Qual é o horário de funcionamento?

Segunda-feira 08:00 - 18:00 Terça-feira 08:00 - 18:00 Quarta-feira 08:00 - 18:00 Quinta-feira 08:00 - 18:00 Sexta-feira 08:00 - 18:00 Sábado 08:00 - 16:00 Domingo 08:00 - 16:00

Solaris Network Solutions

Página Principal
Brasil
São Paulo, SP
Solaris Network Solutions

Como chegar Site

Informações para nos contatar, mapa e direções, formulário para nos contatar, horário de funcionamento, serviços, classificações, fotos, vídeos e anúncios de Solaris Network Solutions, Serviços de engenharia, Avenida Paulista, 171, 4o andar, São Paulo.

Somos a Solaris Network Solutions 🚀
🔧 Especialistas em auditoria, troubleshooting e certificação de redes industriais (AS-i, Ethernet/IP, PROFINET, Profibus e FOUNDATION Fieldbus).
🌐 Performance, segurança nas normas IEC, TIA e ODVA.🔒

04/09/2026

Coletar dado de rede é fácil. Entender o que ele significa é o verdadeiro desafio. 📊

Um switch médio gera milhares de números por dia. Sozinhos, eles não dizem nada — 200 retransmissões por hora pode ser normal ou pode ser o início de uma falha. Depende do "normal" de cada planta.

Nem o alerta conjunto de 5 agências dos EUA (NSA, CISA, FBI, DOE, EPA) sobre ataques a controladores Siemens escapou dessa lógica: o critério de detecção é desvio do que é normal, não uma "assinatura" fixa de ataque. 🔍

Coletar é o primeiro dia. Entender é o primeiro ano. É esse segundo trabalho que a Solaris faz. 🔧

14/08/2026

🇧🇷 Parabéns Darwin! Certificate em Applied Generative AI concluído na Johns Hopkins University. 🎓

🇺🇸 Congrats Darwin! Applied Generative AI Certificate completed at Johns Hopkins University. 🎓

09/07/2026

65% of industrial companies plan to adopt AI by the end of 2026. Less than 20% report material financial impact from what they have already invested, according to Deloitte's 2026 Manufacturing Outlook.

Rockwell's State of Smart Manufacturing 2026 shows the same gap: 90% of manufacturers call digital transformation essential, only 34% of operations are AI-augmented.

Our co-founder Darwin Anastacio Junior has audited this pattern directly: industrial AI depends on clean, structured, connected data, and most plants still lack a reliable network inventory or documented signal quality history to support it.

A digital twin cannot run well on a network nobody audited.

09/07/2026

81% of OT assessments performed in 2025 failed the most basic criterion of industrial security: segmentation between corporate network and shop floor.

The number is from the Dragos 2026 OT/ICS Year in Review, based on 100+ in-depth assessments of industrial plants worldwide.

It gets worse. 46% of the OT operations assessed have no adequate monitoring of their own environment. 73% of the incidents Dragos responded to started through VPN or a compromised jumphost.

Our co-founder Darwin Anastacio Junior has audited this same pattern across breweries, pulp and paper, chemical, and mining plants in Brazil: the plant expands, the physical report gets signed, the Ethernet backbone grows, and nobody remaps the real topology again.

A network nobody audits is not a secure network. It is a network where the failure has not been counted yet.

04/07/2026

70% of industrial network downtime starts at the physical layer: cabling, connectors, termination, shielding. It is the first to fail and the last to get audited.

The number comes from BICSI, echoed in Fluke Corporation studies. It is not new. The industry knows it and ignores it.

Our co-founder Darwin Anastacio Junior has audited hundreds of industrial networks (brewing, pulp and paper, chemical, mining, food and beverage). The pattern repeats: the plant is delivered with a cabling certification report, nobody audits it again, and when an intermittent failure appears, there is no historical data to find the root cause.

Three independent sources agree. Deloitte measures 70 to 90% less unplanned downtime with mature predictive maintenance programs. McKinsey calculates ROI between 10x and 30x in 12 to 18 months. General Motors reported 15% less downtime and USD 20 million per year in savings monitoring assembly line robots.

Auditing the network costs less than stopping the plant once.

Read Darwin's full analysis - link in the first comment.

02/07/2026

R$712,000. That is the average cost of one hour of unplanned downtime in a Brazilian industrial plant.

ABB and Sapio Research surveyed 3,215 maintenance decision-makers worldwide. Two-thirds of plants face at least one unplanned stoppage per month. The number has risen 50% since 2019.

Our co-founder Darwin Anastacio Junior has audited this pattern across more than 20 years in the field. The sector changes. The root cause does not: a poorly terminated connector, an off-spec switch, a Profibus termination wrong since commissioning. The network was signaling. Nobody read it.

Unplanned downtime is not an event. It is a symptom.

Read Darwin's full analysis - link in the first comment.

02/07/2026

$1.4 trillion. That is the annual global cost of unplanned industrial downtime, according to ABB and Sapio Research - 3,215 maintenance leaders worldwide. Up 50% since 2019.

Our co-founder Darwin Anastacio Junior published the global context today. Yesterday, the Brazilian figure: R$712,000 per hour.

The root cause is consistent across geographies and industries: OT networks that signal before failure - and facilities that don't have the diagnostic layer to read those signals.

At Solaris Network Solutions, we audit industrial networks in critical process plants - before silence becomes the answer.

Read Darwin's full analysis - link in first comment.

16/06/2026

TSN doesn't replace network audits.
It requires them.

No migration to fifth-generation industrial networks starts without a documented baseline of what's already in the plant.

Solaris has audited OT networks in process plants across Latin America for over 20 years. Every generation of industrial networks arrived the same way — and the plants without documented infrastructure were always last to benefit.

Know your network before you upgrade it.

12/06/2026

There is a new number on the LinkedIn of Darwin Anastacio Junior, founder of Solaris, that deserves to travel beyond the technical circle: over 90% of ground loops, one of the electrical problems that most disrupt industrial networks, are invisible to visual inspection.

In practice, this means a plant can have an approved report, new cables and equipment under warranty, and still stop production every week with no apparent cause.

In today's post, he explains how this diagnosis is actually done: which instrument to use, when to measure, and why protective grounding and signal grounding are different things that must never be mixed.

The takeaway for decision makers: visual inspection documents. Measurement diagnoses.

The full post is on Darwin's LinkedIn profile. Worth reading for anyone living with unexplained production stops.

10/06/2026

20 paradas por mês. Resolvidas sem trocar máquina nenhuma.

O diagnóstico correto, com instrumento na mão, custou menos que duas diárias de campo.

Aterramento como causa raiz. O padrão que mais aparece e menos é medido nas plantas de processo.

Esse é o trabalho da Solaris: medir antes de substituir.

Endereço

Avenida Paulista, 171, 4o Andar
São Paulo, SP
01311-000

Horário de Funcionamento

Segunda-feira	08:00 - 18:00
Terça-feira	08:00 - 18:00
Quarta-feira	08:00 - 18:00
Quinta-feira	08:00 - 18:00
Sexta-feira	08:00 - 18:00
Sábado	08:00 - 16:00
Domingo	08:00 - 16:00

Site

https://solarisnetworksolutions.com/

Notificações

Seja o primeiro a saber: enviaremos um e-mail para você quando Solaris Network Solutions publicar novidades e promoções. Seu endereço de e-mail não será usado para nenhum outro fim, e você pode cancelar a inscrição a qualquer momento.