Race-Crafters

Race-Crafters Custom metal fabrication Welcome to the Hodges Racing Fabrication page. No job is to small!

My shop is designed to acheive any custom metal fabrication project that is desired. I have surrounded myself with the best tools and equipment to build your project right the first time to its maximum potential. I have been welding for over 10 years and have been involved in motorsports my whole life. I specialize in general welding (tig/mig of chromoly, aluminum, stainless steel, titanium, ext.)

, complete chassis fabrication (dragsters/door cars/sprint cars/midgets/ ext.), waterjet cutting and sheet metal fabrication. The quality in my work is apparent from my welds to my custom waterjet parts. If you have a racecar or project you want built right, give me a call - I'd love to help

It’s amazing if you zoom in and look at all the components custom built, machined and or welded to get this thing down t...
11/11/2023

It’s amazing if you zoom in and look at all the components custom built, machined and or welded to get this thing down the track at 330mph.

We are looking for a full time team member to work within our race team and on the LaserworX side of the company. Dm if...
04/13/2023

We are looking for a full time team member to work within our race team and on the LaserworX side of the company. Dm if interested.

Took the wing car out for a spin… hold the throttle wide open and keep the wheel straight they said… sounds so easy does...
09/22/2022

Took the wing car out for a spin… hold the throttle wide open and keep the wheel straight they said… sounds so easy doesn’t it 🙄

Sums it all up in one picture… Family, business and fun!
09/22/2022

Sums it all up in one picture… Family, business and fun!

Another front clip in the books… we don’t do these very often but if we have the time between production jobs we will sq...
06/30/2022

Another front clip in the books… we don’t do these very often but if we have the time between production jobs we will squeeze it in. This particular chassis was built with very thin wall tube (049,058,083) allowing it to flex more than normal with the thought of gaining a performance advantage, the problem is any sort of light contact can make for extensive damage… the driver had this car out for the first time,hit a rut at a bad angle causing him to flip…this flip was very light, light enough that normally you could get rolled back over and get going again… well not on this chassis… the lower frame rails were buckled over 8” and the entire front end was bent upwards about 6” 😳… took a little effort but things are straight again and about ready for assembly.

Super excited about the new bullet for our wing car. Thanks to Shark Racing Engines and for making this possible.
06/17/2022

Super excited about the new bullet for our wing car. Thanks to Shark Racing Engines and for making this possible.

invade today. Pretty cool shot of our 360.
02/26/2022

invade today. Pretty cool shot of our 360.

Definitely one of the coolest pictures from the most recent . There’s nothing like stepping on the loud pedal of a 410 ...
02/22/2022

Definitely one of the coolest pictures from the most recent . There’s nothing like stepping on the loud pedal of a 410 sprint car!

02/09/2022

Father daughter date to the coliseum to watch the clash and root on our driver rip it up. did a great job with this event, looking forward to the next one!

Back to our roots with this project. We took on some fabrication work on a top sportsman corvette drag car last week fo...
01/19/2022

Back to our roots with this project. We took on some fabrication work on a top sportsman corvette drag car last week for the first time in years. Our team did a great job building and installing a new 3.5 gallon fuel cell, installing a new radiator and running new Brown and Miller light weight plumbing. Very happy with the result.

Super stoked on how our new to us 410 turned out… took months to build but all in all I’m happy with how it turned out. ...
12/03/2021

Super stoked on how our new to us 410 turned out… took months to build but all in all I’m happy with how it turned out. It started off as a simple frame repair which turned out not so simple, the chassis needed a rear clip… then a front clip… then body mount…. Then more tube replacement… ugh should of bought a new one but was in too deep at this point. Once the chassis was ready to start bolting on parts that’s when it started to get tough. Building these sprint cars are very simple, you open a catalog, purchase a part and bolt it on, no custom fab required…. So I thought! Turns out it’s not so simple… I think I bought every part about three times to make it right, yes the first time around could of worked but when your a perfectionist could of is not good quite enough. For example I bought a ti bolt kit (not cheap fyi), contains every nut/bolt for the car and plug and play right? Nope! Most of the bolts need trimming 🙄. Any how, she’s the best she will look and ready to go sling some dirt!

11/04/2021

Lots of tubing being processed on the daily. If you need parts cut and welded shoot us an RFQ

Address

Simi Valley, CA
93065

Opening Hours

Monday 8am - 6pm
Tuesday 8am - 6pm
Wednesday 8am - 6pm
Thursday 8am - 6pm
Friday 8am - 6pm
Saturday 8am - 6pm
Sunday 8am - 2pm

Telephone

+18052179436

Website

Alerts

Be the first to know and let us send you an email when Race-Crafters posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share