Tripp’s Mig & Tig

Tripp’s Mig & Tig Contact information, map and directions, contact form, opening hours, services, ratings, photos, videos and announcements from Tripp’s Mig & Tig, Metal Fabricator, Waterford Township, MI.

Spent some of the weekend fitting and welding this ford 9” to fit our personal jeep trail rig.
03/08/2026

Spent some of the weekend fitting and welding this ford 9” to fit our personal jeep trail rig.

Customer had the unfortunate incident of his clamshell snowmobile trailer come off the hitch last year and almost wore a...
11/16/2025

Customer had the unfortunate incident of his clamshell snowmobile trailer come off the hitch last year and almost wore all the way through the tongue skid plate. So, we went ahead and welded a 1/4 thick strip of aluminum to what was already existing. Nothing crazy or intricate, just more added protection. While we had the trailer we also went ahead and inspected all the welds under the trailer to check for cracked welds. This trailer is ready to hit the road once the snow starts flying!

Pretty happy with these test tubes. The tube walls are only .020 thick fuse welded to a 1/8 frame along with 1/8 thick e...
11/08/2025

Pretty happy with these test tubes. The tube walls are only .020 thick fuse welded to a 1/8 frame along with 1/8 thick end plugs. Welding such thin material at low amps definitely tested my patience, focus and steady hand.

Customer came to us with some pre cut C channel that is going to be under load so we went ahead and did a full wrap arou...
10/02/2025

Customer came to us with some pre cut C channel that is going to be under load so we went ahead and did a full wrap around weld along with some double passes

It’s been a busy summer and I’ve been doing an awful job at posting jobs we’ve done. Heres a small job but a ton of prep...
09/27/2025

It’s been a busy summer and I’ve been doing an awful job at posting jobs we’ve done. Heres a small job but a ton of prep work to fill in valve stem holes on these massive 14 wide aluminum wheels

An install picture of the sliding door we built, it’ll look great once the wood is put up!
07/27/2025

An install picture of the sliding door we built, it’ll look great once the wood is put up!

Got this barn style sliding door frame all welded up and ready to hang!
07/18/2025

Got this barn style sliding door frame all welded up and ready to hang!

Our current job we started this afternoon. This is going to be a sliding barn door for an under deck storage that’s buil...
07/03/2025

Our current job we started this afternoon. This is going to be a sliding barn door for an under deck storage that’s built into a hill. Got the outer framing cut, next is the cross braces to help with strength and a place for the customer to secure the wood planks to.

Making custom seat brackets to fit this private jet seat to fit in the factory location of the original seat on a mini b...
06/27/2025

Making custom seat brackets to fit this private jet seat to fit in the factory location of the original seat on a mini bus converted into a camper today. Due to the frame rail and the boxed in rocker pannel we didn’t want to go drilling new holes for stud to fit this seat.

Welded up this custom aluminum snorkel for our friend for his Jeep TJ, came out looking really good!
05/03/2025

Welded up this custom aluminum snorkel for our friend for his Jeep TJ, came out looking really good!

Quick little job on this Jeep bumper. Since there wasnt a factory reciver, we added a 2” receiver just for the purpose o...
04/11/2025

Quick little job on this Jeep bumper. Since there wasnt a factory reciver, we added a 2” receiver just for the purpose of being able to carry a little extra cargo. We also added 2 coats of raptor liner as a finishing touch. Once the bumper is mounted we’ll also be making a custom sized cargo carrier.

Set of 4 flush mount mounting brackets we made up, 2 are 1/2” and 2 are 3/4 thick. Drilled and tapped along with welded ...
02/05/2025

Set of 4 flush mount mounting brackets we made up, 2 are 1/2” and 2 are 3/4 thick. Drilled and tapped along with welded in the back side of the studs and ground flat.

Address

Waterford Township, MI
48327

Website

Alerts

Be the first to know and let us send you an email when Tripp’s Mig & Tig posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category