Quality Inspection & Engineering Services

Quality Inspection & Engineering Services Providing the highest level of inspection services, non-destructive testing, vendor pre-shipping ins

On-site radiography at Total Alrode Depot.QIES continues to support clients with specialised inspection capability in th...
26/08/2026

On-site radiography at Total Alrode Depot.

QIES continues to support clients with specialised inspection capability in the field, combining the right equipment, qualified personnel and disciplined ex*****on.

Radiographic testing remains an important tool for verifying weld and component integrity in industrial environments where reliable inspection matters.

Inspection. Integrity. Engineering Excellence.

The best time to find a problem is before the next stage begins.Inspection hold points allow important requirements to b...
17/08/2026

The best time to find a problem is before the next stage begins.

Inspection hold points allow important requirements to be checked before fabrication progresses.

Depending on the project, these checks may take place around material verification, fit-up, welding, NDT, dimensions or coating. The objective is not simply to find problems. It is to verify that critical work has been completed correctly before the next stage begins.

Good inspection supports better quality control, reduces avoidable rework and strengthens confidence throughout the fabrication process.

Inspection. Integrity. Engineering Excellence.

Some inspections require seeing what can't be seen from the outside.Borescope inspection allows our team to examine the ...
30/07/2026

Some inspections require seeing what can't be seen from the outside.

Borescope inspection allows our team to examine the internal condition of pipelines and other difficult-to-access areas without unnecessary disruption, providing accurate information to support maintenance and asset integrity decisions.

At QIES, every inspection is carried out with the same commitment to technical excellence, verification and quality.

Inspection. Integrity. Engineering Excellence.

A qualified welder is only one part of a controlled welding process.WPS, PQR and WPQ each serve a different purpose:- WP...
16/07/2026

A qualified welder is only one part of a controlled welding process.

WPS, PQR and WPQ each serve a different purpose:

- WPS defines how the weld must be produced.
- PQR demonstrates that the procedure can produce an acceptable weld.
- WPQ confirms that the welder is qualified to perform the required process.

These controls work together to support welding consistency, compliance and technical accountability. They are connected, but they are not interchangeable.

Welding quality depends on qualified procedures, competent personnel and disciplined ex*****on.

QIES is looking for experienced inspectors and technicians for upcoming projects in Durban, Johannesburg, Cape Town, Por...
14/07/2026

QIES is looking for experienced inspectors and technicians for upcoming projects in Durban, Johannesburg, Cape Town, Port Elizabeth and East London.

We are recruiting:

• E&I Vendor Inspectors
• Mechanical Vendor Inspectors
• Level 2 Welding Inspectors
• Coating Inspectors
• NDT Technicians
• PWHT Technicians
• IPE Inspectors
• CP Inspectors

Candidates must be qualified in the relevant discipline and have at least five years' experience.

Please send your CV and certificates to [email protected] before 31 July 2026.

One thickness reading gives you a number. A corrosion map gives you a pattern.Corrosion does not always develop evenly, ...
03/07/2026

One thickness reading gives you a number. A corrosion map gives you a pattern.

Corrosion does not always develop evenly, which means a single wall thickness reading may not show the full condition of an asset. Corrosion mapping uses structured ultrasonic measurements across a defined area to help identify localised thinning, reveal wall-loss patterns and highlight areas that may need closer attention.

This gives asset owners better information to support maintenance planning and informed asset integrity decisions.

At QIES, inspection is not based on assumption. It is based on verification.

A finding only adds value when it is documented properly.Inspection is not complete without clear, traceable reporting.G...
24/06/2026

A finding only adds value when it is documented properly.

Inspection is not complete without clear, traceable reporting.

Good documentation supports compliance, accountability and better decision-making long after the inspection is done.

At QIES, reporting is part of the standard, not an afterthought.

When the stakes are high, accreditation matters.Inspection is about more than completing a check. It depends on discipli...
12/06/2026

When the stakes are high, accreditation matters.

Inspection is about more than completing a check. It depends on disciplined procedures, competent personnel and reporting that supports confidence in the result.

At QIES, inspection integrity is built through consistency, technical discipline and credible processes that support compliance and asset reliability.

Inspection is not routine when asset integrity is on the line.On-site inspection plays a critical role in understanding ...
28/05/2026

Inspection is not routine when asset integrity is on the line.

On-site inspection plays a critical role in understanding asset condition, supporting compliance, and helping prevent larger operational risks.

At QIES, every inspection is approached with discipline, care, and a focus on long-term asset integrity.

27/05/2026

Strong industry starts with skilled people.

As the transport and industrial space continues to change, real progress will always depend on more than infrastructure alone.

It also depends on people, practical skills, and the capability needed to keep industry moving forward.

At Epic Bulk Industries, we believe long-term progress is built through both strong systems and strong people.

Because behind every step forward is the skill, effort, and development that makes it possible.

Engineering movement. Powering the future.

Learn more at www.epicbulk.co.za

Address

Durban
4001

Opening Hours

Monday 08:00 - 16:00
Tuesday 08:00 - 16:00
Wednesday 08:00 - 16:00
Thursday 08:00 - 16:00
Friday 08:00 - 16:00

Website

Alerts

Be the first to know and let us send you an email when Quality Inspection & Engineering Services posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Quality Inspection & Engineering Services:

Shortcuts

Share

Category