BAMR

BAMR Over 75 years of experience and expertise in the Coatings, Corrosion, Physical Paint Testing and All

One of the most common mistakes we see in coating inspection is not using the correct instruments. 🔧It's not always abou...
19/06/2026

One of the most common mistakes we see in coating inspection is not using the correct instruments. 🔧

It's not always about operator error — often it comes down to using a gauge that isn't suited for the job, or one that hasn't been properly calibrated for the substrate or coating type being measured.

The result? Readings that look fine on paper but don't reflect what's actually happening on the surface.

In an industry where coating failure carries real cost, the right instrument isn't a nice-to-have — it's essential.

If you're unsure whether your team is using the correct instruments for coating inspection, reach out to us at [email protected] — we're happy to help.

Getting the basics right makes all the difference. 🎯Graham recently visited the attendees of the training conducted at E...
15/06/2026

Getting the basics right makes all the difference. 🎯

Graham recently visited the attendees of the training conducted at EI Sandblasting for a hands-on introduction to coating inspection — covering the fundamentals of surface preparation, dry film thickness measurement, and what to look out for in the field.

In an industry where corners are easily cut, understanding the basics of coating inspection is what separates a coating that lasts from one that fails prematurely.

A big thank you to EI Sandblasting for having us — it's always a pleasure working with teams who are committed to getting it right.

Looking for the right instrumentation to support your coating inspection process? Reach out to us at [email protected]

Moisture is invisible. So is the damage it causes — until it's too late.One of the most common reasons a coating fails i...
11/06/2026

Moisture is invisible. So is the damage it causes — until it's too late.

One of the most common reasons a coating fails isn't poor application. It's moisture in the substrate that nobody checked for before the job started.

Wood, concrete, plaster — if there's moisture present and you coat over it, you're setting yourself up for blistering, peeling and costly rework.

A moisture meter takes the guesswork out of the equation. A quick, non-destructive reading tells you whether a surface is ready to coat — before a single drop of paint goes down.

It's a small step that prevents a very expensive problem.

Ask us about our range of moisture meters for wood, concrete and building materials. 👇

đź“© [email protected] | bamr.co.za

1946. A father starts a business with a simple belief — that quality instrumentation, backed by honest service, makes a ...
09/06/2026

1946. A father starts a business with a simple belief — that quality instrumentation, backed by honest service, makes a difference.

Fast forward to today. Three generations of the Duk family later, that belief hasn't changed.

Fred built the foundation. His son Frank took the reins. And now Graham carries the torch — with the same values, the same passion for precision, and the same personal touch that started it all.

Nearly 80 years in, we're proud of where we've come from. And even more excited about where we're going.

Thank you to every client, partner and industry colleague who has been part of this journey. 🇿🇦

How long have you been working with BAMR? We'd love to hear from you. 👇

🛠️💻 Elcometer One-Day Training | June 2026 — Now Available In-Person & Online | Spots Filling Fast!If you work in coatin...
05/06/2026

🛠️💻 Elcometer One-Day Training | June 2026 — Now Available In-Person & Online | Spots Filling Fast!

If you work in coatings inspection, corrosion, or NDT — this is for you.

BAMR is hosting official Elcometer hands-on training workshops across South Africa this June:

Durban – Mount Edgecombe

• Wednesday 17 June: One Day Course – Mount Edgecombe Country Club Estate

Cape Town – Kelvin Grove, Newlands

• Thursday 18 June: One Day Course – Kelvin Grove, Newlands

• Friday 19 June: Half Day ElcoMaster PQA course – Kelvin Grove, Newlands

Johannesburg – Country Club Johannesburg

• Monday 22 June: One Day Course – Country Club Johannesburg, Auckland Park

• Tuesday 23 June: Half Day ElcoMaster PQA course – Country Club Johannesburg, Auckland Park

đź’» Can't make it in person? We now offer Online Training too!

📅 Full Day – Thursday, 18 June 2026 | R1,250 per person

📅 Half Day – Friday, 19 June 2026 | R750 per person

All sessions are designed to help you get the best accuracy and performance from your Elcometer instruments — covering coating thickness, surface preparation, adhesion testing, and more.

Spots are limited. Reach out to us at [email protected] or call 021 683 2100 to reserve your place.

80 years of people, partnerships, and progress.On 22 May, we took a moment to celebrate it all—together—with a day of bo...
03/06/2026

80 years of people, partnerships, and progress.

On 22 May, we took a moment to celebrate it all—together—with a day of bowls and a special lunch at Constantia Glen.

These moments remind us what really matters. Thank you for being part of our story. 🎉

01/06/2026

🎙️ Just in: Our Director, Graham Duk was interviewed on Coastal Radio!

We discussed the importance of training and awareness of corrosion control. As well as the upcoming Coatings for Africa Event to be held in JHB in June.

Listen to the full interview here 👇

https://lnkd.in/dvwV5N-k

What are your thoughts on this? Drop a comment below!



🧪 MYTH BUSTED: “Thicker coating = better protection”This is one of the most common assumptions in the coatings industry…...
28/05/2026

🧪 MYTH BUSTED: “Thicker coating = better protection”

This is one of the most common assumptions in the coatings industry… but it’s not always true.

While it might seem logical that more coating means more protection, the reality is more complex.

👉 If a coating is applied too thick:
It may not cure properly
It can crack or peel over time
It may lose adhesion to the surface
It can actually reduce long-term performance

👉 What really matters is:
✔️ Correct surface preparation
✔️ Proper coating system selection
✔️ Accurate film thickness (as specified)
✔️ Controlled application process

The goal isn’t “more coating” — it’s the right coating, applied correctly.
That’s exactly why measurement and inspection are so critical in ensuring long-term protection.

🚨 Something exciting is coming this June!Join us for Elcometer Training AND the Coatings Show at the Sandton Convention ...
27/05/2026

🚨 Something exciting is coming this June!

Join us for Elcometer Training AND the Coatings Show at the Sandton Convention Centre — the perfect opportunity to sharpen your skills and stay ahead in the coatings industry.

🔥 Hands-on training
🔥 Latest technology & techniques
🔥 Industry insights + networking

Spots for the training are limited, so don’t wait!

đź“© Get in touch to book your place.
[email protected]

Three generations. One commitment to excellence.BAMR was founded in 1946 by Fred Duk, built further by Frank Duk, and to...
20/05/2026

Three generations. One commitment to excellence.

BAMR was founded in 1946 by Fred Duk, built further by Frank Duk, and today continues under the leadership of Graham Duk.

For 80 years, our business has remained rooted in the same values — quality, trust, and long-term relationships with our customers and partners.

Being a family business means more than just a legacy. It means accountability, consistency, and a personal commitment to delivering the best in everything we do.

We’re proud of where we come from — and excited for where we’re going.

Address

4 Palm Street
Cape Town
7700

Opening Hours

Monday 08:00 - 17:00
Tuesday 08:00 - 17:00
Wednesday 08:00 - 17:00
Thursday 08:00 - 17:00
Friday 08:00 - 16:00

Website

Alerts

Be the first to know and let us send you an email when BAMR posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to BAMR:

Shortcuts

Featured

Share

Category