Robbie Deyzel CNC

Robbie Deyzel CNC Robbie Deyzel CNC (PTY) Ltd is a division of Robbie Deyzel Engineering cc. We take pride in what we do and aim to serve you with Engineering Solutions.

We are a "people company that provides engineering excellence".

Today we are not only celebrating what we achieved during the week, we are also celebrating what is happening today.And ...
23/05/2026

Today we are not only celebrating what we achieved during the week, we are also celebrating what is happening today.
And today we celebrate someone who helped make weeks like this possible.
Happy Birthday Kenny!
Kenny has been with us from day one. When Robbie Deyzel CNC was just a vision being built into something real, Kenny was already there with his hands and his heart in it. He has helped build this company from the ground up and everything we are proud of today, he is part of that story.
On the floor he is respected. Among his colleagues he is valued. And to this team he is family.
Kenny, today is yours. Enjoy every moment of it with the people who matter most to you.
Halala Kenny, uyindoda enyamileyo! 🇿🇦
From the whole RD CNC family, lekker birthday!

23/05/2026

This week on the floor we did something worth talking about.
We set up a custom tombstone on our 4th axis and loaded 3 components in a single setup.
The material is VRN 400, sourced from Macsteel. It arrives from the supplier already sitting at 40+ HRC, around 400 Brinell hardness. It is built to resist wear, impact and abrasion. You find it on earthmoving equipment, mining chutes and heavy industrial wear plates. It is designed to outlast everything around it.
Now here is one number from just the roughing pass alone.
One single roughing tool covered 305.7 metres of feed distance through that material. That is roughly three and a half rugby fields end to end, carved through hardened wear steel, by one tool, in one operation.
And that is the roughing pass only. The full program numbers are still to come.
Next week we drop the complete picture. Feeds, speeds, every tool, every operation.
Watch this space.
www.rdcnc.co.za

Every part that leaves RD CNC has been measured twice.First at the machine by the machinist -- in-process, before it eve...
20/05/2026

Every part that leaves RD CNC has been measured twice.
First at the machine by the machinist -- in-process, before it ever comes off the fixture. Then independently by our QC inspector on the Trimos V7-400, a Swiss precision instrument measuring down to 0.0001mm.
In plain language: that is finer than a fraction of a human hair.

Every result is documented. Pass, Marginal or Fail. Anything that fails gets a formal non-conformance raised in JobBoss 17.3 -- investigated, resolved, recorded permanently.
When your part arrives from us, it has been verified, signed off and documented. No surprises. No excuses.
041 007 0742 | [email protected] | rdcnc.co.za

🎂 Someone at Robbie Deyzel CNC is getting older today and we don't let that slide.Cold morning, early start, but before ...
15/05/2026

🎂 Someone at Robbie Deyzel CNC is getting older today and we don't let that slide.
Cold morning, early start, but before the machines warmed up, we warmed up something more important.
And here's the thing about Brandon. Most people show up on their birthday expecting something. Brandon showed up with donuts for the whole team.
Just over a year in and already crept into everyone's heart. That's character. Lekker birthday Brandon! 🍩🔴⚙️

Most machine shops check your part at the end. We check it while it is still on the machine. What you see in this photo ...
13/05/2026

Most machine shops check your part at the end. We check it while it is still on the machine. What you see in this photo is a precision vice clamped directly to our 4th axis rotary unit. The Haimer 3D sensor verifies dimensions at each rotary position before the machine moves to the next face.

In plain language: the part does not move, does not get re-clamped, and gets checked at every stage -- all in a single operation.

For our clients that means complex multi-face components machined faster, more accurately and with less opportunity for error. Every job then gets a final independent inspection on our Trimos V7-400 before anything ships.

That is the RD CNC standard.
041 007 0742 | [email protected] | rdcnc.co.za

🎂 Happy Birthday, Pieter! Strong winds outside and Gqeberha doing her thing, but inside? Warm, loud, and it smells like ...
07/05/2026

🎂 Happy Birthday, Pieter!

Strong winds outside and Gqeberha doing her thing, but inside? Warm, loud, and it smells like biltong. 😄

Billy handed Pieter his birthday pack today and the whole RD CNC crew is cheering you on. Valued. Appreciated. Glad to have you. Lekker birthday! 🔴⚙️

Ever wondered what actually happens between the moment you place an order and the moment it arrives at your door?Nothing...
06/05/2026

Ever wondered what actually happens between the moment you place an order and the moment it arrives at your door?

