onsemi

09/08/2026

Humanoid robots need cooler, more efficient motor drives. SiC MOSFETs need the right gate drivers.

This month, onsemi is hosting two webinars to help engineers tackle both. Don’t miss these opportunities to level up your knowledge with onsemi experts:

🤖 Increase Power and Thermal Efficiencies in Robotics and Industrial Motor Drives

Learn how to reduce power losses, improve thermal performance and increase power density in demanding robotics and industrial motor drive designs. Led by Patil, the session will explore practical ways to balance efficiency, heat and power density as robotic systems become more compact and capable.

📅 September 10 | 1:00 p.m. EDT
Register: https://webinar.connectmeinforma.com/event/register/-M92_M9vVnvsAHHv?partnerref=EXTonsemiLinkedIn

🔍 Find the Optimal Gate Driver for Your SiC MOSFET in Minutes

See how the onsemi Elite Pairing Studio evaluates compatible EliteSiC MOSFET and gate driver combinations, models switching behavior and compares key performance tradeoffs without hours of manual datasheet analysis. Balocco will demonstrate how data-driven recommendations and detailed switching waveforms can help engineers more quickly narrow their options and move forward with confidence.
📅 September 17 | 11:00 a.m. EDT
Register: https://event.on24.com/wcc/r/5465226/481CB9044BDBF185A5FD8EB96FBFE7D6?partnerref=on

Register now to attend one or both sessions.

09/03/2026

AI keeps getting more powerful. But can the infrastructure underneath it keep up?

At onsemi Investor Day 2026 on September 16, we’ll explore one of the biggest challenges shaping the next era of technology: scaling AI as power, heat and physical space become increasingly difficult constraints.

More compute means more power, more heat and less room to work with. The fix isn't just bigger power supplies. It's infrastructure that converts energy more efficiently, so systems run cooler and tighter.

That's no longer a problem you solve one component at a time. It's a system-level problem and it's what will determine how far AI and other intelligent technologies can actually scale.

Join us for Investor Day 2026 to see how onsemi is preparing for what comes next.

Register for the webcast today: https://www.onsemi.com/company/events/onsemi-investor-day

09/01/2026

What makes a “software-defined” vehicle possible?

It starts with the hardware.

Advanced driver assistance, automated parking, intelligent lighting and more efficient electric powertrains may get most of the attention, but underneath them is a network of sensing, power and control technologies working together across the vehicle.

And onsemi technology is inside more of those systems than you might realize.

Hyperlux image sensors help driving systems capture critical visual information, ultrasonic sensors support close-range awareness for automated parking and dual inductive rotary position sensors translate physical movement into accurate control signals.

And that’s only part of the story. More onsemi technologies are working across the vehicle to support power, control, lighting and other critical functions. Together, they give software the hardware foundation it needs to see, sense, control and respond.

Discover how onsemi is helping make the next generation of vehicles safer, smarter and more efficient: https://www.onsemi.com/solutions/automotive

08/31/2026

Complex roads. Changing light. Vulnerable road users. Split-second decisions. 👁️🚘

For advanced driver assistance systems, seeing the scene is only the beginning. The real challenge is turning complex scenes into clear decisions.

That’s what we’ll be exploring at AutoSens Barcelona, September 22–24.

Visit onsemi at booth 119 to experience the latest evolution of our automotive imaging solutions for ADAS and e-Mirror applications. See how we’re helping engineers simplify automotive vision systems while enabling the perception, safety and performance needed for increasingly intelligent vehicles.

Turning complex scenes into clear decisions.

📍 La Farga de L’Hospitalet, Barcelona
📅 September 22–24
📸 Booth 119

Register now and make plans to meet us at AutoSens Barcelona: https://www.onsemi.com/company/events/autosens-europe-2026

08/27/2026

AI racks, robots and industrial systems are all asking the same thing from power electronics: deliver more power without taking up more space.

GaNEXUS™, onsemi’s gallium nitride (GaN) power portfolio, is built for that challenge.

