Delta Rubber Ltd

Directions Website Contact the business

Delta Rubber Ltd We provide a fast, efficient and friendly service for all your elastomeric requirements Certified to ISO9001:2000

The directors at Delta Rubber, Martin Bailey and Paul Elliott, along with a highly experienced team bring together over 125 years of skill & experience in the manufacture, design and sales of elastomeric products from mouldings, gaskets and extrusions to high performance seals. We have recently invested in another new Digital Cutting machine to further increase our capabilities. Delta are highly experienced in numerous industries including engineering, marine, health, autosport, electronics, automotive, food & beverage, transportation, defence and aerospace.

Food production lines, beverage filling systems, pharmaceutical fluid transfer — they all have one thing in common. The ...
22/09/2026

Food production lines, beverage filling systems, pharmaceutical fluid transfer — they all have one thing in common. The tubing touching the product has to be the right grade. Not just "silicone." The right grade.

Food-grade and FDA-compliant silicone tubing is non-toxic, odourless, and chemically inert. It won't leach into the fluid it carries. It withstands repeated steam sterilisation without degrading. It flexes without cracking and maintains its integrity across a wide temperature range.

Standard silicone tubing won't meet those requirements. General-purpose grades exist for non-contact applications — using them in a food or medical context is a compliance risk, not a cost saving.

Delta Rubber supplies food-grade, pharma-grade, and FDA-compliant silicone tubing in a full range of bore sizes. ISO 9001 certified. If you're speccing for a regulated process, we'll confirm the correct grade before you order.

Call us on 01425 278011 for expert advice.

Offshore wind turbines operate in one of the most aggressive environments on earth. Salt water, UV, temperature cycling,...
18/09/2026

Offshore wind turbines operate in one of the most aggressive environments on earth. Salt water, UV, temperature cycling, structural vibration — and they need to last 25 years without failure. 🌊

The rubber components doing that job — sealing systems, vibration mounts, cable protection, weatherstripping — are specified in EPDM, Neoprene, and Silicone for a reason. Wrong compound choice means premature degradation. Right compound means the installation runs its full design life.

Solar farms face similar exposure. UV stability and thermal resistance aren't optional in that environment.

Delta Rubber supplies to both sectors. If you're engineering for renewables, get in touch.

Visit deltarubber.co.uk for the full range.

There's one piece of equipment on every active construction site that most people don't think about until someone trips ...
15/09/2026

There's one piece of equipment on every active construction site that most people don't think about until someone trips over a cable. 🦺

Delta Rubber stocks a full range of rubber cable protectors and ramp systems — single-channel, multi-channel, and heavy-duty versions rated for vehicle overrun. The kind used to manage power and data cables across pedestrian walkways, site roads, and event spaces.

Heavy-duty rubber construction. Non-slip surface. Simple to install, easy to relocate.

If you're managing a live site and you've got cables running across a thoroughfare, this is the correct solution.

Shop online at shop.deltarubber.co.uk

You've got a worn gasket, a battered paper template, or an old part that stopped being manufactured years ago. We can wo...
11/09/2026

You've got a worn gasket, a battered paper template, or an old part that stopped being manufactured years ago. We can work from any of them. 🔧

Our gasket digitising and scribing service turns your original — however rough — into a precise digital cutting file. We scan it, clean up the profile, and cut a new gasket to exact spec. Any material. Any thickness. Any volume.

It's how we handle the jobs where there's no drawing and no supplier left who knows the part. Send us the sample. We'll sort the rest.

Get a quote — [email protected]

Electric vehicles don't have combustion noise to mask anything. That makes vibration management a harder problem than it...
08/09/2026

Electric vehicles don't have combustion noise to mask anything. That makes vibration management a harder problem than it was. ⚡

TICO S anti-vibration pads and mounts are purpose-built for exactly this — isolating structural vibration in high-load assemblies. Motor mounts, battery tray isolation, powertrain mounting systems: the material has the load rating, the compression set resistance, and the long-term durability that EV manufacturers require.

If your engineering team is speccing vibration isolation for EV platforms, we're the people to speak to.

Call us on 01425 278011 for expert advice.

