Fluid Power Group

Fluid Power Group Actuators | Diaphragm Valves | Drifters | Hydraulics | Knife Gate Valves | Pinch Valves | Pneumatics

Most valve suppliers give you one option and tell you to make it work. We give you three.FPVT Knife Gate Valves come in ...
01/06/2026

Most valve suppliers give you one option and tell you to make it work. We give you three.

FPVT Knife Gate Valves come in three purpose-built configurations — because no two slurry applications are the same:
• FGV Flanged — double-seat design for heavy-duty isolation.
• SGV Polyline — one-piece wafer body with Polyline-Urethane lining for zero build-up.
• WGV Wafer — compact design for tight installations with bi-directional sealing.

All three types are manufactured in South Africa, available from DN 50 mm to DN 750 mm, and compatible with every actuation method.

Which type fits your application? Let's find out.

Request A Quote:
📞 +27 11 452 5668
📩 [email protected]
🌐 www.fluidpower.co.za

When is an air motor the smarter choice over electric?When you need intrinsic safety in hazardous areas. When your motor...
28/05/2026

When is an air motor the smarter choice over electric?

When you need intrinsic safety in hazardous areas. When your motor might stall under load. When you need washdown capability. When space is tight.

FPP Vane Air Motors deliver power without the risks of electrical components — and they're simpler to control, maintain, and install.

Request A Quote:
📞 +27 11 452 8795
📩 [email protected]
🌐 www.fluidpower.co.za

The biggest enemy of a Knife Gate Valve isn't wear. It's build-up.Slurry collects in cavities. Bonnets clog. Blades jam....
25/05/2026

The biggest enemy of a Knife Gate Valve isn't wear. It's build-up.

Slurry collects in cavities. Bonnets clog. Blades jam. And then your maintenance team is pulling a valve off the line — again.

The SGV Polyline Knife Gate Valve eliminates this problem by design:
• One-piece wafer body — no cavities for slurry to collect.
• Smooth Polyline-Urethane lining — no build-up, no blockages.
• Built-in deflector cone — prevents solids from packing behind the blade.
• No gland to maintain.

The result? A valve that stays operational longer between services.

DN 50 mm – 750 mm | Up to 10 bar | Optional V-Notch for flow control | ISO 9001:2015 certified

Request A Quote:
📞 +27 11 452 5668
📩 [email protected]
🌐 www.fluidpower.co.za

Hydraulic pump failed? Need a custom power pack? Hoses need replacing on-site?Fluid Power Group has been delivering Comp...
22/05/2026

Hydraulic pump failed? Need a custom power pack? Hoses need replacing on-site?

Fluid Power Group has been delivering Complete Hydraulic Solutions since 1994 — from design and manufacture through to repair, testing, and on-site service.

Our 110kW open/closed loop testing facility ensures every repaired component meets O.E.M. specifications, accompanied by an electronically generated test certificate.

Great service, every time.

Request A Quote:
📞 +27 11 452 8795
📩 [email protected]
🌐 www.fluidpower.co.za

Need an air motor? We've got the range.FPP Vane Air Motors span from 0.45 HP right up to 9.5 HP across lubricated, oil-l...
21/05/2026

Need an air motor? We've got the range.

FPP Vane Air Motors span from 0.45 HP right up to 9.5 HP across lubricated, oil-less, and stainless steel configurations — with speeds from 300 to 10,000 RPM.

Whether it's a small mixing application or a heavy-duty industrial drive, we'll spec the right motor for your setup.

Request A Quote:
📞 +27 11 452 8795
📩 [email protected]
🌐 www.fluidpower.co.za

Not all actuator barrels are created equal.FPA Actuators use fiberglass-reinforced tubing instead of traditional metal c...
19/05/2026

Not all actuator barrels are created equal.

FPA Actuators use fiberglass-reinforced tubing instead of traditional metal cylinders. The result? A lighter actuator that resists corrosion, handles full operating pressure, and lasts longer - especially in water treatment, chemical processing, and outdoor installations.

Combined with our 316 stainless steel shaft and self-lubricating seal design, its engineering is focused on longevity, not just functionality.

Request A Quote:
📞 +27 11 452 5668
📩 [email protected]
🌐 www.fluidpower.co.za

30+ years. One mission: Complete Hydraulic Solutions.Since 1994, Fluid Power Group has been the trusted name for hydraul...
15/05/2026

30+ years. One mission: Complete Hydraulic Solutions.

Since 1994, Fluid Power Group has been the trusted name for hydraulic equipment supply, repair, testing, and on-site service across South African industry.

From custom Power Packs to emergency hose repairs — we've got the expertise, the facility, and the stock to keep your operation running.

We've Got the Power!

Request A Quote:
📞 +27 11 452 8795
📩 [email protected]
🌐 www.fluidpower.co.za

Spring-Return or Double-Acting - which actuator is right for your application?For valve sizes up to DN 200 mm, our Sprin...
12/05/2026

Spring-Return or Double-Acting - which actuator is right for your application?

For valve sizes up to DN 200 mm, our Spring-Return Actuators automatically move to a safe position when air supply is lost - essential for emergency shutdown and critical process isolation.

For DN 250 mm and above, we use Double-Acting Pneumatic Actuators paired with an Air Failsafe Reservoir, delivering higher torque while still maintaining fail-safe capability.

Both configurations are manufactured in South Africa in sizes DN 50 – 750 mm.

Not sure which one you need? Let's talk.

📞 +27 11 452 5668
📩 [email protected]
🌐 www.fluidpower.co.za

Address

26 Central Avenue, Eastleigh
Edenvale
1609

Opening Hours

Monday 08:00 - 17:00
Tuesday 08:00 - 17:00
Wednesday 08:00 - 17:00
Thursday 08:00 - 17:00
Friday 08:00 - 15:30

Telephone

+27114528795

Website

Alerts

Be the first to know and let us send you an email when Fluid Power Group posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share