What are the opening hours?

Monday 7:30am - 4:30pm Tuesday 7:30am - 4:30pm Wednesday 7:30am - 4:30pm Thursday 7:30am - 4:30pm Friday 7:30am - 4:30pm

http://www.weldingsupply.com.au/

QWS - Welding Supply Solutions, 53 Taylor Street, Brisbane (2026)

29/05/2026

⚡ EOFY 2026 | Weldmax 180 & 185 — Exclusively at QWS

Two of the best value portable 240V machines on the market — both on EOFY exclusive deals right now. Whether you're after a no-nonsense workhorse or a step-up synergic machine, Weldmax has you covered.

WELDMAX 180 — $849 ex GST Was $1,254 | Save $405 (32% off)

1. 3-in-1 Multi-Process — MIG/MAG, MMA & TIG on 240V
Compact, lightweight, microprocessor-controlled welding inverter suitable for MIG/MAG, MMA and TIG welding processes with optimum performance in steel and stainless welding.
2. Robust Metal 2-Roll Wire Feed Drive System
Heavy-duty metal drive — built tougher than anything at this price point.
3. Aussie-Ready Out of the Box
Standard AU-style connections, Gas/Gasless polarity reversal built in — unbox it and weld.

WELDMAX 185 DIGITAL — $949 ex GST Was $1,456 | Save $507 (35% off)

1. Synergic MIG Mode — Smarter Welding on 240V
MIG synergic, MIG standard, MMA and TIG processes — synergic mode automatically sets optimal parameters, reducing setup time and delivering consistent results every time.
2. Pre-Loaded Welding Programs — Mild Steel & Stainless
Pre-loaded welding programs for mild steel and stainless steel for wires up to 1.0mm — dial in your material and the machine does the rest. YouTube
3. Compact Microprocessor-Controlled Inverter with 2-Roll Wire Feed
Compact, lightweight design with integrated 2-roll wire feed — portable enough for site, capable enough for the workshop.

Not sure which one is right for you?

Go the 180 if you need a tough, reliable portable multi-process machine at an unbeatable price. Step up to the 185 if you want digital synergic capability and pre-loaded welding programs for faster, more consistent results.

📅 Both promotions end 30 June 2026 or while stocks last. All prices ex GST.
📞 Contact the QWS team to lock in your deal or book a free onsite demonstration.
👉 https://ap1.hubs.ly/y0WT6q0

28/05/2026

EOFY 2026 — Weldmax 500i Inverter MIG | Exclusively at QWS

The flagship of the Weldmax range. When production volume and sustained performance are non-negotiable, the 500i delivers.

Here's why:

1. 5–500A Industrial Output — 60% Duty Cycle at 500A, 100% at 390A
The 500i features a separate wire feeder suitable for MIG/MAG manual, synergic, pulsed, double-pulsed and root welding, TIG-DC continuous and pulsed, and MMA welding.
2. Separate Heavy-Duty Wire Feeder with 4x4 Geared Drive
Portable separate wire feeder with heavy-duty wire drive system and 4x4 geared drive and pressure rollers for consistent, reliable wire feed under maximum sustained load. Overtemp protection, thermostatic fan cooling, reverse polarity for gas or gasless wire welding and Euro torch connection.
3. Large 85mm Full Digital Display with Microprocessor Arc Control -
The large 85mm display shows all welding parameters, making setup easy and intuitive. In synergic and pulsed MIG/MAG modes, the microprocessor ensures easy and quick setting of programs guaranteeing optimal arc stability.
4. Field-Upgradeable — Pulse, Double Pulse, Root & CC/CV
Standard unit ships Single Pulse ready with software upgrade options available at any time:

- Pulse welding for improved control and reduced spatter
- Double Pulse welding for ultimate precision and weld bead appearance
- Root welding for seamless root pass welding
- Comprehensive Single Pulse, Double Pulse & Root combined upgrade
- CC/CV mode for using voltage sensing wire feeders on site

All machines come with a 3-year warranty as standard — serious machine, serious backing.

💰 EOFY Package — From $9,679 ex GST
Gas Cooled | Single Pulse | Ready to Weld — 3 to 4 metre standard package
✅ Includes: Earth lead | Regulator | Plug | Delivery | Operator Training
🔁 Also available on EOFY promotion — enquire with QWS:

- Water Cooled Package
- Push-Pull Package
- Single or Double Pulse with Trolley Package

📅 Promotion ends 30 June 2026 or while stocks last. All prices ex GST.
📞 Contact the QWS team to lock in your deal or book a free onsite demonstration.
👉 https://ap1.hubs.ly/y0WKmm0

26/05/2026

EOFY 2026 — Weldmax 380i Inverter MIG | Exclusively at QWS ⚡
The step-up machine for serious fabricators is now part of our EOFY exclusive Weldmax promotion. Here's what sets the 380i apart:

1. 5–360A, 4-Process Capability with Separate Portable Wire Feeder
Wide 5–360 amp welding range covering Synergic MIG/MAG, Stick/Arc/MMA, Gouging and TIG/GTAW Lift-Arc processes. Unlike integrated units, the 380i features a portable separate wire feeder with a heavy-duty wire drive system.

