Euro Power Motorsports, 8200 Old 13 Mile Road Suite #101, Warren, MI (2026)

11/23/2025

🔥 BLACK FRIDAY – 20% OFF
A thank-you to our customers and the entire BMW community that keeps us going. 💙🤍

Because let’s be honest…
Catastrophic throttle actuator failure? Limp mode?
Yeah, that’s never fun.
DSC + EML lights, fault codes 2B15 & 2B16—we’ve all been there.

That’s why Euro Power Motorsports OEM+ Upgraded Throttle Actuators have become the #1 choice for BMW owners who want reliability done right.

💪 What You Get:
• Upgraded gears (superior materials)
• All MOSFETs replaced
• Transistors, capacitors, voltage regulators, microprocessor & serial EPROM tested or replaced
• Unlimited Miles Lifetime Warranty
• Labor Warranty up to $200 if the job ever needs redoing

This Black Friday, protect your BMW from limp mode AND save big.
🏁 20% OFF — LIMITED TIME

11/14/2025

𝐄𝐀𝐄 𝐁𝐌𝐖 𝐒𝟔𝟓 𝐁𝐢𝐥𝐥𝐞𝐭 𝐕𝐚𝐥𝐯𝐞 𝐂𝐨𝐯𝐞𝐫𝐬 — 𝐁𝐚𝐜𝐤 𝐢𝐧 𝐒𝐭𝐨𝐜𝐤
One of our most requested products is officially restocked. These billet valve covers remain one of the cleanest and most functional upgrades available for the S65 platform.

There is nothing that compares to the look and feel of true billet aluminum. The precision, the symmetry, and the beautifully machined lines make these covers stand out in a way cast parts simply cannot. Every set is CNC-machined from 6061-T6 and finished to exacting standards.

𝐖𝐡𝐲 𝐁𝐢𝐥𝐥𝐞𝐭 𝐌𝐚𝐭𝐭𝐞𝐫𝐬
OEM magnesium covers are prone to flaking, cracking, and heat-related fatigue. Billet aluminum addresses all of those weaknesses. The stability, machining accuracy, and heat resilience of 6061-T6 make this the most reliable long-term solution for the S65 engine.

𝐖𝐡𝐚𝐭’𝐬 𝐍𝐞𝐰 𝐢𝐧 𝐓𝐡𝐢𝐬 𝐔𝐩𝐝𝐚𝐭𝐞𝐝 𝐁𝐚𝐭𝐜𝐡
The updated design now supports both the factory OEM hardware and our newly developed OEM+ stainless hardware kit. The system preserves the original stopping mechanism found on OEM bolts, ensuring the gasket cannot be over-crushed.
We also removed the aging rubber grommets from the OEM setup, resulting in a cleaner installation, more consistent clamping force, and significantly improved long-term durability. For those who prefer a refined, modern appearance under the hood, the OEM+ stainless kit elevates the finish even further.

Link in Bio.

10/04/2025

𝐄𝟔𝐗 𝐌𝟓/𝐌𝟔 𝐁𝐢𝐥𝐥𝐞𝐭 𝐔𝐧𝐝𝐞𝐫𝐭𝐫𝐚𝐲𝐬 𝐀𝐫𝐞 𝐈𝐧 𝐒𝐭𝐨𝐜𝐤!

They’ve officially landed and shipping starts Monday.
If you were on the preorder list — check your email for 24-hour early access before we go public.

𝐊𝐞𝐲 𝐅𝐞𝐚𝐭𝐮𝐫𝐞𝐬:
🛠️ CNC-cut 2 mm aluminum — strong + lightweight
💨 Heat-extraction vent & debris grille
🔧 Direct bolt-on using OEM hardware
🛡️ Oil drain & filter access panels
⚙️ Satin-black powder-coat finish

Only 50 units in this batch — once they’re gone, restock will take time.

👉Link in bio. https://europowermotorsports.com/products/e64-m6-aluminum-belly-pan-engine-undertray

08/05/2025

It’s here. No more teasers — this is the real drop.
The EAE Motorsport Billet Oil Cap is officially live. CNC’d from 6061 aluminum, paired with a high-temp gasket, and locked down with our signature dowel pin system that won’t flex, leak, or loosen over time.

No leaks. No failures. Just a cap that does its job — and looks 🔥 doing it.
Black or clear. First batch is in stock. No pre-orders. No waiting.

🔗 Link in bio
🏁 Built by enthusiasts, for enthusiasts.
📦 Ready to ship now.

