Lonn Manufacturing Co. Indianapolis, IN

Name: Lonn Manufacturing Co. Indianapolis, IN
Address: 5450 W 84th Street, Indianapolis, IN, 46268, US
Telephone: +13178971440

Home
United States
Indianapolis, IN
Lonn Manufacturing Co. Indianapolis, IN

Call Directions Website Contact the business

IF IT DOES NOT SAY LONN, IT'S NOT THE ORIGINAL MADE IN THE USA

10/27/2026

-40°F. That's the bottom of the rated range for Lonn custom hose, which stays flexible in the cold instead of stiffening up. EPDM rubber, polyester reinforcement, 200 PSI max, cut to any length from 1 to 700 feet.

Get a quote before the first hard freeze: https://lonn.net/custom-hose/

10/20/2026

If your boat is coming out of the water this month, start with the bilge. Water and debris left sitting all winter give corrosion and odors a head start by spring.

A rubber-tipped blowgun like the Air Saver Model Win clears compartments, seams, and tight corners without scratching gelcoat or painted hulls, and its brass and stainless valve resists salt spray. Follow it with a leak-free Water Saver nozzle for the washdown, and two tools handle both the blowout and the rinse.

Our marine lineup: https://lonn.net/industries-we-serve/boating/

What's on your haul-out checklist this year?

10/13/2026

Cold October mornings, gloves on, and a blowgun trigger small enough to miss. The Air Saver Model Win doesn't have one. Pick it up and flex the rubber nozzle: a slight bend gives you a light puff; a full bend gives you a full blast. The brass and stainless steel valve inside is built to keep working even after a truck or forklift rolls over it.

See how it works: https://lonn.net/product/air-saver-model-win/

10/06/2026

Fall cleanup means a lot of hose time: rinsing mowers, trailers, and muddy boots before they're put away for winter. Watch the Water Saver Jet Stream go from a drizzle to a full jet with one hand, then stop the moment you let go. There's no trigger to squeeze, and the brass head can be stepped on or driven over and keep working.

https://lonn.net/product/water-saver-jet-stream/

09/22/2026

Not sure if a Lonn nozzle fits your setup? Here's the short answer: if you're doing industrial cleaning, degreasing machinery, food-processing sanitation, or general maintenance, it probably does. Our nozzles and cleaning guns also handle applying chemicals, oils, stains, and sealers, including tough caustic or acidic solutions. That covers manufacturing floors, food production lines, and equipment rental turnarounds, among others. Drop your application in the comments, and we'll tell you exactly which nozzle fits: https://lonn.net/product/heavy-duty-water-saver-nozzle-model-a-open-flow/

09/15/2026

Brew, clean, sanitize, repeat — that's the cycle every brewery runs on, and it leaves little room for equipment that can't keep pace. Hot water and caustic or acidic cleaning agents wear down standard nozzles fast, and a nozzle that leaks or fails under heat and pressure slows cleanup—and the next brew with it. Lonn's heavy-duty water savers are built for that exact routine: no shutoff valve to manage, no degrading rubber to worry about, just a nozzle that keeps working batch after batch. See how it fits into a brewery's cleaning routine: https://lonn.net/industries-we-serve/breweries/

Does your cleanup equipment ever become the bottleneck between batches?

09/11/2026

The music was live at the beach :)

09/10/2026

175 PSI. 12 BAR. That's what our Heavy Duty Water Saver Model A Open Flow is rated to handle. The neoprene hose end's wrapped in 3-ply reinforcement, and there's no manual shutoff to manage — flex it to start the flow, release to stop. If your current nozzle can't keep up with that kind of pressure, it's time for an upgrade: https://lonn.net/product/heavy-duty-water-saver-nozzle-model-a-open-flow/

09/03/2026

September means schedules are back to full speed — and so is the wear and tear on your cleanup gear. If your nozzle can't handle high pressure and high heat without leaking or sticking, it'll slow you down every shift this month. Our Heavy Duty Water Saver Model A Open Flow is built for exactly that kind of pressure: flex the hose end to start the flow, let go to stop it, no shutoff valve required. Check it out here: https://lonn.net/product/heavy-duty-water-saver-nozzle-model-a-open-flow/

What's the one piece of cleanup equipment you wish would just stop breaking down on you?

08/25/2026

When we checked in with Dave W. about the siphon spray gun, water nozzle, and air blow gun he picked up from us, he had a full report ready.

He'd used all three that same morning: the blow gun to clear leaves off his car, the water nozzle to rinse it down, and the siphon gun to spray on degreaser and cut through the grease.

Three tools, one car, done right.

Thanks for letting us share this, Dave!

Address

5450 W 84th Street
Indianapolis, IN
46268

Telephone

+13178971440

Website

http://lonn.net/

Alerts

Be the first to know and let us send you an email when Lonn Manufacturing Co. Indianapolis, IN posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.