2. Heavy-Duty 4x4 Geared Drive with Full MIG Parameter Control
4x4 geared drive and pressure rollers deliver reliable, consistent wire feeding under sustained load. Full MIG/MAG parameter control includes trigger latch, switch and spot control, reverse polarity for gas or gasless wire welding, thermostatic fan cooling and overtemp protection.

3. Field-Upgradeable Software — Pulse, Double Pulse, Root & CC/CV
Standard unit ships Synergic-ready with upgrade options available at any time:
Pulse welding for improved control and reduced spatter, Double Pulse for ultimate precision and weld bead appearance, Root welding for seamless root pass welding, a comprehensive Single Pulse/Double Pulse/Root combined upgrade, and CC/CV mode for using voltage sensing wire feeders on site.

4. Ready to Weld — 415V 3-Phase, Complete Package
Comes complete with 4-metre earth lead, 4-metre torch and gas regulator and hose. Runs on 415V 3-phase power with Euro torch connection for compatibility with a wide range of torches and superior inverter processor control for enhanced arc stability.

💰 EOFY Package — From $7,579 ex GST
Gas Cooled | Synergic | Ready to Weld — 3 to 4 metre standard package
✅ Includes: Earth lead | Regulator | Plug | Delivery | Operator Training
🔁 Also available on EOFY promotion — enquire with QWS:

- Water Cooled Package
- Push-Pull Package
- Single or Double Pulse with Trolley Package

- Promotion ends 30 June 2026 or while stocks last. All prices ex GST.
- Capital equipment purchases may be eligible for the instant asset write-off — speak to your accountant.
- Contact the QWS team to lock in your deal or book a free onsite demonstration or click on the link to view all Weldmax machines currently on promotion: https://ap1.hubs.ly/y0Wsdc0

25/05/2026

EOFY 2026 — Weldmax 355i Compact Multi-Process MIG Inverter | Exclusively at QWS ⚡

This EOFY we're offering an exclusive deal on one of the most capable compact inverters on the market.

Here's why the 355i stands out:

1. Italian-Built, 5–350A Multi-Process Powerhouse
Manufactured in Italy and exported worldwide, the 355i handles Synergic MIG/MAG, Stick/MMA and TIG/GTAW Lift-Arc welding across a 5–350A range, with a duty cycle of 50% at 350A and 100% at 280A — built for sustained production work, not just occasional use.
2. Advanced MIG/MAG Feature Set
Full MIG/MAG parameter control including pre-set synergic curves, custom program storage, 2T/4T spot function, pre/post gas time regulation, electronic reactance, soft start, burn-back time, hot start, slope down and crater fill. Welding programs cover mild steel, stainless steel, aluminium and bronze wires up to 1.6mm.
3. Upgradeable On the Spot — Post Sale
Standard machine ships Synergic-ready, but Pulse, Double Pulse, Root, or combined Pulse/Double Pulse/Root PCB upgrades can be installed at any time — including post sale. Each upgrade PCB can be safely added in under 1 minute by non-technical personnel — grow the machine as your business grows.
4. Robust 4x4 Geared Drive & Compact Design
Portable compact design with an internal wire drive system and 4x4 geared drive & pressure rollers ensure consistent, reliable wire feed under load. Standard Australian-style welding cable connections and built-in Gas/Gasless polarity reversal mean it's genuinely workshop-ready out of the box.

💰 EOFY Package — From $6,119 ex GST
Gas Cooled | Single Pulse | Ready to Weld — 3 to 4 metre standard package
✅ Includes: Earth lead | Regulator | Plug | Delivery | Operator Training

Also available on EOFY promotion — enquire with QWS:

- Water Cooled Package
- Push-Pull Package
- Double Pulse with Trolley Package

- Promotion ends 30 June 2026 or while stocks last. All prices ex GST.
- Capital equipment purchases may be eligible for the instant asset write-off — speak to your accountant.

📞 Contact the QWS team to lock in your deal or book a free onsite demonstration.
👉 https://ap1.hubs.ly/y0W3m80

21/05/2026

End of Financial Year is here — and so is a reason to upgrade your setup.

