What are the opening hours?

Monday 08:00 - 17:00 Tuesday 08:00 - 17:00 Wednesday 08:00 - 17:00 Thursday 08:00 - 17:00 Friday 08:00 - 16:00

Mactool Diamond & Construction Products

Home
South Africa
Cape Town
Mactool Diamond & Construction Products

Directions Website

Quality Diamond & Construction Products
Based in South Africa 🇿🇦
22 Years Experience
Branches in Cape Town, Jhb & Durban

29/10/2026

Getting into stone fabrication or countertop work does not have to mean spending a fortune on blades. The Tool‑Co HS230EG gives you professional performance at a price that keeps your margins healthy. Its 12mm segment height delivers exceptional life across granite, quartz, and natural stone, while the turbo segmented rim keeps cutting fast and cool. It also handles hard facebrick and concrete when the job requires it. 230mm diameter, 2.8mm kerf, and 22.23mm bore fit most bridge saws, table saws, and angle grinders used in stone shops. Quality and value – without compromising on either.

🪨 Granite, Quartz & Stone – Engineered for clean, fast cutting on hard materials.
⚡ Turbo Segmented Rim – Aggressive cutting with cooling for continuous use.
📏 12mm Segment Height – Delivers exceptional life, cutting more slabs per blade.
💰 Budget‑Friendly – Professional performance without the premium price tag.
🔩 22.23mm Bore – Fits most bridge saws, table saws, and angle grinders.
🔧 2.8mm Kerf – Clean, controlled cuts with minimal material waste.

Quality stone cutting without breaking the bank.
www.MACTOOL.co.za
021 552 8566 | [email protected]

27/10/2026

Mixing large batches of adhesive, thinset, or plaster demands a machine that delivers consistent results without compromising operator safety. The Raimondi Iperbet Pot Mixer uses a fixed paddle and a rotating bucket system to mix at low RPMs, ensuring a homogenous blend without entrapping air. This setup allows you to safely check the mix quality while the machine is running. With a production capacity of 300kg per hour and a 25 to 1 gear ratio, it powers through heavy materials like concrete, quartz plasters, and mortar. It comes supplied with two 45-litre buckets and a standard mixing blade to get you started on site.

🔄 Fixed Paddle, Rotating Bucket – Enhances operator safety and lets you check the mix while it runs.
💨 Low RPM Mixing – Prevents air entrapment for a perfectly homogenous, smooth mix.
⚡ 1400W Motor – Delivers a production capacity of up to 300kg per hour with a 25:1 gear ratio.
📦 Ready To Work – Supplied with two 45-litre buckets, a standard mixing blade, and a hex key.

Upgrade your mixing station today.
www.MACTOOL.co.za
021 552 8566 | [email protected]

22/10/2026

When accuracy matters on large-format tiles and stone, your saw needs to glide effortlessly. The Manta ED range delivers rugged, precise, and versatile cutting at an accessible price point. Available in 1.5m and 2m versions, the cutting head slides smoothly on two chromium-plated ground bars with linear ball bearings, ensuring highly accurate cuts every time. The 2200W motor powers through material up to 110mm deep, while the tilting head allows for precise 45-degree bevel cuts. A submersible pump sits inside the base to keep the blade cool, and vertical adjustments are easily made with the handwheel. Built with integrated angle legs for stability.
Please note that the 350mm blade is sold separately.

📏 High-Precision Rails – Head glides on chromium-plated ground bars with linear ball-bearings for extreme accuracy.
📐 45° Tilting Head – Features integrated angle legs and a handwheel for precise vertical adjustments and bevel cuts.
💧 Built-In Water Pump – Submersible pump housed in the base keeps the blade cool for clean cutting.
⚡ Powerful & Versatile – 2200W motor cuts up to 110mm deep, available in 1.5m and 2m cutting lengths.

