Titebond

10/12/2026

Ask any woodworker about glue-ups and you'll hear the same thing: it's the most satisfying part of a build and also the most stressful. Once the glue is on, the clock is ticking to get every joint together and clamped.
woodwork in Perth, Western Australia used Titebond III Ultimate Wood Glue for this Archer Bench glue-up. Its longer open time helps on bigger assemblies like this one, when there's a lot to line up before it sets.

10/09/2026

Adding a base is one of the easiest ways to transform a piece of furniture, and it's more beginner-friendly than you might think.

shared how they build theirs: red oak 2x2s for the legs, 1x3s for the aprons, pocket hole joints, and Titebond Quick and Thick to lock it all together. Their advice for first-timers is to number the legs, mark every pocket hole location with an arrow, and drill pilot holes so the wood doesn't split.

Most important of all, check the structure of your piece first. The base needs to attach to solid hardwood, not decorative trim. If that support isn't there, build it in first or skip the base.

10/08/2026

We are delighted to have been part of the Grain2Grain fundraising event this past weekend benefitting the Katz-Moses Woodworkers With Disabilities Fund, a fund helping makers with disabilities get tools, equipment and resources they need for their woodworking pursuits. Hosted at the renowned , the event brought woodworking enthusiasts from across the country together to share in passions for woodworking and bourbon, and to help support this worthy cause. A big shout out to and for their collaboration in making this unique event a success.

10/07/2026

Installing panels on a trailer comes with challenges you don't get on a house. Every mile brings vibration, bumps, temperature swings, and weather, and the adhesive has to hold through all of it.

took on this trailer panel job using Titebond Advanced Polymer Panel Adhesive to bond the panels in place.

10/05/2026

Don't walk the floor without a plan. Will we see you at METALCON?

RoofersCoffeeShop rounded up the sessions and exhibitors worth adding to your short list for October 7-9 in Orlando.

Don't miss the main metal event!. Make sure these sessions and exhibitors are on your METALCON short list.

https://www.rooferscoffeeshop.com/post/dont-miss-the-main-metal-event

10/01/2026

Ever wonder why end grain cutting boards look like a checkerboard? It's because they're really dozens of small blocks, each one held together with glue.

built this one the classic way: glue strips into a panel, crosscut it, flip the pieces on end, and glue it all up a second time. That means a lot of glue joints that need to survive knives, water, and plenty of trips to the sink.

For that job they reached for Titebond III Ultimate Wood Glue. It's waterproof and approved for indirect food contact, which makes it a go-to for cutting boards and other kitchen projects.

09/21/2026

Meet Alton's semi, a full-size Peterbilt truck built entirely out of wood, one piece at a time. His son Mike sent these photos in, and it took roughly 5 gallons of glue to hold this whole build together. Projects like this are exactly why we love this community. 🚛

09/21/2026

Thanks for coming to see us at Build Show LIVE, JayCo.Builds!

09/21/2026

Visit the Titebond booth at Build Show LIVE with me!

I have personally only known Titebond for their wood glue products, from woodworking projects like building cabinets, tables and other furniture - turns out they do pretty much everything!

Jessica brings us up to speed very quickly with some of the other offerings. The noteworthy ones to me were:

- The moisture cured sealants, you can apply in the water and it’ll cure or even just the moisture in the air allows this product to cure, and the benefit of that is if the product completely dries out, it’s still flexible!
- The color matched caulking is a game changer too. You can match most major manufacturers window, door and siding colors from using a dropdown selector on their website. They literally made it idiot proof!

If you haven’t checked them out for your projects, you oughta!

09/18/2026

Knowing that every dollar raised at Grain to Grain goes toward grants that put tools, equipment, and shop access into the hands of woodworkers facing accessibility barriers is something that makes us so happy to be a sponsor this year.

Thank you, Titebond.

We’re proud to welcome Titebond as a Distillery tier sponsor of Grain to Grain, our two-day fundraiser at Buffalo Trace Distillery this October.

Every dollar raised at Grain to Grain goes toward grants that put tools, equipment, and shop access into the hands of woodworkers facing accessibility barriers. Sponsors like Titebond are what make that possible.

GRAIN TO GRAIN
October 2 and 3, 2026
Buffalo Trace Distillery
Frankfort, Kentucky

Interested in joining Titebond at the Distillery level or exploring another sponsorship tier? Full details are at the link in our bio. 🔗