Spartan Inc. Engineering Design Fabrication

30/04/2019

Chevron makes a HUGE purchase! What does this mean for the oil and gas industry?! Click the link to read more!


https://www.nytimes.com/2019/04/12/business/chevron-anadarko-petroleum.html

Chevron, the No. 2 energy producer in the United States, gains assets in shale oil drilling and liquefied natural gas by acquiring Anadarko, based in Texas.

26/04/2019

Shell announces an oil discovery deep in the Gulf of Mexico. Click the article to read more about the Blacktip oil discovery by Shell.
https://www.ogj.com/articles/2019/04/shell-partners-announce-blacktip-oil-discovery-in-deepwater-gulf-of-mexico.html

Shell Offshore Inc. announced an oil discovery at the Blacktip prospect in the deepwater US Gulf of Mexico offshore Texas. 

17/04/2019

What's going on in our shop in West Texas?
This picture displays one of our welders welding out a 24” gas line riser for new construction project south of Carlsbad,NM. The pipe sits on turning rolls and spins so that the welder can remain welding in optimal welding position.

09/04/2019

We might be new to the West Texas community, but SO happy to be part of it! Check out how Texas Tech is helping their students get hands on experience in the oilfield industry! 🤩➡️

https://www.mrt.com/business/oil/article/Texas-Tech-applies-to-drill-two-wells-at-Oilfield-13696034.php -17049904

Texas Tech University is looking to expand hands-on training for its petroleum engineering students by drilling two exploratory test wells at its Oilfield Technology Center Campus.

05/04/2019

Spartan, Inc. fabricates and delivers quality above ground FIREGUARD® storage tanks. Their secondary containment can be tested on-site!

02/04/2019

Spartan Inc. has completed prefabricating and pretesting a bottom loading fuel facility for Pago Pago, American Samoa.
It was designed to be shipped in pieces, and reassembled with little to no onsite fabrication with individual interconnecting units.
This fuel facility has 3 lanes with either, Mogas, Diesel, or Jet Fuel.
#

28/03/2019

Spartan Inc. has qualified GMAW/FCAW & GTAW welding procedures for 316L Stainless Steel and Duplex 2205 materials.
Our stand alone 1900/SqFt exotic alloy welding facility allows Spartan to weld exotic metals in a safe, clean and carbon free environment.
Request a consultation for your piping fabrication needs!

19/03/2019

Spartan Inc.’s design team has over 60 YEARS combined experience in Facilities, Pipe, Vesel, and Field Construction design, and utilize the latest software!
What design projects can we help you tackle?!

15/03/2019

Customer satisfaction is KEY!
We employ highly skilled professionals to handle ALL aspects of what we do from fabrication & design to project management & engineering.

12/03/2019

Steel fabrication is just ONE of the many products/ services we offer! Engineering & Design is a specialty of ours. CLICK the link to find out the exact engineering & design services we have to offer! ⛽️🏗⚒


https://spartaninc.net/engineering-design/

08/03/2019

08/03/2019

08/03/2019

West Texas, we are GROWING and so are WE!
We are getting our shop ready right here in Lubbock. Have you heard that we are HIRING?! Check out our JOBS tab to apply today! ⛽️🛠💪🏼
•
•

06/03/2019

Spartan Inc. has qualified GMAW/FCAW & GTAW welding procedures for 316L Stainless Steel and Duplex 2205 materials.
Our stand alone 1900/SqFt exotic alloy welding facility allows Spartan to weld exotic metals in a safe, clean and carbon free environment.

01/03/2019

Spartan Inc. is looking to hire a fabrication helper/ general labor for our Lubbock location. Please take the time to read all of duties, responsibilities, and required skills below.

JOB PURPOSE:
Perform tasks involving physical labor at our shop fabrication facility. May operate hand and power tools of all types: grinders, pneumatic tools, hand tools, power tools, overhead cranes, forklifts and a variety of other equipment and instruments. May clean and prepare pipe for assembly, teardown, and paint preparation. May assist other craft workers.

DUTIES & RESPONSIBILITIES:
• Communicating with Supervisors, Peers, or Subordinates - providing information to supervisors, co-workers, and subordinates by telephone, in written form, email, or in person.
• Performing general Physical Activities - Performing physical activities that require considerable use of your arms and legs and moving your whole body, such as climbing, lifting, balancing, walking, stooping and handling of materials.
• Handling and Moving Objects - Using hands and arms in handling, installing, positioning, and moving materials, and manipulating things.
• Inspecting Equipment, Structures or Materials - Inspecting equipment, structures, or materials to identify the cause of errors or other problems or defects.
• May be required to operate sand blast equipment (Will be required to pass a pulmonary function, hearing, and respirator test)

REQUIRED SKILLS:
• Active Listening - giving full attention to what other people are saying, taking time to understand the points being made, asking questions as appropriate, and not interrupting at inappropriate times.
• Coordination - adjusting actions in relation to others' actions.
• Operation Monitoring - watching gauges, dials, or other indicators to make sure a machine is working properly.
• Reading Comprehension - understanding written sentences and paragraphs in work related documents.
• Social Perceptiveness - being aware of others' reactions and understanding why they react as they do.