07/10/2025

𝗣𝗵𝗼𝘁𝗼 𝗗𝘂𝗺𝗽 —
EAE Billet Valve Covers for the S65, finished in raw aluminum and sealed with clear Cerakote.

Most coatings kill the shine — we did the opposite. These go through a multi-stage polish before being clear-coated to preserve the raw billet look while protecting against the elements.
Not just functional — these covers deserve to be seen.

𝗡𝗼𝘁𝗲 —
This batch is sold out. Next run starts August.
DM to get on the update list — no prepayments until they’re in hand. Link in bio.

07/09/2025

𝗥𝗲𝘀𝘁𝗼𝗰𝗸𝗲𝗱 𝗮𝗻𝗱 𝗕𝗲𝘁𝘁𝗲𝗿: 𝗧𝗵𝗲 𝗘𝗔𝗘 𝗘𝟵𝗫 𝗠𝟯 𝗨𝗻𝗱𝗲𝗿𝘁𝗿𝗮𝘆 𝗥𝗲𝘁𝘂𝗿𝗻𝘀 𝗮𝘁 $𝟮𝟵𝟵

Over the past few months, a lot of you have messaged asking when our E9X M3 undertray would be back. I appreciate every single DM and email — thank you for the continued support.

While it was out of stock, we took the time to revisit the design and the production process. We made key improvements — and brought the cost down.

This was always our highest-selling product, but I felt $400 was just too high. So we made a change. We now produce these in batches of 100 with our local supplier in Michigan.

𝗧𝗵𝗲 𝗻𝗲𝘄 𝗽𝗿𝗶𝗰𝗲 𝗶𝘀 $𝟮𝟵𝟵 — 𝗮 𝗳𝘂𝗹𝗹 $𝟭𝟬𝟬 𝗹𝗲𝘀𝘀 𝘁𝗵𝗮𝗻 𝗯𝗲𝗳𝗼𝗿𝗲.

And it’s not just cheaper. It’s better.

✅ 𝗙𝗶𝗻𝗶𝘀𝗵𝗲𝗱 𝗶𝗻 𝗽𝗿𝗲𝗺𝗶𝘂𝗺 𝘀𝗮𝘁𝗶𝗻 𝗯𝗹𝗮𝗰𝗸 𝗖𝗲𝗿𝗮𝗸𝗼𝘁𝗲
✅ 𝗥𝗲𝗱𝗲𝘀𝗶𝗴𝗻𝗲𝗱 𝗼𝗶𝗹 𝗰𝗼𝗼𝗹𝗲𝗿 𝗱𝘂𝗰𝘁𝗶𝗻𝗴 with enclosed sides and smoother radius
✅ 𝗕𝗿𝗮𝗸𝗲 𝗱𝘂𝗰𝘁 𝗰𝘂𝘁𝗼𝘂𝘁𝘀 for GT4-style splitter setups

We didn’t cut corners. We just cut cost — and passed the savings on to you.

All units are in stock and shipping same day.

Appreciate you all.

– Abdul
🔗 europowermotorsports.com/products/e92-m3-undertray-skid-pan

07/03/2025

𝗧𝗵𝗲𝘀𝗲 𝗷𝘂𝘀𝘁 𝗹𝗼𝗼𝗸 𝘁𝗼𝗼 𝗴𝗼𝗼𝗱 𝗻𝗼𝘁 𝘁𝗼 𝘀𝗵𝗮𝗿𝗲.

There’s something special about billet parts. Nothing matches the precision and raw elegance they bring.

I chose Cerakote for a few reasons, and one of them was this:
I wanted the machine lines on these billet valve covers to stay visible. 𝗪𝗵𝗲𝗻 𝘁𝗵𝗲 𝗰𝗿𝗮𝗳𝘁𝘀𝗺𝗮𝗻𝘀𝗵𝗶𝗽 𝘀𝗽𝗲𝗮𝗸𝘀 𝗳𝗼𝗿 𝗶𝘁𝘀𝗲𝗹𝗳, 𝘆𝗼𝘂 𝗹𝗲𝘁 𝗶𝘁.

⸻

Let me know if you’d like a version with a call to action or product tag.

06/20/2025

The updated EAE Motorsports S65 Fuel Filter Kit is here

We released the first version back in Jan 2023, right around the time we started seeing more and more S65 engines bite the dust due to stuck injectors and fuel contamination.

There was no solution on the market, so we developed one. We were the first to introduce a true post pump inline filter kit for this platform, and since then, we’ve sold hundreds worldwide.

