i Off-road

20/05/2026

Front Coilover install on a GQ TD with a top mount intercooler, the tower brace became extremely tight but made it go there in the end. 4 inch bump cans weren't available at the time so the shorty's went in. took the time to make sure the bump stop strikes at 90 degrees to the mount.

14/05/2026

GQ Roll Cage Tacked together for Adam's TB42turbo rig

https://i-off-road.myshopify.com/products/roll-cages?variant=48457117106393

21/03/2026

Tube Switch Pro Mount with 30 degrees of adjustment

Available!

17/03/2026

Trick little GPS and gear Display Mount, hose clamped to the steering column for simplicity and weight

The Middy has all sorts of things going on

13/03/2026

One could say it’s a shell of itself 🐛

05/03/2026

17/10/2024

TB42 Haltech wired in!

New harness wired including coil packs, sensors and even sneaky 2step wired in! Any guess where the 2step is switched from?

has a few things to tidy up before it’s goes the to dyno to join the 300hp club 🦾

02/10/2024

Good friend wanted to add some flare to the TB whilst prepping for the new to go in and join the 300hp club 🤝

Wanted something a little funky with the TB logo and a coil pack mount

15/09/2024

Joel’s rig in for some new rear stays and CCDA sign off as the team is off to

05/09/2024

Pushing!!!
A Girl, a fella, together they’re upgrading old Yella! 🚌

Our friends at moved the front diff housing forward a good amount, We provided a new panhard/ steering box mount, wanting a flatter panhard this mount moved it all roughly 80mm forward and 50mm lower then standard. Picking up the original bolt holes to make installation as easy as possible. Keyed the outter brace through the mount and the nut/bolt keyed also.

Even in its class 8 state, Dicksy still managed to mount a ground anchor, I think he went overkill on the colour not the size of the bucket! 🦾