Indlovu Enterprises

23/09/2024

⚡️ HIGH VOLTAGE PROOF SPLIT UNITS (AC/DC SPLIT PROOF TESTERS) ⚡️

Our Proof Split Proof Tester platform offers various output voltages ranging from 35kV AC, 50kV DC to 85kV AC, 120kV DC. Metering options are analogue or digital.

⚡️ MAIN FEATURES

• Ease of use
• Portable
• Robust Design
• Mains Powered
• Custom Design
• Split Unit Design
• 35kVAC/50kVDC, 50mA Continuous to 85kVAC/110kVDC

⚡️ PRINCIPLES OF OPERATION

All the units use the input voltage through a step up transformer to obtain the high AC voltages. In case of DC output the AC is rectified through a suitable rectifier capable of withstanding the high voltages. Some units use a combination of AC and DC that is switched to deliver AC or DC or both. In the case of VLF equipment a pseudo sine wave is produced through a number of switches and resistors.

The outputs are current limited and the unit automatically trips when a set limit is reached. When this occurs the cable is discharged and made safe through a built in discharge resistor. In case the circuit layout does not allow (in case of split units) the automatic discharge of the cable, a suitable manual discharge resistor is supplied.

Follow the link below or get in touch with an Adret consultant for more information on our Proof Split Units.

https://adrettest.com/high-voltage-proof-split/

23/09/2024

⚡ SVERKER 750/780 Relay and Substation Test System by Megger UK ⚡

The rugged and reliable toolbox for relay and substation testing - Megger’s SVERKER 750/780 offers secondary relay testing and primary injection for electrical distribution substations, renewable power generation stations, and industrial applications.

The SVERKER 750 and SVERKER 780 relay test sets are the engineer's toolbox. The control panel features a logical layout, so SVERKER 650 users will find it comfortably familiar and will be able to start work right away. These instruments are intended primarily for secondary testing of protective relay equipment. Virtually all types of single-phase protection can be tested. You can also test three-phase protection by testing one phase at a time, as well as a number of protective relay systems that require phase shifting, and automatic reclosing devices.

These instruments feature many functions that make relay testing more efficient. For example, they have a powerful measurement section that can display, in addition to time, voltage, and current, Z, R, X, S, P, Q, phase angle, and cos φ. The voltmeter can also be used as a second ammeter (when testing differential relays, for example). All values are presented on a single easy-to-read display.

You can also test directional protective equipment efficiently by means of the built-in variable voltage source. In the SVERKER 780, this has a continuous phase shift function and adjustable frequency as well, and automatic reclosing devices can also be tested just as easily.

Since the compact SVERKER weighs only 18 kg (39 lbs), it’s easy to move from site to site. Two or more SVERKER units can also be synchronised, which allows you to operate a basic three-phase test set.

Designed to comply with EU standards and other personal and operational safety standards, the SVERKER 750 and SVERKER 780 are also equipped with a serial port for communication with personal computers and the PC software SVERKER Win.

Get in touch with our team for more information on this Relay and Substation Test System.

https://indlovuenterprises.co.za/

02/09/2024

Visit the Adret Test Equipment stand at Electra Mining Africa between 2-6 September ⚡️

10/07/2024

CABLE NETWORK MAINTENANCE

Maintaining a high standard for your cable network? We've got you covered with unrivalled services :

⚡️ Cable Fault Location
⚡️ Cable Route Tracing
⚡️ Cable Proof Testing
⚡️ Cable Identification
⚡️ Cable Quality Analysis
⚡️ Proof Testing and Calibration

Partner with Indlovu Enterprises for reliable Cable Fault Location solutions and exceptional service.

Explore more at https://indlovuenterprises.co.za/

09/05/2024

⚡Introducing the ADX15A Automated Diagnostic Static motor Tester from Megger UK⚡

The ADX series of models are designed to perform tests at up to 15,000 V and can be coupled with power packs to increase test voltages to 30 kV or 40 kV. This flexibility allows you to conduct AC and DC motor partial discharge and low impedance testing on all motors, generators, coils, and other devices.

ADX Tests
‍
Winding Resistance
Insulation Resistance
Inductance
Capacitance
Partial Discharge on Surge
Dielectric Analysis (DA)
Polarization Index (PI)
Dielectric Analysis (Da)
DC Step-Voltage
DC Continuous Ramped
DC HiPpot
EAR+™
DC Armature Testing
Power Pack Interface 30kV and 40kV

The ADX is designed to increase your productivity through simplified work flows thanks to its combined manual and automatic testing, sequence-based test procedures, route-based testing, instant test-related help and customisable folder structures. The ADX is the smartest way to save you money and time

When connected to the internet, asset management with the ADX amplifies. Combined with the PowerDB dashboard (a cloud-based application) you can create and edit routes, assets, test configurations, and installations. These are automatically uploaded to the Realm server and can be synchronised with the ADX or other team members.

The diverse test capabilities of the ADX allows it to meet the testing needs of OEM’s, industrial maintenance engineers, motor repair shops and field service engineers.

The development of the ADX focused on the industries and environments over the product itself, understanding our customers’ needs and meeting them in a way that makes your jobs easier and prevents motor downtime.

This focus is exemplified in features that include a full QUERTY water and dust repellant keyboard, direct printing from the ADX both wireless and wired, simple data importing from the Megger Baker AWA and DX, EAR+™ , and the ability to add images to assets.

Get in touch with our team for more information on the Megger ADX15A ⚡

19/04/2024

⚡️ MEGGER TRAX – TRANSFORMER & SUBSTATION TEST SYSTEM ⚡️

“Simplicity is the ultimate sophistication.”

One product. One software. One world.

TRAX is not just another multi-functional test instrument, but rather many intelligent instruments built into one box. The software includes a number of apps, making it fast and easy to perform a large range of different tests. The hardware offers unmatched flexibility and the range of cables and accessories adds even more flexibility, making the TRAX an efficient and
time saving system for any user in the world

⚡️ One Product

TRAX is a multi-functional solution for transformer testing. It also adds several common substation testing functionalities, and ultimately replaces numerous individual testing devices. Compared
to conventional single-functionality instruments, TRAX saves time and is more cost effective.

TRAX applications range from power transformers, where it offers several unique and outstanding features, to instrument transformers, circuit breakers and many other substation components.

⚡️ One Software

What do we mean by ‘intelligent simplicity’? One instrument with just one software is, of course, easier to learn compared to different instruments with different software. Furthermore, through automatic information and software upgrades via Ethernet your TRAX software is always up-to-date and
equipped with the latest features.

Get in touch with our team for more information on this product.

The TRAX multifunction transformer and substation test system has an intuitive app-based infrastructure that transforms the unit into whatever test set is re...

22/03/2024

What a beautiful noise...

This video is an excellent example of Cable Thumping. Read the caption for a detailed breakdown of this technique 👇🏼

12/02/2024

Nothing better than equipping and empowering municipalities with world class equipment⚡️💪🏼

09/01/2024

The best of the best ⚡️ Adret Test Equipment

09/01/2024

Inside the powerful SG50016 by Adret Test Equipment