Now, Version 2 is here with key improvements while keeping the core that worked:

✅ Sensor post housing (accurate DME readings)
✅ Improved fitting angles (easier install)
✅ Sleek, compact housing
✅ Anodized black finish

Still 100% plug and play. Still retains OEM fuel lines. Still made in the USA.

Version 1 still performs exactly as intended, but if you’re ready to upgrade, DM us for a promo code toward Version 2. Link in bio.

06/19/2025

Real gains. Real transparency.

When I first installed the headers, I didn’t get a baseline dyno. That was on me. I’m not a shop, just an enthusiast trying to build great products for this platform. So I paid out of pocket to do it right: installed the headers, removed them, went back to stock, and hit the dyno again.

📈 Stock: 440.61 WHP / 326.44 lb-ft
📈 Headers Only (No Tune): 481.28 WHP / 369.64 lb-ft
⚡️ Gains: +40 WHP / +40–45 lb-ft
(Tune coming soon — expect another 20–30 WHP)

Built in collaboration with Partee Racing x EAE Motorsports — these are true equal-length headers. The power and sound speak for themselves.

Bonus: we now have a legit header installer in Michigan. Hit me up if you need the hookup. Unbeatable price, factory-quality install.

Headers going back on next week. I can’t stand driving without them.

Abdul

05/30/2025

🚨 NOW AVAILABLE IN NORTH AMERICA! 🚨
MAHLE Motorsport Conrod Bearings – For BMW S65 (E90/E92/E93 M3)

Proud to announce that Euro Power Motorsports is now the official North American distributor for MAHLE Bearings — and these are the real deal.

🏁 Built by the same UK team behind bearings for F1, Le Mans, NASCAR, MotoGP, WRC & DTM
📏 Nominal clearance: 54µm (43–57µm range), engineered with advanced simulation software
🔩 Steel-backed, cast bronze, lead-indium VP2 overlay
💥 Laser marked – No distortion, better heat transfer, less risk

💰 Normally: $396 + $50–70 shipping + customs = $500+
At EPM: Just $360 — and they’re in stock 🇺🇸
🔗 [Link in bio] or visit: europowermotorsports.com

As an M3 & M5 owner myself, I’m excited to finally offer multiple bearing options — MAHLE, ACL, and more. Personally, I trust MAHLE or ACL for most builds — they both offer the best mix of quality, consistency, and affordability.

MAHLE just brings that next-level engineering for those who want motorsport-spec parts in their build.

05/22/2025

🚨 UPDATE: After over 2 months stuck in customs, our shipment of OEM Euro Aspherical BMW Mirrors finally landed yesterday! I didn’t want to list them until they were in-hand—and now they are. 🙌

✅ IN STOCK
✅ Group Buy Pricing
✅ No Wait Time
✅ Ships from Michigan

These are must-have upgrades for BMW owners. Wider field of view, blind spot reduction, and full support for heated + auto-dim functions. US-spec cars didn’t get these… but now you can. 💪

I worked directly with BMW Europe to bring these in bulk and pass the savings on to you.

💨 Ready to ship. Super easy install. Grab yours now 👇
🔗 [Link in bio] or visit:
👉 europowermotorsports.com

05/20/2025

They’re finally here.
After years of design, setbacks, and nonstop work, the first batch of EAE S65 Billet Valve Covers is in stock and ready to ship.
We didn’t wait around this time—we funded full production ourselves so you wouldn’t have to wait.

From the start, we chose 6061-T6 billet aluminum because nothing else compares. Stronger than cast, better than OEM magnesium, and let’s be honest—few things are as beautiful as raw machined billet. Feels wrong to hide them under the coil covers.

We went with hard anodizing (not powder coat) as the default for heat resistance, chemical durability, and perfect fit—but custom colors are available too.

🛠 Plug-and-play fitment for BMW E9X M3 (S65)
🇺🇸 Made in USA
🔒 Lifetime warranty
💥 First 20 sets sold at cost as a thank-you to the community.

It’s been a journey—and we’re proud to finally deliver.
🎥 Link in bio to the behind-the-scenes video + order page.

Euro Power Motorsports

11/23/2025

11/14/2025

10/04/2025

08/05/2025

07/10/2025

07/09/2025

07/03/2025

06/20/2025

06/19/2025

05/30/2025

05/22/2025

05/20/2025

Address

Telephone

Website

Alerts

Contact The Business

Shortcuts

Share

Category