04/07/2022
Tractor / Zero-Turn Complete Service ($175-200 depending on filters needed, plus pickup and delivery charges)
Hour meter: _____ Mech. Initials: _____ Start time: ______
__Confirm/add model/serial #’s above. __ Pull parts per list. Advise shorts. (Interruptions (mins): _____, _____)
__Chk blower housg, other areas--Find MOUSE NESTS?--circle YES / NO. (If yes, VAC, SANITIZE, & TREAT ___ )
__Check oil to warm eng. (Added ______qt(s).) Circle quality: OK / dark brown / black Level: OK / low / very-low
__Check elec-start—yes /no. (If not working: __Check-batt-&-charge:____/12.5) Battery date (m/yy) ____ /____.
__If still... check fuel quality, __ Flush bad fuel, and __ Empty carburetor bowl and clean.
__If still won't start, check spark ( yes / no ). __Check compression right _____ and left _______
New oil: ___ qts., Type: _________, Filter: _______ __Check other fluids (hydro-, coolant,...)
New spark plug(s), Qty: __, Part #: ________ __Check fasteners, hinges
New air-/pre-filters: ___________ / ___________ __Check gov & carb (throttle, choke & stop)
New fuel filter: ____________
__Check DRIVE belts, guides, pulleys, & springs. __Check DECK belts, guides, pulleys, & spindles.
__Check steering/handles,... __Check cables, switches, wiring. __Check wheel bushings, axles, etc.
__Check grass chute. __Scrape deck-bottom. __Check blades straight. Repl. _______ ( )
__Cleanup sharpener area. __Clean deck-top (degreaser) __Sharpen & reattach blades (qty __ )
__Use 1072-clean battery. __Use 1073-protect batt. __Lubricate deck & chassis at zerk-fittings.
__Clean machine w/vacuum brush & nozzle. __Recheck tire pressures against (above psi).
__Check for LEAKS, CRACKS ( __valve cvr., __ oil pan, __ crankshft, __ hydro, __ carb., __ fuel cap, __ -lines, etc.)
__Review and complete any special instructions at top of list. ____________________________________________
__Test mower. (_ starts, _ runs, _ doesn't surge, _ drives, _ blades stop as expected, _ engine stops as expected.)
__Clean workstation. __ PUT AWAY TOOLS. Use lines below to list parts or notes (Part #,Brief Description, Qty)
____________________________________________ ____________________________________________
__If done, move machine to finished area. __Place work order in box. Stop-time: ______