The wrong rubber adhesive doesn't just underperform — it causes premature failure. ⚠️Not all rubber compounds bond the s...
04/09/2026

The wrong rubber adhesive doesn't just underperform — it causes premature failure. ⚠️

Not all rubber compounds bond the same way. EPDM needs a specific primer before contact adhesive will take. Silicone is notoriously difficult to bond to anything without specialist silicone adhesive. Natural rubber and Neoprene respond differently to the same product.

The most common mistake is using a general-purpose contact adhesive on everything. It might hold initially. Under temperature, vibration, or movement it comes apart — and then someone wonders why the seal failed.

If you're bonding rubber in a critical application, get the adhesive right first time.

Call us on 01425 278011 for expert advice.

In healthcare and pharmaceutical manufacturing, the rubber specification isn't something you estimate. It's something yo...
01/09/2026

In healthcare and pharmaceutical manufacturing, the rubber specification isn't something you estimate. It's something you verify. 🔬

Silicone is the dominant material in this sector — biocompatible, chemically inert, cleanroom-appropriate, and available in FDA-compliant and food-grade grades. It's used in peristaltic pump tubing, seals in filling and packaging equipment, and gaskets in sterilisation systems.

The wrong compound — a Nitrile or Neoprene part in a steam sterilisation environment, for example — doesn't just degrade. It contaminates.

Delta Rubber supplies pharmaceutical-grade silicone tubing, sheet, and extrusions. ISO 9001 certified. If you're speccing for a regulated environment, we know the requirements.

Call us on 01425 278011 for expert advice.

We don't import and re-badge. We manufacture. 🇬🇧Our products are made in-house at our Christchurch, Dorset facility — by...
28/08/2026

We don't import and re-badge. We manufacture. 🇬🇧

Our products are made in-house at our Christchurch, Dorset facility — by a team with over 110 years of combined experience in rubber. That means we control quality at every step, we can produce non-standard sizes and bespoke specifications, and we're not dependent on overseas supply chains.

For procurement teams navigating supply chain disruption, that distinction matters more than it used to.

ISO 9001 certified. British manufacturing. In stock and ready to go.

Visit deltarubber.co.uk for the full range.

An O-ring is not just a size. The compound is half the specification — and getting it wrong is one of the most common re...
25/08/2026

An O-ring is not just a size. The compound is half the specification — and getting it wrong is one of the most common reasons seals fail. 🔩

Here's how the selection actually works:

Fluid compatibility first. What is the O-ring sealing? Hydraulic oil, fuel, water, steam, solvents? Each fluid attacks different compounds. Nitrile handles petroleum-based fluids. EPDM is the choice for water, steam, and brake fluid. Viton goes where chemical resistance is the priority. Silicone handles temperature extremes.

Then temperature range. Most Nitrile O-rings are rated to +120°C. EPDM takes more. Viton and Silicone operate well beyond where standard compounds fail.

Then dynamic or static. Moving seals need a compound with the right hardness and wear characteristics. Static applications have more flexibility.

If you're ordering O-rings and you're not certain on compound — call us. Getting it right first time costs less than replacing a failed seal.

Call us on 01425 278011 for expert advice.

If your seal keeps failing in a chemical environment, it probably isn't Viton. Viton doesn't fail there.FKM fluoroelasto...
07/07/2026

If your seal keeps failing in a chemical environment, it probably isn't Viton. Viton doesn't fail there.

FKM fluoroelastomer is the highest-spec material we stock. It's built for chemical processing, oil refineries, fuel systems — anywhere acids, solvents, and hydrocarbons are present at elevated temperatures. Where Nitrile or EPDM degrades in weeks, Viton keeps going.

It costs more. In the applications it's designed for, you'll spend less replacing it.

Call us on 01425 278011 for expert advice.

Address

Unit 21 Priory Industrial Park, Airspeed Road, Christchurch
Dorset
BH234HD

Opening Hours

Monday 9am - 5pm
Tuesday 9am - 5pm
Wednesday 9am - 5pm
Thursday 9am - 5pm
Friday 9am - 5pm

Website

Alerts

Be the first to know and let us send you an email when Delta Rubber Ltd posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Delta Rubber Ltd:

Shortcuts

Sponsored

Share