Check out this stainless fl**ge weld, laid down using the Weldmax 225 Double Pulse MIG/TIG/MMA Inverter — and tell us that finish doesn't speak for itself. 👌

The double pulse function is a game changer for stainless and aluminium. It gives you that controlled heat input, tight bead profile, and a result that looks like it came off a TIG — through a MIG gun. Less time grinding. Less rework. More quality, faster.

Why upgrade before June 30?

✅ Claim your tax deduction this financial year
✅ Start FY26 with equipment that actually performs
✅ Instant asset write-off may apply — talk to your accountant

Weldmax 225DP — what's in the box:

⚡ MIG Double Pulse / Single Pulse / Synergic / Manual modes
⚡ TIG DC Standard & Pulsed — steel & stainless
⚡ MMA/Stick with VRD
⚡ 4-wheel drive wire feeder
⚡ Digital display with job/memory mode
⚡ Full setup included — torch, earth lead, regulator, rollers
⚡ 3-year warranty + lifetime product support
⚡ Runs on standard 240V / 15A

⚠️ Limited stock available — these move fast at EOFY. Don't miss out.
👉 Link in bio or head to https://ap1.hubs.ly/y0Tms90
📞 Call us on (07) 3399 6199

18/05/2026

WHAT DOES THE INSTANT ASSET WRITE-OFF ACTUALLY MEAN FOR YOUR FABRICATION BUSINESS?

If you've been hearing about the EOFY instant asset write-off but aren't 100% sure what it means for you — here's the short version.

Instead of claiming a little bit of depreciation on a new piece of equipment each year, the instant asset write-off lets eligible businesses deduct the full purchase price in the financial year the asset is first used or installed.

So if you buy a new welder, press brake, or other fabrication equipment before 30 June 2026 — and your business is eligible — you could write off the entire cost against your taxable income this year.

For a lot of fabricators, that's the difference between "maybe next year" and pulling the trigger now.

What kind of equipment qualifies?
- Industrial welders & MIG packages
- Plasma & oxy cutting equipment
- Welding positioners & rotators
- Material handling & workshop gear

Always check with your accountant on turnover thresholds and eligibility — but if the numbers stack up, EOFY is the time to act.

The QWS team is here to help you find the right gear for your workshop and your budget.

💬 Message us or call us today.
🔗 Browse our full range: https://ap1.hubs.ly/y0SKXX0

15/05/2026

⚡ EOFY TAX WRITE-OFF — don't let this one slip past.

If you're running a fabrication shop, workshop or heavy industry operation, now is the time to replace that ageing welder with something that actually keeps up.

The Lincoln Electric Powertec i500S 500A Water-Cooled Package is available now through QWS — and under the instant asset write-off, it could be fully deductible this financial year.

✅ 500A output
✅ Water-cooled for long, continuous runs
✅ Synergic MIG for consistent results
✅ MIG, flux-cored & MMA ready
✅ Built for mining, structural, transport & heavy fab

Upgrade before 30 June and start next financial year with the gear your team deserves.

🔗 https://ap1.hubs.ly/y0S8Tm0

Drop us a message or call the team if you want to talk through the package. We're here to help you make the most of EOFY.

14/05/2026

EOFY is coming. Is your workshop ready? 📋

June 30 is the cut-off — and if upgrading your equipment has been on the list,
now is the time to act.

From TIG machines to fume extraction, the right investment before June 30
could make a real difference to your bottom line.

Speak to your accountant about what's eligible.
Then get in touch with the QWS team — we'll help you find the right gear.

📞 07 3399 6199
📧 [email protected]

12/05/2026

Exploring the Future of Manufacturing at Australian Manufacturing Week 2026

The QWS team is excited to be attending Australian Manufacturing Week 2026 - where industry leaders, innovators, and manufacturers come together to showcase the latest advancements shaping the future of Australian fabrication and manufacturing.

This year’s exhibition has already highlighted some incredible developments across:

- Welding technology
- Fume extraction & air quality systems
- Laser welding & laser cleaning technology
- Automation & robotic welding solutions
- Workshop productivity & safety innovations

At QWS, we are always looking for ways to bring the latest technology, best practices, and smarter fabrication solutions to our customers — and AMW continues to be one of the best places to see where the industry is heading.

It’s also been fantastic catching up with some of our valued industry partners and suppliers including Kemppi, Harris Gas, Weldclass, Lincoln Electric and Abicor Binzel, along with many other businesses helping drive innovation across the fabrication sector.

From smarter welding systems through to advanced fume control and robotic automation, there is a strong industry focus on improving:

• Productivity
• Operator safety
• Efficiency
• Weld quality
• Workshop sustainability

We’ll be sharing more of the exciting technology, equipment, and innovations we discover throughout the week — so stay tuned.

