What are the opening hours?

Monday 7am - 5pm Tuesday 7am - 5pm Wednesday 7am - 5pm Thursday 7am - 5pm Friday 7am - 5pm

Transland

Name: Transland
Address: 1206 Hatton Road, Wichita Falls, TX, 76302, US
Telephone: (940) 687-1965

Dispersal Equipment for Aerial Applicators

06/16/2026

Before sunrise, before the first load, before the engine turns—there’s work happening under the wing.
A careful boom inspection can mean the difference between a smooth day and problems that follow you into the air.
Transland boom systems are built for long seasons, vibration, and the realities of ag aviation.

06/12/2026

50% or 60%?
Choose the boom-shut-off setup that best fits your operation.
Transland Boom Shut-Off Kits are available with or without right-hand shut-off and can be configured for a variety of application needs.
Built for ag aviation. Built for the season.
Learn more? https://www.translandllc.com/booms/boom-shut-off/.

06/07/2026

EVERY WELDED BOOM HAS STRESS POINTS.
Transland weldless stainless steel booms are built to reduce them.
>>>Built for long seasons, vibration, and real ag aviation environments.

06/04/2026

EVERY PART MATTERS.
Because every component affects the result.
The boom system depends on the details:
Strainers. Clamps. Hangers. J-Tubes. Elbows. Ni***es.
>>>And during the season, availability matters.

05/31/2026

You can’t fix it in the air if it’s not right on the ground.
Flow control can hold the rate—but it can’t fix a pump that’s way off.
Set it right before you fly.

05/29/2026

If your system is chasing the target—you’re already behind.
Flow control isn’t meant to fight the system.
It’s meant to fine-tune it.
That’s why experienced pilots don’t run right on the edge.
They build margin:
✓ Slightly higher base pressure
✓ Stable supply to the boom
✓ Room for the system to regulate
When everything’s balanced, the system works.
When it’s not—it’s constantly correcting.
→The system only works as well as what it’s given.
Learn more about other parts impacting the system → https://tinyurl.com/yc4nv7pj
If your system is chasing the target, you’re already behind.

05/26/2026

Most pump failures don’t happen all at once.
They build over time.
• Worn impeller → unstable output
• Failing seal → leaks into bearings
• Dirty system → internal corrosion
Clean water matters.
End-of-day flushing matters.
And you might not notice it—
until the pattern changes.
Need to rebuild your pump → https://tinyurl.com/9bvz25z2

05/22/2026

As Memorial Day weekend approaches, Transland, Satloc, and CP will be closed Monday, May 25.
We encourage customers to plan ahead for orders and support requests whenever possible.
We also respectfully ask for minimum support needs during the holiday so our employees can spend time with their families.
Regular operations will resume Tuesday, May 26.
Thank you — and we wish everyone a meaningful Memorial Day weekend.

05/20/2026

More pressure doesn’t always fix the problem.
It can change it.

When you bump pressure:
• Pattern behavior changes
• Coverage acts different

Pressure isn’t a reset button.
It’s a fine-tune—within range.
If you’re outside that range,
you’re compensating for something else.

05/18/2026

Flow control holds the rate.
The pump makes it possible.
They need to work together.

If the pump isn’t right,
The system can’t be right.
→The system only works as well as what it’s given.
Start at the source → https://tinyurl.com/39jm6j56

Address

1206 Hatton Road
Wichita Falls, TX
76302

Opening Hours

Monday	7am - 5pm
Tuesday	7am - 5pm
Wednesday	7am - 5pm
Thursday	7am - 5pm
Friday	7am - 5pm

Telephone

(940) 687-1965

Website

http://www.TranslandLLC.com/

Alerts

Be the first to know and let us send you an email when Transland posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Transland:

Shortcuts

Address
Telephone
Opening Hours
Alerts
Contact The Business
Claim ownership or report listing

Want your business to be the top-listed Equipment Service in Wichita Falls?