Wayne's Welding & Truck Equipment Upfitters

Wayne's Welding & Truck Equipment Upfitters A great place to do business with! Central New York's best truck up fitter and fabrication shop!!

We fabricated a fire hose turntable for a local fire department.
07/25/2022

We fabricated a fire hose turntable for a local fire department.

We recently made a hydraulic thumb for an extendable backhoe.
07/25/2022

We recently made a hydraulic thumb for an extendable backhoe.

A packer we did, where we replaced the floor and channels on for the slides. We also made new slider brackets for the pa...
09/26/2021

A packer we did, where we replaced the floor and channels on for the slides. We also made new slider brackets for the packer along with repairing the cracks and thins spots in the wall

Two trucks we upfitted for Village of Yorkville Dpw.  We installed an 11 ft stainless steel Galion box with an electric ...
09/01/2021

Two trucks we upfitted for Village of Yorkville Dpw. We installed an 11 ft stainless steel Galion box with an electric tarp and rear hitch plate on their new Ford. We removed an existing box from their Freightliner and installed a new 10 ft stainless steel Galion box and swapped their existing tarp system over to their new box.

A dump body we installed on a 2021 Ford F550. Customer supplied the dump box and we customized the cab shield to match c...
06/24/2021

A dump body we installed on a 2021 Ford F550. Customer supplied the dump box and we customized the cab shield to match contour of truck. We also added a hitch plate in the rear with receiver tube and installed a back up camera.

A few dumpsters we made for one of our customers out in Massachusetts.  Two twenty five yard dumpsters and one 20 yard d...
06/24/2021

A few dumpsters we made for one of our customers out in Massachusetts. Two twenty five yard dumpsters and one 20 yard dumpster.

A custom built toolbox. The customer wanted to be able to fit his chain saw with a 48in bar, hang up his gear, and still...
06/14/2021

A custom built toolbox. The customer wanted to be able to fit his chain saw with a 48in bar, hang up his gear, and still have room for plenty more.

An on trux system for a Ford truck we built for a customer. We lengthened the truck frame, custom  built a dual acting d...
05/26/2021

An on trux system for a Ford truck we built for a customer. We lengthened the truck frame, custom built a dual acting dump box. We built a flatbed with a beaver tail that has an electric winch with work lights.

We installed an on trux subframe on a new van body and installed a tool box, fenders, brake controller, and glad hands to the rear of the truck.

An asphalt liner we installed in an aluminum dump box.
05/20/2021

An asphalt liner we installed in an aluminum dump box.

Flat bed we fabricated for an on trux system, equipped with a hydraulic winch and retractable hose reel.
05/20/2021

Flat bed we fabricated for an on trux system, equipped with a hydraulic winch and retractable hose reel.

A hydraulic controlled pump-out station we made for a customer. Pump is used to empty seal coating tanks. Also has 3 val...
05/20/2021

A hydraulic controlled pump-out station we made for a customer. Pump is used to empty seal coating tanks. Also has 3 valves to control the drive motors for the augers on two seperate tanks.

Address

66 Calder Avenue
Yorkville, NY
13495

Opening Hours

Monday 8am - 4:30pm
Tuesday 8am - 4:30pm
Wednesday 8am - 4:30pm
Thursday 8am - 4:30pm
Friday 8am - 4:30pm

Telephone

+13153350526

Website

Alerts

Be the first to know and let us send you an email when Wayne's Welding & Truck Equipment Upfitters posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Wayne's Welding & Truck Equipment Upfitters:

Share

Category