Backcountry Mobile Welding LLC

Backcountry Mobile Welding LLC We are a mobile welding service focused on Steamboat Springs, CO and surrounding areas. We also offer aluminum welding and repair

Services include aluminum, repairs, replications, custom fab, installations and more. Emergency 24/7 welding related truck repair (price dependent upon hour of day)

Built a vertical steel storage for the shop.  Only cost about $60 for the rebar, had everything else laying around.  Sur...
06/07/2022

Built a vertical steel storage for the shop. Only cost about $60 for the rebar, had everything else laying around. Sure helps with the 5’ - 10’ pieces. All smaller pieces on the bottom shelf.

Working with a company that wants to swap all their trailers from ball hitches over to pintles.  Here are photos of the ...
05/30/2022

Working with a company that wants to swap all their trailers from ball hitches over to pintles. Here are photos of the first one…came out pretty nice! 👨🏻‍🏭🗜🔧⚒️🛠

Did a clean up and refurb on this T300…upgraded to led lights, powder coated rear door, touched up white paint, fixed wi...
05/13/2022

Did a clean up and refurb on this T300…upgraded to led lights, powder coated rear door, touched up white paint, fixed wiring issues, pulled cab to paint, cleaned out tub of machine, new old school decals, cleaned all interior parts before re-install. Not a welding job but pretty satisfying.

***WE ARE NOW OFFERING TRAILER SERVICE***
•Lights
•Brakes
•Bearings
•Axles
•Weld repairs
•Upgrades

Here are photos of a snow plow that we refurbished.  Needed new hydraulic hoses, blade was bent and cracked in multiple ...
04/26/2022

Here are photos of a snow plow that we refurbished. Needed new hydraulic hoses, blade was bent and cracked in multiple places…the bolts were loose on the plow plates at the bottom of blade and were the cause of most of the damage. Went through and made all right again. Cool little project!

***We are now offering trailer repair***
•bearings
•brakes
•lighting
•weld repair
•upgrades

Worked on a Chevy C5500 (Kodak) for a customer did a bunch of paint, 14,000 # hitch receiver, brake controller, 6 way pl...
04/23/2022

Worked on a Chevy C5500 (Kodak) for a customer did a bunch of paint, 14,000 # hitch receiver, brake controller, 6 way plug, custom bow tie, swapped all lights for LED. Cool job, even cooler customer 😎.

Had a customer bring me their trailer to fix the hinges on the door.  I ended up having to move the trailer to a differe...
03/07/2022

Had a customer bring me their trailer to fix the hinges on the door. I ended up having to move the trailer to a different spot in the shop and noticed that the passenger side wheel bearings were not okay…this is what I found when I opened up the hub. Yikes 😬 the customer informed me that the bearings had all been replaced within the last year or so…both passenger axle nuts had almost worked their way off. There was at least 4” of play on both tires because the outer bearing on both had all but disintegrated. The proper torque had not been applied to seat the bearings and wheel seals. Luckily the spindles were not damaged and we were able to just replace the bearings, cups, and seals. We also torqued the axle nuts on the other side just to make sure.
***We are now offering trailer repair***

Built these posts for a handrail.  Still working on the panels…this customer wanted 1” thick caps I was skeptical but th...
03/03/2022

Built these posts for a handrail. Still working on the panels…this customer wanted 1” thick caps I was skeptical but they came out nice. ***On a side note we are now offering trailer repair*** please let anyone you know that has a trailer in need of repair. Thank you all for your support!

Here  are two separate stairs finished for the same contractor.  The last four pics are from a separate house that only ...
12/23/2021

Here are two separate stairs finished for the same contractor. The last four pics are from a separate house that only needed a wrap a round handrail.

Some cable rail from Backcountry Mobile to you and yours…Merry Christmas 🎄
12/23/2021

Some cable rail from Backcountry Mobile to you and yours…Merry Christmas 🎄

Here is a stair rail in progress.  Most of it is finished…just need to add fourhandrails to get it up to code.  Also so...
11/02/2021

Here is a stair rail in progress. Most of it is finished…just need to add fourhandrails to get it up to code. Also some extra clean add-ons. Will post video upon completion.

Had a customer call wanting to hang a Priest Creek lift chair.  She had a good idea of how she wanted it built.  We ende...
11/02/2021

Had a customer call wanting to hang a Priest Creek lift chair. She had a good idea of how she wanted it built. We ended up running 1’ piece of 1 1/2” solid round stock through a piece of 2”x2”x1/4” wall square tubing to mimic the chair hanging on the original cable. This is the piece at the peak of the two a-frames. This thing turned out awesome! Lee if you see this post please weigh in. 👌

The view from my office…looking to hire someone 970-291-7005
09/30/2021

The view from my office…looking to hire someone 970-291-7005

Address

Steamboat Springs, CO
80487

Opening Hours

Monday 7am - 7pm
Tuesday 7am - 7pm
Wednesday 7am - 7pm
Thursday 7am - 7pm
Friday 7am - 7pm

Telephone

+19702917005

Alerts

Be the first to know and let us send you an email when Backcountry Mobile Welding LLC posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Backcountry Mobile Welding LLC:

Share