Get the precision your projects deserve.
www.MACTOOL.co.za
021 552 8566 | [email protected]

20/10/2026

Marble and soft stone require a blade that cuts cleanly without chipping or breakout. The Tool‑Co Standard Centre Marble Blade is designed specifically for this delicate material. Its dedicated bond runs smoothly through softer stone, delivering clean, precise edges with minimal waste and a professional finish. With a 10mm segment height and a 50/60mm bore, it fits standard bridge saws and wet cutters. Keep your slabs protected and your edges flawless from the first cut to the last.

🪩 Optimised For Marble – Gentle bond designed to reduce edge chipping and breakouts.
📏 10mm Segment Height – Provides long life and consistent cutting stability.
🔧 50/60mm Bore – Direct fit for most professional bridge saws and wet cutters.
💧 Wet Cutting Only – Water‑cooled operation controls dust and prevents overheating.

For flawless finishes on every marble slab.
www.MACTOOL.co.za
021 552 8566 | [email protected]

15/10/2026

The Conglory CMT‑600Z is a walk‑behind power trowel built for residential floors, garage slabs, and detail work. With a 590mm trowel diameter and a 5.5HP engine, it delivers a smooth, even finish with precision. The 140RPM rotation and four‑blade design ensure consistent coverage, while the 56kg operating weight keeps it stable and easy to handle. Whether you are finishing a small pour or working in a confined space, the CMT‑600Z delivers the professional result you expect.

🏗️ 5.5HP Engine – Reliable power for small to medium pours and finishing work.
🔄 590mm Trowel Diameter – Precise coverage for residential slabs and detail areas.
⚙️ 140RPM, 4 Blades – Consistent rotation for a smooth, even surface.
⚖️ 56kg Operating Weight – Stable and easy to handle on site.

Professional finishing, made manageable.
www.MACTOOL.co.za
021 552 8566 | [email protected]

13/10/2026

If you own a Sigma 3E4M 1.2m manual tile cutter, there is something you should know. The original Klick Klock handle and 15mm wheel have been discontinued. That means when your current handle eventually wears out or gets damaged, you cannot replace it with the same part. The new Series 3 MAX handle is the direct replacement, and it comes with a 19mm wheel. It is a genuine Sigma part, made in Italy, and fits your existing cutter. No modifications needed. Just swap the old handle for the new one and keep working. If you rely on your 3E4M every day, it is worth knowing this now rather than mid‑job.

🔧 Discontinued Part – The Klick Klock handle (SIG12802) and 15mm wheel are no longer available.
🎯 Direct Replacement – The Series 3 MAX handle (SIGS0012) fits your existing 3E4M cutter.
📏 Upgraded Wheel Size – Replaces the old 15mm wheel with a 19mm wheel (SIGS0010) for improved scoring performance.
🇮🇹 Genuine Sigma Quality – Made in Italy for reliable performance on site.

Stay ahead of the change.
www.MACTOOL.co.za
021 552 8566 | [email protected]

08/10/2026

Core drilling is about more than just power. The bit you choose determines how fast you cut, how clean the hole is, and how long the barrel lasts. The Tool‑Co LZZ Premium Core Barrels feature an optimised matrix‑ordered diamond array that dramatically improves cutting speed and bit life. From standard concrete cores to a specialised 109mm asphalt bit, this range covers sizes from 42mm to 450mm. All barrels use a 1‑1/4 inch UNC thread for direct fit on standard rigs. Built for professionals who need reliable performance on every hole.

💎 Optimised Diamond Matrix – Ordered array pattern for faster cutting, cleaner holes, and longer life.
📏 Wide Size Range – 42mm to 450mm, including a specialised 109mm asphalt bit.
🔩 1‑1/4 inch UNC Thread – Fits standard core drilling equipment without adaptors.
⚡ Superior Performance – Outperforms most bits on the market for speed and durability.

Get the bit that works as hard as you do.
www.MACTOOL.co.za
021 552 8566 | [email protected]

06/10/2026

Cutting large format tiles and slabs demands a system that delivers accuracy and stability across long lengths. The Raimondi Raizor MKII is a professional rail cutting system engineered for this purpose. Its lightweight, high‑rigidity aluminium rails provide accurate and controlled scoring on porcelain, ceramic, and gauged panels. The die‑cast cutting unit transfers operator pressure directly onto the tile for consistent, clean results, while the TiAlN‑coated Ø22mm cutting wheel with built‑in bearing ensures maximum smoothness and wear resistance. Weighing just 5.4kg, the system is portable and easy to transport between job sites. The included SNAP pliers provide controlled breaking, making it a complete solution for professional tilers.

