TimFab

TimFab Welcome to Timfab, here we do all kinds of fabrication mainly around performance automotive scene,

There is not much that surprises me these days with jobs that come threw the door that need to be redone because of the ...
20/05/2025

There is not much that surprises me these days with jobs that come threw the door that need to be redone because of the old “I got a mate who can do it cheaper” but this one realy takes it to another level….

Out of the stable here at Timfab had the pleasure of getting lorko’s gem back together better then ever and with ideas t...
22/04/2025

Out of the stable here at Timfab had the pleasure of getting lorko’s gem back together better then ever and with ideas that we have spoken about for years…. Full factory mounted anti roll bar and shoe horned a 3.5” system over the diff with plenty of clearance while we where at it. after the last outing it came back for an inspection that turned into a lot more JOH hooking us up with a new 3” shaft and upgraded uni’s…. this thing is ready to go back out and run a number…..

Get on board guys going to be a killer event.
13/04/2025

Get on board guys going to be a killer event.

Well the old trusty Unimig that I brought back in 2009 told me that it was time to retire so off we go and bring this ba...
08/04/2025

Well the old trusty Unimig that I brought back in 2009 told me that it was time to retire so off we go and bring this bad ass unit home…. Had a good play and put it strait to work…. Very impressive piece of kit added to the stable. Here at Timfab.

Nate’s XD Barra powered ute got the 3.5” love as well and will be back in the near future for a 4” dump and a front moun...
24/03/2025

Nate’s XD Barra powered ute got the 3.5” love as well and will be back in the near future for a 4” dump and a front mount intercooler pipe work to suit the new manifold and turbo setup…

I have had the pleasure of helping Lorko build this tuff Gemini over the many years it has been in the process with many...
24/03/2025

I have had the pleasure of helping Lorko build this tuff Gemini over the many years it has been in the process with many upgrades and of recent getting a tail shaft loop, anti roll bar and full nose to tail 3.5” system. Keep an eye on this one. for a little g series motor it’s got some…..

Lorko’s GTS in for twin 3” system and since was come back for a set of headers installed and migrated into the system.
24/03/2025

Lorko’s GTS in for twin 3” system and since was come back for a set of headers installed and migrated into the system.

Photos don’t do this one justice, this catch can with built in radiator overflow mounts directly to where the battery wo...
24/03/2025

Photos don’t do this one justice, this catch can with built in radiator overflow mounts directly to where the battery would normally be under bonnet of a Torana it was a please dealing with Oli with getting the look he wanted.

Steve’s falcon in for some twin 3.5” stainless love. 🥰 followed by a tuff patrol with 3.5” system to twin 4 inch side pi...
24/03/2025

Steve’s falcon in for some twin 3.5” stainless love. 🥰 followed by a tuff patrol with 3.5” system to twin 4 inch side pipes.

Twin 3.5” 304 stainless system we completed on this mint XE falcon customer wanted to keep the original ho**er mufflers ...
24/03/2025

Twin 3.5” 304 stainless system we completed on this mint XE falcon customer wanted to keep the original ho**er mufflers that where on the old system so we made them work. 👌😁

Selwyn’s r32 come to me for intercooler piping, full Exaust with screamer and a custom power steering reservoir. 
24/03/2025

Selwyn’s r32 come to me for intercooler piping, full Exaust with screamer and a custom power steering reservoir. 

Small diesel tank we knocked up for one of our mates here at Timfab so he can run the heater for his family to keep the ...
24/03/2025

Small diesel tank we knocked up for one of our mates here at Timfab so he can run the heater for his family to keep the van warm on those cold winter night.

Address

73 Chubb Street
One Mile, NSW
4305

Opening Hours

Monday 7am - 5pm
Tuesday 7am - 5pm
Wednesday 7am - 5pm
Thursday 7am - 5pm
Friday 9am - 5pm

Website

Alerts

Be the first to know and let us send you an email when TimFab posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category