With faster switching, lower switching losses and higher power density than conventional silicon solutions, GaNEXUS helps engineers rethink power architectures for demanding applications including AI data centers, robotics, industrial automation and energy infrastructure.

The portfolio spans 40V to 650V GaN FETs, along with 650V GaNEXUS Smart devices that integrate protection features to simplify system design and improve reliability.

Combined with onsemi silicon and EliteSiC technologies, GaNEXUS gives engineers more options to optimize efficiency, thermal performance, system size and cost across the power-delivery chain.

As the demand for power keeps growing, the technology delivering it has to keep evolving too.

Learn more about GaNEXUS and the future of intelligent power. 👉 https://www.onsemi.com/GaN

08/25/2026

Did you know some of the most important signals in a modern vehicles can be measured in just a few millivolts?! ⚡️🔍

Pressure and force sensors are constantly feeding data into automotive systems that manage braking, EV battery cooling and occupant detection. Some of those signals measure as little as 6 mV, yet they still have to stay accurate through electrical noise, temperature swings and other harsh conditions.

That’s the job of the onsemi NCV7192.

It powers the sensor, amplifies and filters the signal, compensates for temperature effects and catches sensor faults in a single device. Engineers get a simpler design with fewer external components while maintaining overall accuracy of 0.25% or better.

It’s a lot of work for a very small signal.

Download our latest white paper to see what it takes to turn pressure and force sensor outputs into data the system can trust. ⚡️🔍

https://www.onsemi.com/design/technical-documentation?utm_source=facebook&utm_medium=social&utm_content=07-26-pressure-sensor-whitepaper&utm_term=pressure-sensor&utm_campaign=auto&utm_region=amr ==

08/24/2026

Progress is measured by what we change – not just what we promise.

Across onsemi, our teams are finding new ways to use energy more efficiently, reduce emissions, conserve water and materials and create more value with fewer resources.

The results highlighted in our 2025 Sustainability Report show that progress is happening across our operations, while the technologies we develop continue helping customers build more efficient vehicles, data centers, energy systems and industrial applications.

There is still more work ahead, but all efficiencies gained, resources saved and emissions reduced move us closer to a cleaner, more resilient future.

Explore the 2025 onsemi Sustainability Report to see how we’re putting sustainability into action.

👉https://www.onsemi.com/site/pdf/sustainability-report.pdf

08/21/2026

Investor Day 2026 is less than a month away!

On September 16, onsemi's executive leadership team will take the stage in New York City to share a closer look at our strategy, long-term growth opportunities and the technologies shaping the next phase of the company.
We'll explore how onsemi is positioned to address some of the biggest technology shifts in AI data centers, automotive, robotics and more.

Register now to watch the Investor Day webcast live. (link in the comments)

08/20/2026

Can using less power actually help a drone see better? 👀

Yes. And the reason comes down to heat.

Drones pack motors, processors, sensors and other electronics into a tight, power-constrained space. As onsemi’s Stephen Harris explains, the temperature of an image sensor can directly affect its performance. Lower-power sensors generate less heat, which can ultimately help improve image quality.

In a new interview with Future Electronics / Electronic Component Distribution, Steve explores what engineers need to consider when designing the next generation of drone vision systems, from power and dynamic range to global shutter, sensor fusion and edge processing.

Watch the full conversation to learn how advancements in imaging technology are helping drones see and navigate the world around them. 👇

The Current Video Podcast: Season 6, Episode 5 | Drones have evolve...

08/17/2026

We're still riding the high of Week and the incredible energy our teams brought to celebrations around the world.

In Vietnam, Momentum Monday set the tone with employees across the site coming together to celebrate connection, teamwork and pride in being part of onsemi.

The 'Strike in Orange' Photo Contest added a creative twist, giving teams a chance to show their onsemi spirit in orange-themed outfits and poses, while building even stronger connections across departments.

Creative outfits. Big team spirit. Tons of personality.

Exactly the kind of energy Week is all about.