En-Gen Diesel Products

Name: En-Gen Diesel Products
Address: Unit 15 Faraday Road, Gapton Hall Industrial Estate, Great Yarmouth, NR310NF, GB
Telephone: 01493 738397

Home
United Kingdom
Great Yarmouth
En-Gen Diesel Products

Call Directions Website Contact the business

Providing a one-stop sourcing solution for diesel driven equipment and related spares to the marine,

Providing a one-stop sourcing solution for diesel driven equipment and related spares to the marine, industrial, power generation, construction and oil & gas markets globally. Specialising in Zone II hazardous area diesel and hydraulic powerpacks. We now provide an engine overhaul and repair service from our Great Yarmouth workshop.

30/10/2026

Happy Halloween from the Team at En-Gen Diesel Products !!

28/10/2026

🔄 Out with the old and in with the new for this Kubota V3800.

Powering a generator on a CTV, the current engine had served it's time and was in need of overhaul.

With downtime needing to be kept to a minimum, this new replacement engine was sourced as an exact match, requiring minimal changes during installation.

📞 01493 738397
📧 [email protected]
🌐 www.engen-diesel.com

21/10/2026

❌ Filtration - the last place to cut corners

Utilising premium filtration is the cheapest way to provide optimum protection for oil, fuel and air systems on your engine.

This ensures components like injectors, pumps and bearings operate at their best, and prevent premature failure of expensive parts.

Cheap filters might look the same on the outside, but often don't filter to the same micron ratings, hold up under the same pressures, or last as long.

At En-Gen, we only supply quality filtration from leading manufacturers such as Fleetguard, Donaldson, HiFi, Racor and other trusted brands, as well as genuine filters direct from the engine manufacturers themselves.

For your next requirement, get in touch.

📞 01493 738397
📧 [email protected]
🌐 www.engen-diesel.com

15/10/2026

En-Gen have recently supplied 2 x Caterpillar C18 Power Packs to our client.

Destined for the Oil and Gas industry, these power packs will now be built into a pump application.

These Industrial units are rated at 522 Kw ( 700 BHP ) @ 2100 RPM w/o fan loss and are Industrial Intermittent -C Rating, Tier 3 emission level and with dual turbo exhaust system and dry manifold.

This Power Pack was the perfect choice for this project and has the Caterpillar reliability behind it, along with readily available spares worldwide.

If you have an upcoming project, or requirement for spares, get in touch.

📞 01493 738397
📧 [email protected]
🌐 www.engen-diesel.com

01/10/2026

🔧 Cummins Cooler Maintenance

We recently received a request from a customer to pressure test their coolers from a Cummins 6CTA8.3M Engine. They had been in touch with a fellow engineering company who had passed on our details. Very nice to be recommended and greatly appreciated.

After recently acquiring the boat, it was discovered no anode was present in the charge air cooler leading to concerns with the internal condition. The charge air cooler, oil cooler and gearbox coolers were pressure tested and all passed.

The charge air cooler was very oily and after speaking to the client we cleaned this, removing all the contamination and returning it back to an acceptable condition.

The anode thread was stripped in one end cap, which we drilled and heli-coiled back to standard.

Client was very pleased with the service we provided and for all future requirements we will be notified.

For your next project, get in contact.

📞 01493 738397
📧 [email protected]
🌐 www.engen-diesel.com

25/09/2026

🔧 Yanmar L100 Servicing

Something a bit smaller than usual in the workshop this week.

After supplying a replacement engine in 2024, this pressure washer has been returning to us for its routine engine and gearbox maintenance ever since.

Whether your engine is in a boat, generator, or even a pressure washer, we can assist.

If you're looking for spares, servicing or maybe even a repower, get in touch.

📞 01493 738397
📧 [email protected]
🌐 www.engen-diesel.com

17/09/2026

🔧 Caterpillar C32 Maintenance

We were tasked this week to carry out the 3000 hour maintenance on two CAT C32 engines powering a CTV.

The work scope included checking valve clearances and injector heights, as well as fitting new thermostats, a new water pump and performing a coolant flush.

All works were completed to CAT maintenance guidelines, utilising genuine spares.

After running up the engines, the vessel was handed back over ready to go back to work.

For your next project, get in contact.

📞 01493 738397
📧 [email protected]
🌐 www.engen-diesel.com

09/09/2026

Cold starts are hard on engines, engine heaters solve that.

As official dealers for PowerHeat B.V., we can offer engine preheating solutions from leading manufacturers PowerHeat and Phillips and Temro Industries (including Carlor and ZeroStart).

The full range covers preheating solutions for coolant, diesel, fuel, engine oils, hydraulic oils, and other (industrial) liquids.

All heaters are designed to:

✅ Ensure swift and efficient engine starts
✅ Reduce the wear of engine components
✅ Lower fuel consumption
✅ Prolong battery life
✅ Decrease environmental impact.

If we can assist with your engine preheating requirements, please get in touch or explore the range online.

🌐 https://utm.io/umq5x
📞 01493 738397
📧 [email protected]

02/09/2026

With your engine running and clocking up hours, it's inevitable that maintenance will be required. Performing this on-time and planning ahead, helps to keep costs down and downtime predictable.

We've now taken delivery of the overhaul spares for a CAT G3516 full rebuild, and are ready to undertake the project.

From routine maintenance through to complete overhauls, we're on hand to help.

📞 01493 738397
📧 [email protected]
🌐 www.engen-diesel.com

26/08/2026

Oil analysis is one of the most cost-effective tools in any maintenance programme.

Regular oil sampling helps to detect changes early, verifies oil quality, and supports informed maintenance decisions reducing the risk of unplanned downtime.

The Vision Oil Analysis Kit from Millers Oils checks for:

✅ Viscosity - fuel dilution, oil degradation
✅ Contamination - water, coolant, dust, debris, other oils
✅ Wear Metals - early warning of component wear
✅ Additive Levels - wear and corrosion preventatives deplete over time

🛒 Purchase the kits online, or get in touch for more info.
https://utm.io/ulexI

📞 01493 738397
📧 [email protected]
🌐 www.engen-diesel.com

Address

Unit 15 Faraday Road, Gapton Hall Industrial Estate
Great Yarmouth
NR310NF

Telephone

01493 738397

Website

https://www.engen-diesel.com/, https://www.engendiesel-shop.com/

Alerts

Be the first to know and let us send you an email when En-Gen Diesel Products posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.