PHYSICAL REQUIREMENTS:
• Lifting/carrying objects of 50 pounds or less.
• Stooping, kneeling, walking and standing.
• Twisting upper body and squatting on uneven ground or in confined areas to gain access to pipe appurtenances fitting for inspection/repair.
• Lifting and unloading equipment and tools to different work areas within the shop.
• Ability to turn valve wrench to turn on/off valves.

01/03/2019

Spartan Inc. is looking to hire a fabrication helper/ general labor for our Lubbock location. Please take the time to read all of duties, responsibilities, and required skills below.

JOB PURPOSE:
Perform tasks involving physical labor at our shop fabrication facility. May operate hand and power tools of all types: grinders, pneumatic tools, hand tools, power tools, overhead cranes, forklifts and a variety of other equipment and instruments. May clean and prepare pipe for assembly, teardown, and paint preparation. May assist other craft workers.

DUTIES & RESPONSIBILITIES:
• Communicating with Supervisors, Peers, or Subordinates - providing information to supervisors, co-workers, and subordinates by telephone, in written form, email, or in person.
• Performing general Physical Activities - Performing physical activities that require considerable use of your arms and legs and moving your whole body, such as climbing, lifting, balancing, walking, stooping and handling of materials.
• Handling and Moving Objects - Using hands and arms in handling, installing, positioning, and moving materials, and manipulating things.
• Inspecting Equipment, Structures or Materials - Inspecting equipment, structures, or materials to identify the cause of errors or other problems or defects.
• May be required to operate sand blast equipment (Will be required to pass a pulmonary function, hearing, and respirator test)

REQUIRED SKILLS:
• Active Listening - giving full attention to what other people are saying, taking time to understand the points being made, asking questions as appropriate, and not interrupting at inappropriate times.
• Coordination - adjusting actions in relation to others' actions.
• Operation Monitoring - watching gauges, dials, or other indicators to make sure a machine is working properly.
• Reading Comprehension - understanding written sentences and paragraphs in work related documents.
• Social Perceptiveness - being aware of others' reactions and understanding why they react as they do.

PHYSICAL REQUIREMENTS:
• Lifting/carrying objects of 50 pounds or less.
• Stooping, kneeling, walking and standing.
• Twisting upper body and squatting on uneven ground or in confined areas to gain access to pipe appurtenances fitting for inspection/repair.
• Lifting and unloading equipment and tools to different work areas within the shop.
• Ability to turn valve wrench to turn on/off valves.

Please send your resume to Mike Friday at [email protected]

01/03/2019

Purpose:
Use hand-welding or flame-cutting equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products. Specifically on ASME B31.3/ B31.4 pipe, pressure vessels, and various size oil process tanks, skids, and pipe.

Duties and responsibilities:
- Weld components in 1 through 6 G positions
- Weld in accordance with structural code D1.1
- fit or assemble pipe/ fittings/ flanges for welding
- Align parts or workpieces to ensure proper assembly
- Measure dimensions of completed products or workpieces to verify conformance to specifications
- Operate safety equipment and use safe work habits
- Layout, positions, align, and secure parts and assemblies prior to assembly, using straightedges or templates to ensure conformance with specifications
- Recognize, set up, and operate hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment
- Knowledge of and ability to read and understand engineered drawings/ plans for pipe diagrams, pressure vessels, and storage tanks

REQUIRED SKILLS:
- Must pass an ASME Sect IX 6G weld test with a WIRE FEED MIG/FCAW welding process prior to hiring on
- Near vision- The ability to see details at close range (within a few feet of the observer)
- control Precision- The ability to quickly and repeatedly adjust the controls of a machine or a vehicle to exact positions
- Multilimb Coordination- The ability to coordinate two or more limbs (for example, two arms, two legs, or one leg and one arm) while sitting, standing, or lying down. It does not involve performing the activities while the body is in motion
- Problem Sensitivity- The ability to tell when something is wrong or is likely to go wrong. It does not involve solving the problem, only recognizing there is a problem

PHYSICAL REQUIREMENTS:
- Lifting/ carrying objects of 50 pounds or less
- Continuous stooping, kneeling, walking and standing throughout work shift
- Twisting upper body and squatting on uneven ground or in confined areas to gain access to pipe appurtenances and fittings for inspection/ repair
- Lifting and unloading equipment and tools to different work areas within the shop