Fast Lane Fabrication & Trailer Sales

10/21/2026

I’m making a few walking targets for target practice. Let me know if you’re interested in one or more. $25 each.

10/11/2026

Well now that it’s been publicized, I have to share a job I did for a longtime friend of mine. I’m glad he came to me and asked if I thought I could build a project for him. I’ve never done anything like this before, but I felt like I could build him what he wanted and do it well enough that he would be happy with it. So I accepted the challenge! Dean Bitner and his wife Tracey wanted an archway over their driveway leading into their new home/hot rod shop. Dean and Tracey gave me the width they wanted it to be, what they wanted it to say, and the size of the poles it would rest on. We tossed ideas back and forth and this was the result. I believe they both were very happy with the results. 😊

09/17/2026

08/30/2026

Out with the old and in with the new…

08/09/2026

Well I’ve been working on a BIG project for a great friend of mine. This project is just over 20’ long and stands over 5’ in the middle. I’ve never done anything like this before, but after it is all wire brushed and painted, I think it will look good. Can’t wait to see it over his driveway! Pictures will come once I get some good photos of it!

08/05/2026

Another project going to the east coast!

07/23/2026

Well I told you my trailers were going up, and sure enough, they went up! However, if you compare my trailers to other builders, I think you will notice 2”x2” square tubing in the gate on the utility models vs angle iron that’s used on most, also they have true 8ply tires, 10 ply on the trailers with heavier axles, and the channel iron used on the tongue vs angle iron that other manufacturers use. I still believe we have a very nice trailer for the money.

83” between the fenders, 14’ long bed, removable rear gate that’s reinforced, 7k tongue jack, with 3500 # axles with grease-able hubs for $2400.

83”x14’ tandem axle with one brake axle, with all the items mentioned above only with a 4” channel steel tongue instead of the 3” on the single axle for $2975. First four pictures are the single axle and the next four are the tandem axle.

Spares are $125 if interested.

07/19/2026

Well, my trailer prices are going up. 😔 I had most everyone else beat on pricing around me and it was what kept me going. I hear everyone else is going up as well, so maybe it won’t be as bad as I think it will be? 🤞🏻I have built a very good customer base and everyone seems to like the trailers they’ve purchased from me, so hopefully that will help. I just wanted to give everyone a heads up. Metal prices have went up a lot, and it’s effecting my fabrication side of the business as well. It’s hot out there, stay hydrated and take breaks if you are working out in the heat! ~Dean

06/26/2026

I also picked up a 76”x14’ dovetail and a 83”x14’ dovetail, both single axle trailers this morning as well. Let me know if I can help you get a trailer that fits your needs! Thanks!

06/02/2026

I have 3 trailers I just got in that I’ll be listing soon on Marketplace. Be sure to check them out if you are in the market for one! Thanks!

76”x14’ single axle utility
$1950

83”x16’ utility with brakes and a wrapped tongue
$2,950

82”x 16’+6’ Hillcrest tilt bed with 7k axles, brakes on both, and 235/80R16 tires. GVWR 15,400
$7,300