Discflo Pumps

05/28/2026

¡Solo faltan unos días para el Congreso Mexicano del Petróleo 2026! 🇲🇽

Estaremos en el stand 917 mostrando cómo las bombas Discflo manejan los fluidos que detienen a otras bombas: agua de producción, materiales abrasivos, altos contenidos de sólidos y flujos viscosos.

Sin obstrucciones. Sin desgaste excesivo. Sin emulsificación.

Si usted se enfrenta a aplicaciones exigentes en el sector de petróleo y gas, asegúrese de incluir el stand 917 en su itinerario.

05/27/2026

Pulp & paper mills face some of the toughest pumping conditions in industry — abrasive slurries, fibrous materials, entrained air, and high-solids fluids can quickly lead to clogging, cavitation, excessive wear, and costly downtime.

Join Discflo Pumps next week for an educational webinar focused on solving these common pumping challenges in pulp & paper operations. We’ll discuss:

✔️ Common causes of pump failure in pulp & paper applications
✔️ Strategies to reduce clogging, cavitation, and maintenance
✔️ Best practices for handling abrasive and shear-sensitive fluids
✔️ How non-impingement, laminar flow pumping can improve reliability
✔️ Real-world application examples from demanding operations

If reliability, uptime, and lower maintenance costs matter to your operation, this webinar is for you.

Register here: https://na2.hubs.ly/H05KgLz0

05/26/2026

Headed out the door and built for one of the toughest services we see.

These Discflo 403-14-2HHD units are on their way to our partner John Brooks—engineered to handle a highly abrasive, acidic uranium sludge slurry.

✔ 59% solids
✔ 10,000 cP viscosity
✔ pH 1.5–2.0
✔ 200°F operating temperature
✔ 108 ft TDH @ 20 GPM

This is where conventional pumps struggle—high solids, corrosive chemistry, and demanding conditions. Discflo’s non-impingement design keeps fluid moving while minimizing wear and protecting critical components.

Built to perform. Built to last. Built to endure.

👉 See how Discflo handles the toughest applications: https://na2.hubs.ly/H05CM6J0

05/21/2026

Nos dirigimos al Congreso Mexicano del Petróleo 2026, listos para conectar con los operadores que enfrentan los desafíos más complejos de la industria en materia de fluidos.

📍 Stand 917 | Veracruz, México

Desde el agua de producción hasta las lechadas abrasivas con alto contenido de sólidos, las bombas convencionales a menudo sufren problemas de desgaste, obstrucciones y emulsificación. Las bombas Discflo están diseñadas de manera diferente: utilizan un flujo laminar sin impacto directo para mantener los fluidos en movimiento, protegiendo simultáneamente tanto su equipo como su proceso.

✔ Maneja fluidos abrasivos y con alto contenido de sólidos
✔ Minimiza el desgaste y el tiempo de inactividad no planificado
✔ Previene la emulsificación en aplicaciones de petróleo y agua
✔ Ofrece un rendimiento fiable con fluidos viscosos y con aire arrastrado

Si la fiabilidad, la eficiencia y el costo total de propiedad son factores clave para su operación, conversemos.

Visítenos en el Stand 917 o envíenos un mensaje para programar una reunión con nuestro equipo.

05/20/2026

Pulp & paper operations push pumps to the limit — from abrasive slurries and fibrous materials to entrained air and high-solids fluids. Join Discflo Pumps for our upcoming webinar and learn how mills are solving some of their toughest pumping challenges while reducing downtime, maintenance, and operating costs.

In this webinar, we’ll cover:
✔️ Common causes of pump failure in pulp & paper applications
✔️ How abrasive slurries, fibers, and entrained air impact performance
✔️ Strategies to reduce clogging, cavitation, and excessive wear
✔️ Best practices for handling shear-sensitive and high-solids fluids
✔️ Real-world examples of improving reliability and uptime

If you’re looking to improve pump performance and keep operations running smoothly, this webinar is for you.

Register here: https://na2.hubs.ly/H05F0Lt0

This webinar will explore common pumping challenges throughout pulp and paper operations and discuss practical strategies for improving reliability, reducing maintenance, and protecting product integrity.

05/19/2026

Our partners at Kinder-Janes Engineers Limited are set up and ready for Chem UK Events 2026 at the Birmingham NEC tomorrow!

We’re excited to support Kinder-Janes Engineers Limited as they showcase Discflo Pumps at Booth F40. Stop by tomorrow to see our demo pump in action and learn how Discflo technology handles abrasive, viscous, high-solids, and air-entrained applications that challenge conventional pumps.

See you at the show!

05/19/2026

Emulsification is one of the most costly—and overlooked—challenges in oil & gas operations.

When oil and water mix, it leads to higher viscosity, difficult separation, increased maintenance, and lost production efficiency.

So what’s causing it?
Conventional pumps create turbulence and shear that break down fluid boundaries—making emulsification worse.

There’s a better way.

Discflo’s disc pump technology uses smooth, laminar flow to move fluids gently—helping prevent emulsification while reducing clogging, downtime, and wear.

If you’re handling oily water, sludge, or multiphase fluids, this is a must-read.

👉 Read the full article: https://na2.hubs.ly/H05j9190

How Discflo Disc Pumps Control Emulsion for Increased Efficiency and Cost Savings Emulsification is a costly and disruptive challenge for the oil and gas industry. Emulsions can create issues throughout the entire production pipeline–from productivity loss and product damage to increased maintenan...

05/19/2026

Episode 3 of Stump My Pump is here—and this one’s a little… fishy 🦐

We put shrimp to the test through a Discflo pump to see how it handles delicate solids. No clogging. No damage. Just smooth, gentle flow.

When your process can’t afford breakdowns or product loss, you need a pump built to handle the unexpected.

Got something tougher? Bring it on—contact us: https://na2.hubs.ly/H05CmgJ0

05/14/2026

Pump problems don’t just slow you down—they cost you time, money, and production.

Clogging. Excessive wear. Cavitation. Seal failures.
Sound familiar?

We put together a free troubleshooting guide to help you identify common pump issues—and what you can do to fix them.

👉 Download the guide: https://na2.hubs.ly/H05dNnb0

👉 Still stuck? Let’s solve it together: https://na2.hubs.ly/H05dQl00

05/13/2026

Episode 3 of Stump My Pump is here—and this one’s a little… fishy 🦐

We put shrimp to the test through a Discflo pump to see how it handles delicate solids. No clogging. No damage. Just smooth, gentle flow.

When your process can’t afford breakdowns or product loss, you need a pump built to handle the unexpected.

Got something tougher? Bring it on—contact us: https://na2.hubs.ly/H05j8rs0