Mr Turbo

22/04/2026

Two post car lifts are back in stock
220V single phase
R33k each.
Bulk orders of three or more units qualify for a discount,
please contact us for details.

29/03/2026

R3990 while stock lasts

14/07/2025

UPGRADE SMARTER. BOOST HARDER.

Stop settling for “good enough”. The Garrett G-Series II steps up every critical metric the moment you bolt it on:

Up to 10 % higher compressor flow vs. Gen I at peak PR & RPM – perfect for those chasing the next dyno milestone.

Larger efficiency island at high flow rates means lower charge temps, happier pistons and more repeatable pulls on scorch-hot SA summer days.

Standard & reverse-rotation options across multiple frame sizes – from 2-litre fours to monster V8 drag builds.

Oil restrictor + water fittings included out-the-box – no parts-store scavenger hunt.

Same footprint as Gen I – kit-makers can upsell existing customers with a zero-fabrication CHRA swap that unlocks fresh horsepower and reliability.

Call us!
📞 011 823 2525

Whatsapp us!
📱 WhatsApp 072 546 0526

14/07/2025

🆕🔥 NEW ARRIVAL: HSP03 HEAT SHIELD PLATE

Want to keep exhaust temps where they belong and protect everything else under the bonnet?
Meet the HSP03 Heat Shield Plate – rolled from 304-grade stainless and textured for extreme thermal control.

Why you’ll love it:
⚙️ Sizeable sheet (60 cm × 100 cm) – cut, bend, or wrap to suit manifolds, dump pipes, intakes, firewall panels, or even floor pans.
🚗 Double-sided dimple design traps air and deflects radiant heat for cooler engine bays and happier sensor wiring.
🔧 DIY-friendly – scissors, tin snips, or a cutoff wheel is all you need.
💪 304SS withstands repeated heat cycles, salt, grime, and track-day abuse without flaking or rusting.

Ready to wrap & roll?
📞 011 823 2525 | 📱 WhatsApp 072 546 0526

Hashtags

20/06/2025

Garrett 881649-6001 Intercooler Upgrade
Supports up to 499 kW | Direct Fit | OEM Compatible

This is the real deal, 100% original Garrett quality, engineered to outperform.
There is nothing that can match this on the market. This is not a lightweight, cheap knockoff that will heat soak quickly.
Designed as a direct-fit upgrade for the 2011–2020 Ford Ranger, Raptor, Everest, and Mazda BT-50 (3.2L / 2.2L / 2.0L), this intercooler boosts performance with a 218% larger core, improved flow, and no heat soak.

Installs in just 2 hours using factory bolts, clamps, and hoses.
2.0L applications require hose replacement.

Performance Highlights:
🚀 218% Larger Core
🔥 Rated for up to 499 kW
⏱️ 2.0 Hour Install Time
🔩 Reuses OE bolts, clamps & hoses
📊 Huge flow and volume gains over stock

Fitment:
Ford Ranger / Raptor / Everest (2011–2020)
Mazda BT50 (3.2L / 2.2L / 2.0L*)

📞 011 823 2525
📱 WhatsApp: 072 546 0526

19/06/2025

GTX3582R GEN II Turbo R28 920.00
450–850HP | Ball Bearing | V-Band | Water & Oil Cooled

This turbocharger is part of the legendary GTX GEN II lineup, built to handle serious flow and high boost levels.
Featuring a fully machined compressor housing with anti-surge inlet, advanced billet compressor wheel, and dual ceramic ball bearing design, it's made for high-output, hard-use builds that demand both response and power.

GTX3582R GEN II Specs:
🔧 Compressor Wheel: 66mm inducer / 82mm exducer
🔥 Turbine Wheel: 62mm inducer / 68mm exducer
🌀 Compressor Housing A/R: 0.70 (with anti-surge)
💨 Turbine Housing A/R: 0.82 V-Band
💧 Water & Oil Cooled
⚙️ Dual Ceramic Ball Bearing
📏 Rated for 2.0L – 4.5L applications

We are the official Master Distributor for Garrett Motion in South Africa. Stock available now.

📍 Johannesburg
📞 011 823 2525
📱 WhatsApp: 072 546 0526

19/06/2025

GTX3076R GEN II Turbo R23 210-00
400–750HP | Ball Bearing | V-Band | Water & Oil Cooled

Designed for performance applications demanding fast spool and strong top-end delivery. A trusted option for street and race builds in the 1.8L to 3.0L range, delivering proven results with modern efficiency.

GTX3076R GEN II Specs:
🔧 Compressor Housing A/R: 0.60 (Anti-Surge)
🌀 Compressor Wheel: 58mm / 76mm
🔥 Turbine Wheel: 55mm / 60mm
💨 Turbine Housing A/R: 0.63 V-BAND
💧 Water & Oil Cooled
⚙️ Dual Ball Bearing
📏 Displacement Range: 1.8L – 3.0L

We are the official Master Distributor for Garrett Motion in South Africa.
Stock available now.

📍 Johannesburg
📞 011 823 2525
📱 WhatsApp: 072 546 0526

19/06/2025

GTX2867R GEN II Turbo R19 480.00
275–550 HP | Ball Bearing | V‑Band | Water & Oil Cooled

A compact, high-performance turbo designed to deliver fast spool and strong top-end power. Ideal for builds in the 1.4L to 2.5L range where precision boost control and responsive driveability matter.

GTX2867R GEN II Specs:
🔧 Compressor Housing A/R: 0.60 (Anti-Surge)
🌀 Compressor Wheel: 50mm / 67mm
🔥 Turbine Wheel: 47mm / 53.8mm
💨 Turbine Housing A/R: 0.63 V-BAND
💧 Water & Oil Cooled
⚙️ Dual Ball Bearing
📏 Displacement Range: 1.4L – 2.5L

📍 Johannesburg
📞 011 823 2525
📱 WhatsApp: 072 546 0526

We are the official Master Distributor for Garrett Motion in South Africa. Stock available now.

18/06/2025

15/06/2025

GTX3076R GEN3 Turbo R13 300.00
750HP | Ball Bearing | Internal Wastegate | Water & Oil Cooled
Part number TURBO-008R

Built for power-hungry applications, this unit brings fast response and serious airflow. Whether you're running a 2.0L street machine or a high-revving track car, this turbo has the powerband and flow to back it up.

Ideal for 2.0L to 3.5L builds making 600–750HP.

Specs:
🔧 Turbine A/R: 0.63
🌀 Compressor A/R: 0.50
🔥 Compressor Wheel: 58mm / 76mm
💨 Turbine Wheel: 55mm / 60mm (G-SERIES AERO)
💧 Water & Oil Cooled
⚙️ Ball Bearing Core
🏁 Internal Wastegate

📍 Johannesburg
📞 011 823 2525
📱 WhatsApp: 072 546 0526