reducing stress on the knives and drive system.

Together these features give LEO mixers faster mix times, lower power demand, and more uniform rations compared with conventional vertical auger designs.

Be sure to install our LEO App for all information and mixer tools
07/05/2026

Be sure to install our LEO App for all information and mixer tools

07/03/2026

LEO TMR Mixers has the fastest particle transfer and cutting speed on the market saving you time and fuel. Notice halfway through this video how quickly the LEO machines transfers molasses between the front and rear auger.

We would like to welcome our newest distributor KZN AGRI MANAGEMENT AND CONSULTING in Nottingham Road KZN. If you are lo...
06/27/2026

We would like to welcome our newest distributor KZN AGRI MANAGEMENT AND CONSULTING in Nottingham Road KZN. If you are looking for one of the best mixing TMR feed mixers on the market contact them today for a quote on a LEO!

Old Main Road R103
Nottingham Road, KwaZulu-Natal, 3820
+27 83 447 1881

The improved LEO 7013VT is officially our newest favorite machine. Ready to tackle any ration with one of the most homog...
06/23/2026

The improved LEO 7013VT is officially our newest favorite machine. Ready to tackle any ration with one of the most homogeneous mixes on the market.

🌾 Did you know? LEO Agriculture is your go-to partner for WHITE LABEL & OEM manufacturing! 🌾We don’t just build world-cl...
04/28/2026

🌾 Did you know? LEO Agriculture is your go-to partner for WHITE LABEL & OEM manufacturing! 🌾
We don’t just build world-class TMR Feed Mixers and Manure Spreaders under our own name — we already produce high-volume equipment for other successful brands around the globe.
✅ Your design OR our proven designs
✅ Full customization to match your exact needs — including our signature decagonal sidewalls (faster bale processing, better mix quality) or traditional round sidewalls
✅ Flexible production runs, competitive pricing, and industry-leading quality
With modern manufacturing facilities across 3 continents (North America • Asia • Africa), we deliver shorter lead times, scalable capacity, and true global reach.
Whether you’re a growing distributor, OEM, or established brand ready to expand your lineup without building your own factory…
LEO Agriculture is ready to manufacture for YOU.

🚜 Big News from LEO Agriculture! 🌾We’re excited to promote our small mixer lineup in 3, 4, and 6 cubic meter capacities!...
04/24/2026

🚜 Big News from LEO Agriculture! 🌾
We’re excited to promote our small mixer lineup in 3, 4, and 6 cubic meter capacities! Compact, efficient, and built for farms that need serious mixing power without taking up the whole yard.
And that’s just the beginning…
We’re expanding our manure spreader lineup with brand-new ground drive and PTO-driven box spreaders featuring horizontal beaters, coming soon to join our proven 20 Series 1006 and 1008 models.
Ideal for small operations and hobbyists.
Whether you’re mixing feed or spreading manure, LEO is bringing you more choices, more reliability, and more ways to get the job done right.
📅 Official launch dates and full specs dropping soon!

04/24/2026

LEO Agriculture vertical mixer are some of the fastest mixing & fastest cutting machines on the market.

Address

Monroe, WI
53566

Opening Hours

Monday 8am - 5pm
Tuesday 8am - 5pm
Wednesday 8am - 5pm
Thursday 8am - 5pm
Friday 8am - 5pm
Saturday 1am - 3pm

Website

Alerts

Be the first to know and let us send you an email when LEO Agriculture posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share