Vance Manufacturing

Vance Manufacturing Located in Taft, Tennessee we are here because of you and your demand for high quality U.S. manufactured products! www.vancemfg.com

From our Vance family to yours, have a peaceful and blessed Memorial Day. ๐Ÿ‡บ๐Ÿ‡ธ
05/25/2026

From our Vance family to yours, have a peaceful and blessed Memorial Day. ๐Ÿ‡บ๐Ÿ‡ธ

From our Vance family to yours, have a blessed and peaceful Memorial Day. ๐Ÿ‡บ๐Ÿ‡ธ
05/25/2026

From our Vance family to yours, have a blessed and peaceful Memorial Day. ๐Ÿ‡บ๐Ÿ‡ธ

๐Ÿ“ฃCalling all Vance Mfg customers, we want to see your boats rocking our jack plates, DM us and let's get you featured!  ...
05/06/2026

๐Ÿ“ฃCalling all Vance Mfg customers, we want to see your boats rocking our jack plates, DM us and let's get you featured!

05/03/2026

๐Ÿšจ๐Ÿ”ฅCUSTOMER BUILD
SPOTLIGHT๐Ÿ”ฅ๐Ÿšจ

Huge shoutout to Chase Ross out of Henderson, TN for trusting 731 Outdoors with this full custom setup ๐Ÿ‘Š๐Ÿ‡บ๐Ÿ‡ธ๐Ÿค™

This one came together RIGHT the way it should. Chase rolled out with a fully custom 1756 Alweld Marsh Tiller powered by a 60 HP Tohatsu sitting strong on a Vance Kick Plate ๐Ÿ’ช

And he didnโ€™t stop thereโ€ฆ

He wanted custom SeaDek and we made it happen so this rig is as clean and comfortable as it is tough on the water ๐Ÿ˜Ž

We also stepped it up on the electronics and power package:

โœ… Lowrance GHOST trolling motor
โœ… Interstate battery setup
โœ… 36V lithium battery system
โœ… 36V onboard charger

Other upgrades included:
๐Ÿ”ฅ Upgraded 15 gallon fuel tank
๐Ÿ”ฅ Spare tire mount and spare tire

All of it riding on a beautiful Tennessee I-Beam trailer built to haul it all with confidence ๐Ÿ‘Š

Chase, we appreciate you big time for the business and for letting us put this one together for you. Enjoy that rig and make some memories on the water ๐Ÿ‡บ๐Ÿ‡ธ๐Ÿค™

At 731 Outdoors, we donโ€™t just sell boatsโ€ฆ we build setups that fit YOU ๐Ÿ’ฏ๐Ÿ”ฅ

๐Ÿ‘Š๐Ÿ‡บ๐Ÿ‡ธ๐Ÿค™



Alweld Boats
Vance Manufacturing
Yamaha Outboards
SeaDek

We would like to wish our dealer rep Whitney Thornton a Happy Birthday! Hope you have a great day!
03/10/2026

We would like to wish our dealer rep Whitney Thornton a Happy Birthday! Hope you have a great day!

Our Vance Family has grown this week! Please help us welcome to the world this precious girl Emily Emerald Vance! ๐Ÿ’• Born...
03/04/2026

Our Vance Family has grown this week! Please help us welcome to the world this precious girl Emily Emerald Vance! ๐Ÿ’•
Born March 1st. Congratulations to our wonderful Vance Mfg owner Edward and wife Joyce Vance!

Ever wonder if a jack plate is right for your boat? Meet the JPL 9638! ๐ŸšคThe jack plate is designed to swivel on the rugg...
02/23/2026

Ever wonder if a jack plate is right for your boat?
Meet the JPL 9638! ๐Ÿšค

The jack plate is designed to swivel on the rugged stainless steel shaft in case of an obstacle such as a stump or rock while carefully trolling back to the hotspots your buddies can't reach!

Simply tighten the side swivels to desired setting for your rig size and you are protected from a potential lower unit or prop BOO-BOO! Also included are two safety cables to prevent overtravel swiveling of engine when an obstruction is encountered.

Tightness is determined by engine reverse requirement. The larger the engine, the tighter the swivels for preventing flip-up during reverse.

This is the only Kick-Up plate manufactured by any manufacturer that has vertical travel similar to a jack plate as well as the kick up function in the case of hitting a log, stump or earth below.

No springs to break and no replacement parts necessary as the JPL9638 is made of aircraft quality aluminum and 3/8 stainless steel chain, grade 316!

Proudly manufactured and assembled
100% in the USA ๐Ÿ‡บ๐Ÿ‡ธ

This particular plate is rated for outboard motors up to max 60 H.P.

Go to our website www.vancemfg.com to check it out!

Vance Manufacturing

02/23/2026
02/23/2026

Repost from ๐Ÿ˜Ž

Warmest greetings of the Holiday season. Our family extends heartfelt wishes to yours for a very Merry Christmas and Hap...
12/23/2025

Warmest greetings of the Holiday season. Our family extends heartfelt wishes to yours for a very Merry Christmas and Happy New Year. In honor of the Christmas season, our office will be closed December 25th through January 5th. During this time, we will not process shipments or attend to technical issues and phone calls, which will be forwarded to voicemail. As the year draws to a close, what reflections do you have on the true meaning of Christmas with your family and loved ones?

08/21/2025

by Robert Youens

Address

1266 Ardmore Highway
Taft, TN
38488

Opening Hours

Monday 8am - 5pm
Tuesday 8am - 5pm
Wednesday 8am - 5pm
Thursday 8am - 5pm
Friday 8am - 5pm

Telephone

(931) 425-6820

Alerts

Be the first to know and let us send you an email when Vance Manufacturing posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Vance Manufacturing:

Share