Hak fabrications

02/06/2026

A set of our 13B intake kits we had sent out recently both heading ti different destinations however both will be going onto FC engines using our adapter plate. Being only 8mm thick this makes it easy and still runs the inlet closer to the engine than a conventional FC lower intake.

If this is something you’re needing for your FC 13B setup or RE and REW port engine, send us a PM and we’ll sort you out. Shop our current range now from the link below ⬇️

https://hakfabrications.com/shop/by-manufacturer/mazda/hak-13b-intake-manifold-kit/

15/05/2026

And another one heading off to Florida to the guys at Elite Customs. Featuring all the go to parts to get a turbo ski prepped for speed.

▪️Cast 347 stainless water jacketed Up pipe
▪️Custom spec water jacketed down pipe
▪️Screamer pipe kit
▪️1 piece mandrel vent cooler pipe kit to suit the Fizzle Y1000
▪️Turbosmart Hypergate 45

Grab your PWC parts now from the link below ⬇️

https://hakfabrications.com/product-category/by-manufacturer/yamaha/

12/05/2026

2 separate kits we had head out the door with the first heading the USA and the second is heading locally to Queensland.

Both kits using our new investment cast 347 up pipes and one piece mandrel bent cooler pipe kits. Pictured is also our downpipe ( suit waterbox) and our self draining catch kit.

Shop these and other PWC products below ⬇️

https://hakfabrications.com/product-category/by-manufacturer/yamaha/

10/05/2026

09/05/2026

Batch of tanks we finished up this week heading out to local customers and a bunch to the US. One side being our Mazda Rx7 series 1/2/3 tanks and our VB-VS commodore fuel tanks. Both are an increase in capacity over factory, both bolt into the factory locations and both are capable of carrying up to 3 pumps.

These aren’t the only models we make so for these or any other vehicle tank replacements follow the link below ⬇️

https://hakfabrications.com/product-category/fuel-systems/fuel-tanks/

04/05/2026

One of 2 Yamaha PWC packages we have heading to QLD, with this showcasing just a few of the parts going into a full build. As shown this package consists of our new CAST 347 stainless up pipe which also comes standard to suit Precision style turbos and has an adapter ring to suite Garrett/HPT style turbos. Our self draining catch can kit with billet block off plate, mandrel bent one piece cooler pipe and brownandmiller hose and fitting kit.

Shop our range of Yamaha parts below to get your build started ⬇️

https://hakfabrications.com/product-category/by-manufacturer/yamaha/

02/05/2026

One of our Mazda FC series 4/5 Rx7 factory replacement fuel tanks on its way to the USA for a street/track car. Clean and easy upgrade for the standard unit without adequate baffling compared to the stock units and keeping everything internal while also giving access front the factory boot. These are capable of holding up to 3 39mm pumps and also utilise the standard fuel filler neck.

Grab yours now from the link below ⬇️

https://hakfabrications.com/shop/fuel-systems/fuel-tanks/mazda-fc-rx7-fuel-tank/

25/04/2026

‼️NEW PRODUCT‼️

Something we’ve been working on for a while now in the background amongst everything else and would surely bring some nostalgia. Our new FD Rx7 SMIC “Stock mount intercooler”. These are designed to work with the factory twin turbo system or even your street single turbo setups. No need to also purchase anything additional or remove the front end to install a front mount intercooler.

Construction consists of our custom 100mm thick core, billet end tanks, vacuum formed air duct and will come optional with a fan or without. Options with fans will need an AST relocation or delete and the standard cooler option will have the AST mounting bracket as standard. The kit will also include necessary silicone joiners and clamps to suit the standard turbo setup and necessary mounting hardware.

Although these aren’t available on the website yet they ARE AVAILABLE for purchase.

Kit prices start from $2550 without fan, $2750 with fan setup. Powder coating is an additional cost.

24/04/2026

Couple more inlet kits we had go out, with a pair of REW ports and one with the semi PP option and another inlet to one of our local customers they’d gotten all polished going into an FB build we’ll be showing more of soon.

These are on the shelf available and ready to go through the link below ⬇️

https://hakfabrications.com/shop/by-manufacturer/mazda/hak-13b-intake-manifold-kit/

17/04/2026

It’s been a long time in the making but we can finally say they are READY!!. Introducing our all new YAMAHA PWC turbo up pipes.

We’ve been working on these in the background for quite some time refining design aspects and applications and not only functionality but also aesthetics. These now feature the following:

▪️Investment cast 347 stainless steel construction
▪️2.5mm wall thickness
▪️Integrated 8AN ORB threaded ports
▪️Smooth transition from exhaust to turbo inlet
▪️Wastegate now has priority flow transition
▪️Water jacketing now around Wastegate area
▪️Comes standard to suit Precision style turbos but also come with an adapter ring as standard to suit Garrett/HPT/Turbsosmart style footprint

These are designed around the footprint as our previous up pipes meaning they will also work with our current downpipes and cooler pipe setups we already make.

These are ready to purchase NOW and will be added to the website over the weekend.