MWI Pump Repairs

MWI Pump Repairs MWI Pumps is an American-made ISO 9001-certified pump manufacturer based in Deerfield Beach, Florida. This is our dedicated repair page!

Each pump is constructed using innovative, patented design concepts and heavy-duty materials.

Come by and see us at the FTBA Construction Conference!  We are here till 12 pm tomorrow.
02/07/2023

Come by and see us at the FTBA Construction Conference! We are here till 12 pm tomorrow.

Here is a 24" pump that was built in 1998 that's still going strong! We carried out some minor repairs and maintenance t...
11/03/2022

Here is a 24" pump that was built in 1998 that's still going strong! We carried out some minor repairs and maintenance then sent it back to the field.

10/10/2022
The little impeller that could!Here's a smaller size impeller that we are fabricating for a new 10" lineshaft pump resti...
09/15/2022

The little impeller that could!

Here's a smaller size impeller that we are fabricating for a new 10" lineshaft pump resting on an impeller for a much bigger 60" pump that we are repairing.

We work with a wide range of pump sizes to suit many different applications.

This one took some work but we got it done! The impeller of this pump was badly damaged but managed to we restored it. I...
09/01/2022

This one took some work but we got it done! The impeller of this pump was badly damaged but managed to we restored it.

It's ready get some water moving once again!

https://mwipumps.com/repair-services/

Let's take a look at some axial flow impellers that recently had some work done.
08/05/2022

Let's take a look at some axial flow impellers that recently had some work done.

Here is a pump body and it's flanged suction bell before & after being painted with an epoxy coating. These were sandbla...
07/08/2022

Here is a pump body and it's flanged suction bell before & after being painted with an epoxy coating. These were sandblasted just before painting.

This is the last thing water sees before it goes through our 36” pump with a stainless-steel impeller. Here we have anot...
07/01/2022

This is the last thing water sees before it goes through our 36” pump with a stainless-steel impeller.

Here we have another repaired unit ready to go back to our customer. This one has an intake strainer installed to help keep any solid debris from entering the pump.

At our Vero Beach facility, we can fabricate and install various pump intakes to suit many different applications.

Take a look at the before and after pictures of this pump. We conducted some internal weld repairs, replaced the seals a...
06/24/2022

Take a look at the before and after pictures of this pump. We conducted some internal weld repairs, replaced the seals and bearings and made sure the shaft is in good condition. Finally, the pump and gear drive were blasted and re-coated. All right here at our Vero Beach location!

This 42" Lineshaft pump is rated for 44,000 GPM and 6.8' of TDH.

Address

7775 SW 9th Street
Vero Beach, FL
32968

Opening Hours

Monday 7:30am - 4am
Tuesday 7:30am - 4pm
Wednesday 7:30am - 4pm
Thursday 7:30am - 4pm
Friday 7:30am - 4pm

Alerts

Be the first to know and let us send you an email when MWI Pump Repairs posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Share