ACI Controls

ACI Controls ACI Controls is a full-service technical sales organization providing solutions for a wide variety of industrial process control applications.

Since 1945, ACI Controls has been a leading supplier in the Industrial Process Control and Automation Industry. Specializing in pressure, level, temperature, flow, analytical, and vibration products, ACI serves the Industrial Process, Water/Wastewater, Electric Utility, Power Generation, Pharmaceutical and Oil/Gas Industries.

In semiconductor gas delivery systems, consistency matters just as much as cleanliness.Pressure instability, flow variab...
05/28/2026

In semiconductor gas delivery systems, consistency matters just as much as cleanliness.

Pressure instability, flow variability, and contamination risks often start at the point of use — especially when systems are expected to support both high-flow and low-flow demands.

A single regulation platform that performs reliably across the process helps simplify specs, reduce variability, and support uptime from sub-fab to cleanroom.

Most outage planning conversations start with cost. The variable that actually derails schedules is lead time.OEM supply...
05/26/2026

Most outage planning conversations start with cost. The variable that actually derails schedules is lead time.

OEM supply chains for gas turbine components can be long, especially for older equipment where parts aren't being actively stocked. Quality aftermarket suppliers who've invested in power generation inventory can often ship faster.

When you're working backward from a hard outage date, a few weeks of lead time difference is not a small thing.

It's worth knowing what's actually on the shelf before the window opens — not after.

In observance of Memorial Day, ACI Controls will be closed on Monday, May 25th.We honor and remember those who made the ...
05/22/2026

In observance of Memorial Day, ACI Controls will be closed on Monday, May 25th.
We honor and remember those who made the ultimate sacrifice in service to our country.

Leak integrity is easy to check at install and harder to maintain over time.In semiconductor applications, seal design a...
05/20/2026

Leak integrity is easy to check at install and harder to maintain over time.

In semiconductor applications, seal design and diaphragm material determine whether a regulator holds up under cycling, temperature changes, and aggressive gases. Small leaks turn into safety risks, contamination, and downtime.

What works better? Metal to metal sealing. High integrity diaphragm materials. Designs built for long term performance.

Parker Veriflo stands out in these environments and ACI helps ensure consistent performance in real operating conditions.

The goal of good control valve selection isn't to find the most impressive component.It's to find the one that stops bei...
05/18/2026

The goal of good control valve selection isn't to find the most impressive component.
It's to find the one that stops being a topic of conversation.

A well-selected valve—sized to the real operating range, matched to the service conditions, specified with the right materials and shutoff class, paired with an actuator that covers the safety requirements—just works.

The combustion loop holds. The burner responds the way it should. And your attention goes to the things that actually need it.

That's an outcome worth optimizing for

When your measurements don’t match reality, it’s usually not the analyzer. It’s the sample. We see it all the time. *Inc...
05/15/2026

When your measurements don’t match reality, it’s usually not the analyzer. It’s the sample. We see it all the time.

*Inconsistent readings
*Drift that comes and goes
*Operators chasing numbers that don’t line up

Most of it traces back to poor sample conditioning at the point of measurement.

If pressure, temperature, and flow aren’t controlled before the analyzer, the data isn’t reliable. And decisions based on it aren’t either.

Monitoring panels solve that at the source. They stabilize the sample. Standardize conditions. And give you a consistent point of verification.

The M4 Knick MP Monitoring Panel brings that control into one compact, pre-tubed system that’s ready to drop into your process

ACI Controls helps make sure it’s configured right for your application and performing in real conditions

When signal is lost, when power drops, when something goes wrong — your fuel gas control valve needs to move to a safe p...
05/13/2026

When signal is lost, when power drops, when something goes wrong — your fuel gas control valve needs to move to a safe position.

For most combustion applications, that means fail-closed.

Here’s the issue:

This gets treated as a default rather than a deliberate specification, and assumed rather than verified.

The actuator is part of the control system, so its behavior under abnormal conditions is as important as its behavior under normal ones.

Specify the fail-safe position explicitly. Then confirm it before the valve ever enters service.

Most regulators are selected for max flow.Your process does not run there. At low flow, small shifts in demand can creat...
05/11/2026

Most regulators are selected for max flow.

Your process does not run there. At low flow, small shifts in demand can create pressure swings if the regulator is not designed for it. That is where supply pressure effect and droop start to show up.

That is where process consistency starts to fall apart.

What works better? Regulators designed for stability across your actual operating range, not just capacity.

Parker Veriflo is built for that level of control and ACI helps match regulator performance to real process conditions.

One of the most common control valve mistakes in combustion applications is also one of the most avoidable:Oversizing.Th...
05/08/2026

One of the most common control valve mistakes in combustion applications is also one of the most avoidable:

Oversizing.

The instinct is understandable — size for worst case, stay safe.

The problem is, an oversized valve spends most of its life operating near the closed position. And small actuator movements create large flow changes, control becomes coarse, and wear concentrates in a narrow zone of travel.

But proper sizing matches the valve to the actual operating range of your system. Not the maximum capacity on paper. The range the system actually runs in, day in and day out.

The difference shows up in how well your combustion loop holds tuning, especially at low fire.

Contamination in semiconductor processes does not always come from the gas supply. It often shows up at the point of use...
05/06/2026

Contamination in semiconductor processes does not always come from the gas supply. It often shows up at the point of use.

Regulators with higher internal volume, poor surface finish, or the wrong sealing approach can introduce particles or slow down purge efficiency during changeouts.

That is where yield issues start to show up.

What works better? Low internal volume. Electropolished surfaces. Metal to metal sealing designed for ultra high purity service. Parker Veriflo regulators are built around those details. ACI helps ensure the right regulator is applied correctly at the point of use.

Address

West Seneca, NY
14227

Opening Hours

Monday 8am - 9am
9am - 5pm
Tuesday 8am - 9am
9am - 5pm
Wednesday 8am - 9am
9am - 5pm
Thursday 8am - 9am
9am - 5pm
Friday 8am - 9am
9am - 5pm

Website

Alerts

Be the first to know and let us send you an email when ACI Controls posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to ACI Controls:

Shortcuts

Share

Category