Acme Auto Parts

Call Directions Website

Acme Auto Parts North Texas and Southern Oklahoma's source for quality parts and friendly service since 1964.

Welcome to the Acme page, the home of Acme Auto Parts, hydraulic line and cylinder repair, and machine shop. Since 1964, we have served Sherman and the greater North Texas and Southern Oklahoma area with quality auto parts, machine work, hydraulic hoses, and, above all, friendly knowledgeable service.

10/22/2026

THREAD THURSDAY: Metric edition! Here's a look at cutting the threads in a fresh hydraulic cylinder gland that will replace the original that was damaged. A quick test fit with the barrel confirms the threads are happy, and it's time to move on to machining the inside based on the original spec.

Hydraulic problems? We can help! Give us a call at 903-893-8121 or stop by and see us in downtown Sherman!

10/20/2026

⚠️ NO REPLACEMENT.. for displacement! This 350 block got some extra cubes with a 383 stroker crank, which added the step of clearancing for the rods to our normal process. After decking the gasket surfaces, finish honing in our Rottler CNC hone, and final prep and cleaning, this one is ready for assembly.

Whether you're building a hot rod, cruiser, tractor, forklift, or something in-between, we can get you rolling! Give us a call at 903-893-8121 or stop by and see us in downtown Sherman.

10/15/2026

Cylinder Wear - can you actually SEE it? You sure can, and our Rottler CNC hone shows it perfectly on this 90s Chevy 350. After the first few thousandths have been machined, the ring wear pattern is obvious, and you can see it disappear in the time lapse. This one is getting a new lease on life in a '57 Chevy Bel Air that will be cruising the highways soon!

Building a hot rod? Give us a call at 903-893-8121 or stop by and see us in downtown Sherman to see how we can help!

10/12/2026

Brakes. BRAKES. BRRRAAKKEEESS! Rusty old brake lines can be a real pain, but we can help with brand new replacement hardlines and rubber lines to match the factory equipment. Looking for more performance? We also stock a full line of stainless steel braided hose and fittings that are ideal for racing, off-road, and much more.

Let us help get your project rolling - and stopping! Give us a call at 903-893-8121 or stop by and see us in downtown Sherman!

10/09/2026

Sometimes you need the BIG impact. This is the last step we take before moving to our hydraulic wrench, affectionately known as the 'Nut-Buster'. The nut in this one had been doused with thread locker when it was assembled previously, meaning it was time for the 1" impact to break it loose.

Got hydraulic problems? We can help! Give us a call at 903-893-8121 or stop by and see us in downtown Sherman!

10/06/2026

An engine block goes through a lot in its lifetime. Between the torque of the head bolts and the continual cycles from ambient temp to hundreds of degrees and back again, the head gasket surfaces become distorted over time. All of this is even more true when the block is aluminum.

When you're doing a rebuild, machining these surfaces back true in our high speed mill helps to ensure proper gasket seal and long-lasting reliability.

What are you working on? Give us a call at 903-893-8121 or stop by and see us in downtown Sherman to see how we can help!

10/01/2026

Got a long cylinder? Like, a really π’π’π’π’π’π’ˆ cylinder? We can handle that! This double-sided setup checks in at over 30 feet long fully extended out of both ends 😲 We got it torn down, cleaned up, and re-sealed so it can get back to work.

From long to short, small to large, we've got you covered for hydraulic cylinder repair. Give us a call at 903-893-8121 to see how we can help!

09/28/2026

🏍️ What's a Ural?! What began in the 1940s as a military utility sidecar motorcycle has continued into modern times in largely the same form with a dedicated following around the world. These jugs are from a 1990's 750 model, and we honed them to oversize to get it back up and running like new.

Whether project's got 2 wheels, 4 wheels, or even more, we can help! Give us a call at 903-893-8121 or stop by and see us in downtown Sherman!

09/25/2026

We love long walks on the beach and the shine of freshly machined aluminum. This Duramax head is ready to go back together and hit the road again after some quality time in our high-speed mill.

What are you working on? Give us a call at 903-893-8121 or stop by and see us in downtown Sherman to see how we can help!

09/22/2026

We can fix 𝙖𝙑𝙒𝙀𝙨𝙩 anything - key word being almost. This excavator thumb cylinder came in partially retracted, hiding the true extent of the bend until after it was extended. After a lot of work to get it apart, we found that the gland, piston, and barrel were all heavily damaged, making this one a better candidate for replacement rather than re-machining new parts.

Sometimes you don't know til you dig in and investigate, and in this case it was worth a few hours of labor for the customer to see what they had before moving on to finding a new cylinder.

What are you working on? Give us a call at 903-893-8121 or stop by and see us in downtown Sherman!

Address

219 E Pecan Street
Sherman, TX
75090

Opening Hours

Monday 8am - 5:30pm
Tuesday 8am - 5:30pm
Wednesday 8am - 5:30pm
Thursday 8am - 5:30pm
Friday 8am - 5:30pm
Saturday 8am - 12pm

Telephone

(903) 893-8121

Website

Alerts

Be the first to know and let us send you an email when Acme Auto Parts posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category