KIPP USA

KIPP USA KIPP Inc. is the North American distribution center for KIPP. Setting industry standards for clampin

With more than 100 years of manufacturing and engineering experience, KIPP sets the standard for quality and innovation in clamping tools, standard components, and operating parts. Our roots are in the Black Forest region of Germany, where we continue to design and manufacture KIPP products. Our North American office and distribution facility in Stevensville, Michigan, carries over 25,000 items fo

r customers in the USA, Canada, and Mexico. Inch or metric, standard or custom, you can trust in KIPP to deliver durable, consistently available components. As a family-owned and managed company, we are committed to continuing the KIPP tradition of excellence by delivering an ever-increasing range of dependable, high quality products. Specialties:

Adjustable Handles, Cam Levers, Stainless Steel Handles, Index Plungers, Spring Plungers, Handwheels, Pull Handles, Knobs, Novo Grip, Leveling Pads, Toggle Clamps, Ball Lock Pins, Locating Components, Latches

www.kippusa.com



Industry:

Wholesale


Type:

Privately Held


Company Size:

201-500 employees


Founded:

1919

02/23/2022

Screwing down long threads until the grip finally reaches the desired position?
Thanks to the K0156 from , this problem belongs in the past.

The special of the hole enables the to slide down the threads of rod, , etc. The star grip is simply slipped on at an angle and anywhere on the thread.

When the grip is straightened up, the threads of the grip and male thread interlock. Now the position can only be changed by turning the grip - sliding it back and forth is no longer possible.

This extraordinary star grip from saves a lot of time and fixation enormously. Find all thread sizes, dimensions and other information in our webshop: ▶ https://bit.ly/3BKJfjJ

🎥 More product videos: https://www.youtube.com/c/KIPPinternational/videos

02/11/2022

Profile connectors for rapid construction: connecting sets & butt connector sets 🔧

The basis of the profile connectors are screws which fit into the of the aluminium profiles. The connectors of the connecting sets K1036 have threads which enable direct screwing into the - without having to machine anything beforehand. 👍

The cap screw is pushed through the connector and the key can simply be screwed onto the screw. The profiles are then joined together at a right and can be freely positioned. Optimum of the forces is achieved by a incorporated into the slot key which makes the even more .

The butt connector sets K1041 are suitable for in-line connecting or profiles. Cap screws, which are fitted into the slots, also serve as the basis here. These connectors also have a self-tapping , so they can be rapidly screwed into the profile, using only a . Female in the connectors provide the necessary hold for the screws and ensure a reliable connection.🤝

Order online now!
▶ Connecting set automatic Type I K1036:
https://bit.ly/3LnmFCi

▶ Butt connector set automatic Type I K1041:
https://bit.ly/3681CUf

🎥 More product videos: https://www.youtube.com/c/KIPPinternational/videos

01/31/2022

is characterised by without protruding edges. Augmented by in the lower opening of the mushroom k**b on the indexing plunger as well as on the washer. This means that there are no cavities where or can collect.

The sealing washer is placed between the and the plunger before the plunger is screwed in. It ensures that nothing can get into the hole. Hygienic DESIGN enables to be very easily removed and the indexing plunger to be cleaned.

The seals do not restrict . The principle is similar to the standard versions.

The at a glance:
▶ For use in areas
▶ Very to
▶ to use

All about the : https://www.kipp.com/gb/en/Products/Operating-parts-standard-elements/Spring-plungers-indexing-plungers-ball-lock-pins/Indexing-plunger/Indexing-plungers-with-collar-for-Hygienic-USIT%C2%AE-seal-and-shim-washers.html

🎬 More product videos: https://www.youtube.com/c/KIPPinternational/videos

01/19/2022

The includes a wide selection of different indexing plungers. They are characterised by different methods such as pulling, pressing, remote operation or even . This depends on the model. These different actuation methods enable the integration of KIPP indexing plungers into a wide variety of . The actuation methods available are:

▶ Standard indexing plungers K0338
These indexing plungers are operated in the way. The retracts when the operator pulls the k**b. When the k**b is released, the pin advances again and locks the application.

▶ Indexing plungers with cam lever K1584
These indexing plungers have a lever on . With this, the pin can be quickly and easily retracted or advanced using just one . When the cam lever is moved past the dead centre, it stays there and the pin remains retracted. When the cam lever is moved back, the pin advances and the indexing plunger is locked.

▶ Indexing plunger with remote actuation K1502
Indexing plungers with actuation are used on that cannot be operated directly at the location. A cable is located between the and the pin. The cable enables operation from a safe , for example outside the zone of parts or cages.