The future of fabrication is evolving quickly, and QWS is proud to continue bringing these advancements to Australian workshops and manufacturers.

11/05/2026

Precision TIG Performance. Built for Serious Fabrication!

The Lincoln Electric Aspect 200 AC/DC TIG Welder is engineered for fabricators and welders who demand precision arc control, exceptional aluminium performance, and advanced AC/DC TIG capability in a compact, workshop-ready platform.

Designed for high-end TIG applications, the Aspect 200 delivers excellent HF ignition, stable arc performance down to low amperages, and advanced waveform control — making it ideal for aluminium, stainless, and precision fabrication work.

Why Fabricators Rate the Aspect 200

- Advanced AC/DC TIG Functions
Multiple wave shapes, pulse TIG, adjustable balance and offset provide greater control over pe*******on, arc focus, and heat input.

- Exceptional Aluminium Welding Performance
Purpose-built AC controls deliver smooth starts, excellent puddle control, and stable arc characteristics on aluminium applications.

- 200A Output on Single-Phase Power
Powerful performance in a compact package — ideal for workshops and mobile fabrication environments.

- Advanced Torch Control Technology
Adjust settings directly from the torch for improved workflow efficiency and operator control.

- Built Lincoln Tough
Designed to handle demanding industrial environments with the reliability professionals expect from Lincoln Electric.

EOFY Is the Perfect Time to Upgrade

As the end of the financial year approaches, now is the ideal time to invest in equipment that improves:

✔ Productivity
✔ Weld quality
✔ Workshop capability
✔ Operational efficiency

Upgrading equipment isn’t just an expense — it’s an investment in the long-term performance and growth of your business. Modern welding technology helps reduce downtime, improve workflow efficiency, and deliver better results across every job.

If your workshop is considering capital investment before EOFY, the Aspect 200 is a serious upgrade for businesses focused on quality and precision fabrication.

Talk to the QWS team about upgrading your welding equipment before EOFY and investing in technology that works as hard as your team does.

📞 07 3399 6199
📧 [email protected]

07/05/2026

TIG Brush vs Pickling Paste – What’s the Better Option?

When it comes to cleaning stainless steel welds, the industry has traditionally relied on pickling paste — but modern fabrication is shifting toward safer, faster solutions like the Ensitech TIG Brush system.

Side-by-Side Comparison

TIG Brush (Electrochemical Cleaning)

✔ Removes heat tint and restores corrosion resistance in one step
✔ No hazardous acids or chemical burn risk
✔ Fast, targeted cleaning with minimal downtime
✔ Immediate neutralisation – no rinsing delays
✔ Cleaner, more consistent finish
✔ Safer for operators and easier to comply with WHS requirements

Pickling Paste (Acid-Based Cleaning)

✖ Contains hazardous acids (HF/Nitric) – serious safety risk
✖ Requires PPE, controlled handling and disposal
✖ Slower process – apply, dwell, rinse, neutralise
✖ Risk of over-etching or inconsistent finish
✖ Environmental and compliance challenges

🧠 The Bottom Line

If your workshop is still using pickling paste, you’re trading productivity and safety for an outdated process.

DON'T FORGET YOU CAN CLAIM UP TO $550 CASH BACK ON TIG BRUSH MACHINES! 🔥

Purchase an eligible TIG Brush machine between 1 May – 30 June 2026 and receive a manufacturer rebate via Visa Prepaid Gift Card:

▪ TBX-330 → $150 cashback
▪ TBX-440 → $250 cashback
▪ TBX-550 → $350 cashback
▪ TBX-700 → $550 cashback

How to Claim:

✔ Purchase an eligible TIG Brush machine during the promo period
✔ Register your machine warranty
✔ Upload proof of purchase
✔ Receive your iChoose Visa Prepaid Gift Card once approved

🗓 Claims close 31 July 2026

Now’s the perfect time to upgrade your stainless weld cleaning setup and get rewarded at the same time.

📩 Contact the team at QWS to find the right TIG Brush system for your workshop.

QWS - Welding Supply Solutions

29/05/2026

28/05/2026

26/05/2026

25/05/2026

21/05/2026

18/05/2026

15/05/2026

14/05/2026

12/05/2026

11/05/2026

07/05/2026

Address

Opening Hours

Telephone

Website

Alerts

Contact The Business

Shortcuts

Featured

Share

Monday	7:30am - 4:30pm
Tuesday	7:30am - 4:30pm
Wednesday	7:30am - 4:30pm
Thursday	7:30am - 4:30pm
Friday	7:30am - 4:30pm