Nothing is left to chance at RD CNC. Every job tracked, costed, quality-checked and documented from quote to shipment -- powered by JobBoss 17.3 ERP.

In other words: No surprises. No excuses.

041 007 0742 | [email protected] | rdcnc.co.za

01/05/2026

⚙️ A People Company That Provides Engineering Excellence.

This weekend, the Simola Hillclimb takes centre stage as one of South Africa's most prestigious and demanding motorsport events. We're proud to play a role in it

The Simola Hillclimb is one of South Africa's most celebrated motorsport events. This year, we had the privilege of manufacturing these Rear Upright Adapters, for our clients taking on the iconic climb.

But here's what makes this one personal for us. It's not just a component. It's a team that showed up, measured twice, cut once, and refused to let anything leave this floor that wasn't exactly right. Because when your client is running flat out up a Hillclimb, there's no room for almost good enough.

🎬 Sneak peek at what went into these parts, machined right here in Gqeberha from Aluminium 7075. Every cut. Every pass. Every inspection. Done with pride.

Michael, we know how many early mornings and late nights went into getting to this start line. The team at RDCNC is behind you all the way. Run hard, stay safe, and go make it count. 🤙

Project done by - Kevin, T.K

🇿🇦 Proudly South African
⚙️ Built on Precision
👥 Powered by People

🚀 IT'S LIVE — www.rdcnc.co.za Our new website is officially live and we couldn't be more proud of what it represents. Th...
28/04/2026

🚀 IT'S LIVE — www.rdcnc.co.za

Our new website is officially live and we couldn't be more proud of what it represents.

This isn't just a website. It's a showcase of our people, our precision, and the culture we've spent years building at Robbie Deyzel CNC.

When you visit, you'll see:
✅ Who we are - a people company that provides engineering excellence
✅ What we do - precision CNC machining, built for complexity and scale
✅ How we work - powered by JobBoss 17.3 ERP, with in-spec, on-time delivery as standard

We built this for our clients, our partners, and most importantly, our team. The people who show up every day and make the work matter.

Go check it out 👇
🌐 www.rdcnc.co.za
📍 31 Kurland Road, Perseverance, Gqeberha
📞 +27 (0)41 007 0742
📧 [email protected]

The best engineering solutions don't just solve the immediate problem - they redesign the problem itself. We recently co...
18/04/2026

The best engineering solutions don't just solve the immediate problem - they redesign the problem itself.

We recently completed a custom press tool set for a multinational automotive client. The original design had a fundamental cost problem: every time the high-wear working surfaces degraded, the entire tool had to be remade.

We redesigned the concept.

Our solution delivers a fully machined press tool where the high-wear inserts are designed to be removed and replaced independently, without touching the rest of the tool structure. Same precision. Fraction of the replacement cost. Significantly less downtime.

That's the difference between a supplier and an engineering partner.

Here's what the manufacturing demanded:

Material: K340 tool steel - triple hardened and tempered to 60–62 HRC, combining edge retention with impact toughness at extreme hardness.

Process sequence:
→ Rough machine to stock
→ Harden & Temper ×3 to 60–62 HRC
→ Final Grind (flatness and datum reference)
→ Final hard machining of all critical features

Critical features held:
* Profile: 47.60 +0.05/+0.02mm
* Precision bore: Ø6.00 H7 × 20mm depth
* Overall length: 290mm
* Tolerances to ±0.02mm on critical features

Verified on our Trimos V7-400 height gauge before release.

The people who made this happen : T.K, Boetie, and Sherwin — brought exactly the level of craft and accountability this kind of work demands.

If your tooling costs are driven by full replacements that don't need to be, let's talk about what a redesigned solution could look like.

📩 [email protected]
🌐 www.rdcnc.co.za
📞 +27 41 007 0742





Address

31 Kurland Road Perseverance
Port Elizabeth
6001

Opening Hours

Monday 07:30 - 16:15
Tuesday 07:30 - 16:15
Wednesday 07:30 - 16:15
Thursday 07:30 - 16:15
Friday 07:00 - 14:00

Telephone

27410070742

Website

Alerts

Be the first to know and let us send you an email when Robbie Deyzel CNC posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category