▶ Pneumatic indexing plungers K1116
type indexing plungers are suitable for the inclusion in plants. When compressed air is applied, the pin advances and locks the application. When the air supply is interrupted, an retracts the pin and releases the lock.

All about the is available on our :
https://www.kipp.com/gb/en/Products/Operating-parts-standard-elements/Spring-plungers-indexing-plungers-ball-lock-pins/Indexing-plunger.html

🎬 More product videos: https://www.youtube.com/c/KIPPinternational/videos

With our greetings we send our sincere thanks for the trusting cooperation, the strong cohesion and the joint successe...
12/25/2021

With our greetings we send our sincere thanks for the trusting cooperation, the strong cohesion and the joint successes in these special times.

We wish you a 🎄 and an optimistic start into a promising new year.🎀

11/16/2021

Sudden movements or vibrations can cause conventional mechanisms to open unintentionally. locks prevent unintentional and ensure secure . 🔒

The -in snap locks from are optimal where space is limited and can be installed without tools.

and :
1️⃣ Produce a burr-free mounting cutout as shown in the drawing
2️⃣ Insert the lock into the cutout from the front and push forwards.
3️⃣ Press the lock down to clip in
4️⃣ When the grip is pressed down, the snap lock latch retracts and the door can be opened
5️⃣ The door latches automatically when it is pushed to

All and for the :
▶ https://www.kipp.com/gb/en/Products/Operating-parts-standard-elements/Latches-snap-locks-slam-latches/Snap-locks/Plastic-snap-in-snap-locks-with-grip.html

🎬 More product videos: https://www.youtube.com/c/KIPPinternational/videos

Thank you to Dave Rowlands for using products in this impressive camera project! 🔩🤝
11/02/2021

Thank you to Dave Rowlands for using products in this impressive camera project! 🔩🤝

10/26/2021

The locks are designed for flush installation in doors, hatches and hoods. The snap lock K1654 has a twist k**b which provides additional security. 🤝

:
1️⃣ Produce a mounting cutout as shown in the drawing
2️⃣ Mount the catch plate with two screws
3️⃣ Secure the lock using the mounting nut
4️⃣ K1653: Press the grip shortly → Pull on the grip to open the door
5️⃣ K1654: Press the grip shortly → Twist the grip right or left to retract the latch and open the door
6️⃣ The door latches automatically when pushed to
7️⃣ Press the k**b in to make it flush with the housing again

▶ Snap lock K1653:
https://www.kipp.com/gb/en/Products/Operating-parts-standard-elements/Latches-snap-locks-slam-latches/Snap-locks/Snap-locks-plastic-with-k**b.html

▶ Snap lock K1654 twist k**b:
https://www.kipp.com/gb/en/Products/Operating-parts-standard-elements/Latches-snap-locks-slam-latches/Snap-locks/Snap-locks-plastic-with-twist-k**b.html

🎬 More product videos: https://www.youtube.com/c/KIPPinternational/videos

10/12/2021

Secure and : Snap locks with folding grip

Easy to use:
1️⃣ Produce a mounting cutout as shown in the drawing.
2️⃣ Secure the grip to the door leaf with two screws → The grip is pre-tensioned and so prevents rattling when or .
3️⃣ Mount the catch plate on the door frame using two screws
4️⃣ Pull on the grip to open the door
5️⃣ The door latches automatically when it is pushed shut

Snap locks are ideal for all where it should be ensured that e.g. , and can be quickly and securely closed.

▶ Find out more: https://www.kippusa.com/us/en/Products/Latches-snap-locks-slam-latches/Snap-locks/Snap-locks-plastic-with-grip-folding.html

🎬 More product videos: https://www.youtube.com/c/KIPPinternational/videos

From today to Sunday we are exhibiting at Cine Gear Expo in Los Angeles, CA. 🔩We are happy to welcome you at BOOTH 320! ...
09/23/2021

From today to Sunday we are exhibiting at Cine Gear Expo in Los Angeles, CA. 🔩

We are happy to welcome you at BOOTH 320!

Address

4305 N Roosevelt Road
Stevensville, MI
49127

Opening Hours

Monday 8am - 5pm
Tuesday 8am - 5pm
Wednesday 8am - 5pm
Thursday 8am - 5pm
Friday 8am - 3pm

Website

Alerts

Be the first to know and let us send you an email when KIPP USA posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to KIPP USA:

Shortcuts

Share

Category