Seajet Paint USA

Seajet Paint USA 🇺🇸 Official U.S.

Manufacturers of Seajet Marine Coatings

🛥️ High-Performance Solutions for Boats & Yachts

🌎 Backed by a Global Brand, Delivered with Local Expertise

🛠️ Trusted by Shipyards, Captains & Marine Professionals

Golden hour hits different when it lands on performance. PellerClean in the mix.
06/04/2026

Golden hour hits different when it lands on performance. PellerClean in the mix.

Scrubbing the hull is exactly nobody's favorite weekend activity. 🧽🚫Imagine if your boat actually cleaned itself just fr...
05/30/2026

Scrubbing the hull is exactly nobody's favorite weekend activity. 🧽🚫

Imagine if your boat actually cleaned itself just from you taking it out for a spin. That’s the idea behind SEOSIL. It’s a silicone-based foul-release coating that creates a surface so incredibly slippery, marine growth simply can't hold on. Once you get moving, the water friction literally washes the hull clean as you sail.

Less time paying for mid-season dives, less drag, and way more time just enjoying the water. ⛵️🌊

Who's ready to make the switch to silicone?

05/27/2026

Fouled props will completely kill your performance, and nobody wants to be diving the boat every other week to scrape them down. Here’s the solution: Seajet PellerClean.

It’s a foul-release system specifically designed for propellers and running gear. Because it uses a silicone base instead of traditional biocides, it creates an ultra-slick surface. Once those props start spinning, the water friction alone washes the growth right off.

More speed, better fuel economy, and way less time spent scrubbing. It's a no-brainer. 🚤💨

A flawless bottom job is only as good as the primer underneath it. ⚓️If you want to bulletproof your fiberglass hull aga...
05/24/2026

A flawless bottom job is only as good as the primer underneath it. ⚓️

If you want to bulletproof your fiberglass hull against osmosis, you need a barrier coat that actually does the heavy lifting. Think of Seajet 117 as an absolute shield for your vessel. It locks out moisture, stops corrosion in its tracks, and gives your antifouling the perfect foundation to bite into.

Prep it right the first time, and you won't have to worry about it later. 🛡️🛥️

The final coat does not work alone.PellerClean Primer is a key part of the PellerClean kit because it lays the groundwor...
05/22/2026

The final coat does not work alone.

PellerClean Primer is a key part of the PellerClean kit because it lays the groundwork for the system that follows. On propellers and running gear, that foundation matters — especially when the goal is a more reliable, performance-minded application below the waterline.

The spotlight usually lands on the top layer. The professionals know better.

Nobody wants a bottom paint that works great for the first few months and then completely gives up halfway through the s...
05/20/2026

Nobody wants a bottom paint that works great for the first few months and then completely gives up halfway through the season. 📉

With Seajet 041 Poseidon, you don't have to worry about that drop-off. We formulated this one with a unique release controller that keeps the antifouling protection steady and consistent—every single day your boat is in the water. Less growth, less drag, and a lot less stressing about what's happening under the surface. 🌊🚤

Set it, forget it, and enjoy the ride.

We don't just ship out buckets of paint and call it a day. 👊Recently, the team was on the ground over at Willis Custom Y...
05/18/2026

We don't just ship out buckets of paint and call it a day. 👊

Recently, the team was on the ground over at Willis Custom Yachts doing what we do best. Whether we're walking the yard checking on a fresh bottom job, troubleshooting with the crew, or just talking shop, our guys are always out in the field.

For us, it’s all about making sure you’re getting the absolute best performance out of your Seajet coatings. Real results happen out in the boatyards, not behind a desk!

Hauling out your boat mid-season because your bottom paint quit on you? No thanks. 🙅‍♂️If you want a finish that actuall...
05/16/2026

Hauling out your boat mid-season because your bottom paint quit on you? No thanks. 🙅‍♂️

If you want a finish that actually holds up, Seajet 036 Endurance is the way to go. It gives you that hybrid power—meaning it lays down a hard, super-durable film that fights off fouling well beyond the end of the season. Less time blocked up in the yard, and a lot more time out on the water. 🚤 🌊

Getting the perfect mix doesn't happen by accident. 🧪🚢 Here’s another peek inside the CMP factory!Before our marine pai...
05/14/2026

Getting the perfect mix doesn't happen by accident. 🧪🚢 Here’s another peek inside the CMP factory!

Before our marine paints ever make it into a bucket, it all starts with mixing the absolute best raw materials. Our crew uses these heavy-duty vacuum lifts to safely load minerals into the hoppers—saving backs and keeping the production line running smooth. It takes a ton of hard work (literally!) and serious precision to create the formulas you rely on out on the water.

Swipe through to see where the process begins! 👉

When the focus is running gear performance, PellerClean belongs in the conversation.
05/12/2026

When the focus is running gear performance, PellerClean belongs in the conversation.

Address

1610 Engineers Road
Belle Chasse, LA
70037

Opening Hours

Monday 9am - 5pm
Tuesday 9am - 5pm
Wednesday 9am - 5pm
Thursday 9am - 5pm
Friday 9am - 5pm

Telephone

+15049124778

Website

https://seajet-usa.com/, https://linkin.bio/seajet_paint_usa

Alerts

Be the first to know and let us send you an email when Seajet Paint USA posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category