Facet Engineering Pty Ltd

02/06/2026

When it comes to facility upgrades, there is no room for guesswork. At Facet Engineering, we build in our Krugersdorp workshop with one goal: durability. From jigging to the final bead, we ensure your equipment is ready for the pressures of the harvest. If you have a project coming up, message us on 083 267 2281.

27/05/2026

Don't guess the layout
When you are adding a new conveyor line or expanding your intake capacity, there is no room for "trial and error" on the warehouse floor.

At Facet Engineering, we don't build until we’ve mapped it out in 3D. By simulating the layout in our design phase, we can make sure the chutes, the drives, and the transfer points all line up exactly as they should.

It keeps the installation time short and prevents the costly site modifications that happen when the layout is "guessed" rather than engineered. We build these systems in our own Krugersdorp facility, so when they arrive on-site, they are ready to go.

If you have a project coming up and want to make sure it’s planned correctly, send me a message on 083 267 2281. Let’s get the design right from the start.

21/05/2026

When you need a sealed system
Belt conveyors have their place, but when you are dealing with fine product, dust, or an environment where spillage is a headache, you need something better.

Our custom screw conveyors are built to move product without the mess. Because the system is enclosed, you keep the dust inside the pipe and off your warehouse floor. We manufacture these right here in Krugersdorp, ensuring the build quality can handle the heavy-duty demands of a 24/7 harvest season.

If you are tired of cleaning up around your intake line, a screw conveyor might be the upgrade you need. Give us a shout on 083 267 2281 or send us a video of where you’re having the most spillage. We’ll look at it and give you a quote for a unit that’s actually built for the job.

19/05/2026

Production delays rarely come from one major failure.

In many facilities, the real issue is gradual inefficiency:
• Material bottlenecks
• Product damage during handling
• Poor system flow
• Maintenance access problems
• Equipment strain over time

These issues build up quietly until they start affecting output and operating costs.

At Facet Engineering, conveyor and process systems are designed around how operations actually run day to day. The focus stays on reliability, efficiency, and practical long-term performance.

Good engineering keeps production moving with fewer interruptions.

14/05/2026

Most conveyor damage starts with something small.

A bolt.
A piece of wire.
A magnetic soil clod hidden inside the product stream.

Once it reaches downstream equipment, the damage starts quickly.

The Facet Engineering 5XCX-5 Magnetic Separator is built to remove ferrous contamination before it becomes a maintenance problem.

Built for:
• High-volume intake conditions
• Continuous plant operation
• Conveyor and equipment protection
• Cleaner final product

Specifications:
• 17,000 gauss magnetic intensity
• 5000kg/h throughput
• Stainless Steel 304 construction

Designed for real operating conditions during peak harvest periods.

Need help assessing your intake setup?

Send a video of your plant or intake area to:
📱 +27 83 267 2281

Our engineers will review the flow and recommend a suitable solution.

12/05/2026

Most conveyor problems are already built into the plant before installation starts.

Not because the equipment is wrong.
Because the system was never properly planned around the space, flow, and operating conditions.

Clearances get missed.
Transfer points become difficult to access.
Maintenance areas are too tight once the plant is running.

These problems usually only show up once product starts moving.

At Facet Engineering, systems are designed digitally before manufacturing begins.

Layouts are checked in 3D.
Flow paths are reviewed.
Equipment positions are planned around how the plant will actually operate.

The result is not just an installation that fits.

It is a system designed to run properly under load.

For 37 years, we have designed, manufactured, and installed conveying systems for real operating conditions across Southern Africa.

Design. Manufacture. Install.

05/05/2026

05/05/2026

37 years of keeping the post-harvest community moving.

When the harvest reaches its peak, you need more than just a machine, you need a system that was designed for your specific challenges. Since 1989, Facet Engineering has specialized in the design, manufacture, and installation of industrial conveyor systems.

We take pride in being a local manufacturer with a 2000m² state-of-the-art facility. This allows us to maintain strict quality control and provide the rapid support that imported systems simply cannot match.

Need a solution fast?
Use our WhatsApp Video-to-Quote service.

Record the area or system that needs an upgrade.

WhatsApp it to +27 83 267 2281.

Receive a professional assessment and quote from our engineering team.

Trust the expertise that has supported South African agriculture for nearly four decades. Let’s optimize your flow today.