Process Control and Engineering

Process Control and Engineering Process Control and Engineering LLC. was formed as a design firm specializing in electrical engineering services.

With a home office in Tucson, AZ, the founders of the company are professional engineers

The PLC running your line was installed before the smartphone existed.Still scanning. Still holding everything together....
06/16/2026

The PLC running your line was installed before the smartphone existed.

Still scanning. Still holding everything together.

Until the day it doesn’t — and you’re hunting for parts nobody makes anymore.

That’s not a maintenance issue. That’s a production risk sitting on your floor right now.

The fix isn’t a 2 a.m. emergency call. It’s a planned retrofit — on your schedule, on your terms, with zero surprises.

Don’t wait for the failure to make the decision for you.

👉 www.pcandengineering.com

06/13/2026

Maintenance shouldn’t mean machine down.

With Safely-Limited Speed (SLS), your team works on the machine while motion stays locked to a validated safe speed.

Faster troubleshooting. Faster setup. Faster cleaning.

Full functional safety compliance.
Safety relay + door monitoring + encoder feedback — velocity checked in real time against the safe limit, right at the servo.

Safety that works with production, not against it.

Ready to upgrade your machine safety? Let’s talk. 👉 www.pcandengineering.com

Most plants don’t have a data problem.They have a visibility problem.The team that “knows” the line is running fine is u...
06/11/2026

Most plants don’t have a data problem.

They have a visibility problem.

The team that “knows” the line is running fine is usually the one guessing the loudest. Pressure looks okay. Levels seem normal. Everyone’s busy reacting.

Then a pump fails at 2 a.m. and suddenly everyone’s an investigator.

SCADA changes that.

Not because it’s fancy software — because it turns guessing into knowing. Real numbers. Real trends. Real alarms before the failure, not after.

The plants pulling ahead aren’t working harder.

They’re working informed.

We build SCADA that earns its place on the screen — clear, actionable, and built around how your operators actually run the plant.

See what that looks like 👇
www.pcandengineering.com

The last integrator told them it couldn’t be done.So they brought it to us.That’s how most of our best projects start — ...
06/08/2026

The last integrator told them it couldn’t be done.

So they brought it to us.

That’s how most of our best projects start — with a panel someone else gave up on, a line that won’t run, a “that’s impossible” from the shop before us.

Here’s what we bring to it:

→ Siemens-certified engineers
→ UL508A panel shop
→ 13 years of seeing every failure mode there is (since 2012)

When you’ve built and troubleshot this many systems, the thing stalling your production usually isn’t new to us. It’s just Tuesday.

So if you’ve got a problem the last integrator couldn’t solve — that’s exactly the one we want.

Send it.

🔗 www.pcandengineering.com

It’s official — we’re now a Rockwell Automation Bronze System Integrator. 🎉Same team. Same obsession with keeping your o...
06/03/2026

It’s official — we’re now a Rockwell Automation Bronze System Integrator. 🎉

Same team. Same obsession with keeping your operation running. Now certified by the biggest name in automation.

Here’s what this means for you: when your line goes down, you don’t lose hours hunting for answers. You get a partner who’s backed by Rockwell, knows your systems cold, and treats your downtime like it’s our own.

Because a vendor sells you a part. A partner keeps you running.

That’s the difference. And now it’s official.
👉 www.pcandengineering.com

06/01/2026

Most plant managers think they have a “production problem.”

They don’t. They have a control problem dressed up as one.
Bottlenecks. Mystery downtime. A machine that “just does that.” That’s not normal — that’s money walking out the door.

We retrofit, reprogram, and re-engineer lines so they run the way they were supposed to from day one. PLCs, robotics, drives, safety, the whole stack.
Tell us where it hurts. We’ll tell you what it’s costing — and how to stop it.

🔗 pcandengineering.com

The plants quoting in Q4 made the call this summer. The ones “still evaluating” will watch competitors automate without ...
05/28/2026

The plants quoting in Q4 made the call this summer. The ones “still evaluating” will watch competitors automate without them.

Mid-year is the deadline nobody put on the calendar—but every capital project runs on it.

🚨 Is your plant still running “about the same as last year”?That’s the warning sign. 👇Half of 2026 is almost gone — and ...
05/26/2026

🚨 Is your plant still running “about the same as last year”?

That’s the warning sign. 👇
Half of 2026 is almost gone — and the plants taking action NOW will be quoting new business in Q4.
Everyone else? Still “evaluating options.”

Three forces are separating the plants that will own the next decade from the ones playing catch-up:

🤖 AI-Driven Robotics → predict failures before they cost you a full shift

🔗 IT/OT Convergence → your machines and business systems finally speaking the same language

🌎 Nearshoring Momentum → production closer to customers, faster ramp-ups, stronger margins

The question is simple:
Is your operation EVOLVING in 2026 — or just surviving it? 🤔
Swipe through ➡️ and drop a comment: which force is your plant prioritizing this year?

📲 Book your free operations assessment 👉 www.pcandengineering.com

This Memorial Day, Process Control & Engineering honors the brave men and women who made the ultimate sacrifice for our ...
05/25/2026

This Memorial Day, Process Control & Engineering honors the brave men and women who made the ultimate sacrifice for our freedom. Their courage and dedication inspire everything we do — engineering solutions that build a stronger future for the nation they fought to protect. 🇺🇸

Today, we remember. Today, we honor.

🚨 Stop Commissioning Blind. Start Commissioning Smart.Every hour of unplanned downtime costs more than the simulation ph...
05/20/2026

🚨 Stop Commissioning Blind. Start Commissioning Smart.

Every hour of unplanned downtime costs more than the simulation phase that could’ve prevented it.

Today’s leading manufacturers aren’t waiting until startup day to find problems.
They’re building, testing, and optimizing entire production systems virtually before a single robot moves.

With KUKA + Visual Components, manufacturers can now simulate complete robotic cells, validate throughput, optimize robot paths, and reduce risk before installation even begins.

The result?

⚡ Faster commissioning
⚡ Smarter capital deployment
⚡ Fewer production surprises
⚡ Better operator readiness
⚡ Higher long-term profitability

The most competitive facilities are already using digital twins to:

✅ Cut commissioning time by up to 40%
✅ Validate safety, ergonomics & cycle times before deployment
✅ Train operators in a virtual environment
✅ Reduce costly rework and startup delays
✅ Improve production confidence before launch

Digital twins are no longer optional.
They’re becoming the competitive advantage separating reactive plants from engineered systems built to scale.

The question isn’t if your operation adopts this technology.
It’s how much efficiency, uptime, and margin you’re losing until it does.

⚙️ Automation 2.0. Engineered to Perform.

📍 Discover how Process Control & Engineering (PC&E) is helping manufacturers across North America deploy smarter, faster, leaner automation systems.

Address

3538N. ROMERO Road, STE 118
Tucson, AZ
85705

Opening Hours

Monday 8am - 5pm
Tuesday 8am - 5pm
Wednesday 8am - 5pm
Thursday 8am - 5pm
Friday 8am - 5pm

Telephone

+15208496021

Website

Alerts

Be the first to know and let us send you an email when Process Control and Engineering posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Process Control and Engineering:

Shortcuts

Share

Category