🚆 Rigid Yet Lightweight Rail: Extruded aluminum profiles are 28% more rigid than the previous version while remaining easy to carry and set up.
🎯 Precision Cutting Unit: A die-cast aluminum carriage glides smoothly on bearing-mounted resin wheels, transferring full operator pressure directly to the tile for flawless scoring.
💎 Advanced Scoring Wheel: Features a Ø 22 mm wheel with a built-in bearing and a wear-resistant TiAlN (Titanium Aluminium Nitride) coating for extreme durability and smooth, precise cuts.
🔧 Effortless Snapping: The included SNAP pliers (for tiles 3-12 mm thick) apply progressive, controlled pressure for clean breaks, with adjustable rubber feet to protect the slab surface.

Perfect for tilers and fabricators working with porcelain, stone, and ceramic slabs.

Ready to upgrade your cutting capabilities?
Email or call us for pricing and availability:
www.MACTOOL.co.za
021 552 8566 | [email protected]

01/10/2026

Polishing stone, marble, and tombstones calls for a tool that can handle dust, moisture, and long hours on the job. The KYNKO KD05 is a 150mm stone polisher with a 710W motor and 4500 RPM no-load speed. Its industrial plastic housing makes it lighter and safer to handle, especially in wet working conditions. Water and dust-resistant construction protects the internals, while the enlarged rotor diameter improves working efficiency on every pass. A front bearing oil seal prevents water ingress, and the labyrinth dust-proof gearbox ensures a long service life. Widely used in stone workshops for tombstone polishing and surface finishing.

⚡ 710W Motor, 4500 RPM – 150mm wheel capacity for efficient polishing on stone and marble.
🛡️ Industrial Plastic Housing – Lighter and safer to handle, especially in wet conditions.
💧 Water & Dust Resistant – Front bearing oil seal and labyrinth gearbox protect the internals.
🪦 Built For Stone Work – Widely used for tombstone polishing, marble, and stone surfaces.

Polish with power, comfort, and reliability.
www.MACTOOL.co.za
021 552 8566 | [email protected]

29/09/2026

Some job sites need the freedom of a handheld drill. Others need the stability of a stand. The Tool‑Co DMT‑8 gives you both. Run it handheld for tight spaces and smaller diameters up to Ø92mm, or lock it onto the ST250 stand for larger work up to Ø162mm. The 2200W motor has three speeds (650 / 1300 / 2600 RPM) to suit the material and the bit. Smart LED alerts warn you of overload or worn brushes before they cause damage. The built‑in spirit level keeps you straight, and the quick water connector makes wet and dry drilling simple. One machine. Every job covered.

🔩 Two Ways To Work – Handheld up to Ø92mm or stand‑mounted up to Ø162mm with the ST250.
⚡ 3‑Speed Control – 650 / 1300 / 2600 RPM for concrete, stone, and masonry.
🔧 Smart LED Alerts – Overload and brush wear warnings protect your investment.
💧 Quick Water Connector – Fast switching between wet and dry drilling.
🎯 Built‑In Spirit Level – Accurate alignment for every hole.
🏗️ 2200W Motor – Reliable power for demanding site work.

One core drill. Every job covered.
www.MACTOOL.co.za
021 552 8566 | [email protected]

Address

Unit 6 Pennisi Park, 3 Jig Avenue, Montague Gardens
Cape Town
7441

Opening Hours

Monday	08:00 - 17:00
Tuesday	08:00 - 17:00
Wednesday	08:00 - 17:00
Thursday	08:00 - 17:00
Friday	08:00 - 16:00

Website

http://www.mactool.co.za/

Alerts

Be the first to know and let us send you an email when Mactool Diamond & Construction Products posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.