advancedextractionlabs

Directions Website Contact the business

advancedextractionlabs Contact information, map and directions, contact form, opening hours, services, ratings, photos, videos and announcements from advancedextractionlabs, Commercial Equipment, 1695 piner Road, Santa Rosa, CA.

10/24/2026

Containerized or modular-frame? Two planning directions for data center enclosures. 🏗️

A modular-frame approach can support a configured building system. A containerized approach can support a rugged, repeatable enclosure format. The right direction depends on the project brief.

• Category One uses a modular-frame building architecture for custom layouts and larger support spaces, with precision HVAC integration
• ISO Container construction begins with a transportable container format for equipment packages, power distribution, battery integration, and site-coordinated installation
• Compare both directions when the project has defined equipment, deployment, access, thermal, electrical, and site requirements
• Cooling and ventilation are sized around the equipment heat load. UL 508A control-panel capability and factory acceptance testing are available as specified
• Off-site design and fabrication can proceed alongside approved site work; schedule impact depends on design, procurement, approvals, and field conditions

What we build: prefabricated electrical buildings (e-houses), UPS and battery room enclosures, generator enclosures, and cooling and mechanical room enclosures. Fabrication, electrical, controls and suppression are built in-house by our own team in Santa Rosa, CA.

Read the comparison: https://advancedextractionlabs.com/insights/containerized-versus-modular-frame-data-center-enclosures/

DM “DEPLOY” with your equipment schedule, heat load, site constraints and timeline. An engineer, not a call center, replies within one business day.

10/24/2026

Cabinet, walk-in or BESS? How to choose a lithium battery storage enclosure. 🔋

If your batteries fit on shelves and the storage can stay indoors, start with a cabinet. If they arrive on pallets or racks, need charging, or have to live outside, you need a walk-in enclosure. If the batteries will be wired up and running as an energy storage system, you need a BESS enclosure.

The questions our engineers work through on a first call:
• Inside the building or out in the yard? Sentinel Mini™ cabinets are for indoor use only
• What batteries, and what shape are they in? Dimensions, weight, energy and state of charge, plus anything damaged or recalled
• How many, and how fast do they move? Flow matters more than the count
• Where does the off-gas go? In a Sentinel™, the gas detection is wired to the emergency exhaust
• Will you charge batteries in there? Charging changes how we size the ventilation and detection
• What will the fire marshal want to see? Your local AHJ has the final say, so bring them in early

Sentinel™ walk-ins come in 8×10, 8×20 and 8×40 ft, custom, or built to your room. Fabrication, wiring, controls and suppression are all done in-house in Santa Rosa.

Read the guide: https://advancedextractionlabs.com/insights/what-to-review-before-selecting-a-battery-storage-enclosure/

DM “LITHIUM” with your battery make and model, how many you hold, and where the enclosure would go. An engineer, not a call center, will get back to you within one business day.

General information only; your AHJ sets the requirements for your site.

10/23/2026

Completed projects: solvent-processing enclosures. 🧪

Indoor and modular process-room formats, configured around project equipment and classified-area requirements. A few builds from the AEL project gallery.

What goes into each one:
• Solvent Processing Enclosures, UL 1389 listed (US and Canada)
• Hazardous Location Enclosures with C1D1 / C1D2 project engineering
• Room formats from indoor process rooms to modular units, built around the equipment that goes inside
• Fabrication, electrical, controls and suppression built in-house by our own team
• Factory testing, documented as specified

See the project gallery: https://advancedextractionlabs.com/completed-projects/solvent-processing-enclosures/

DM “PROCESS” with your equipment, room format and timeline. Our team, not a call center, responds within one business day.

General information only; confirm requirements with your AHJ.

10/23/2026

What a complete enclosure project review should include. 📐

Before fabrication, an enclosure project review should align the full input package, following AEL's sequence from requirements capture through design, fabrication, integration, and delivery.

Align:
• The application
• Dimensions
• Equipment
• Site conditions
• Access
• Controls
• Ventilation
• Documentation
• Schedule
• Installation approach

A clear input package reduces rework and gives the engineering and manufacturing teams a shared basis for the project. At AEL, fabrication, electrical, controls and suppression are built in-house by our own team, with factory testing documented as specified.

Read the guide: https://advancedextractionlabs.com/insights/what-a-complete-enclosure-project-review-should-include/

DM “REVIEW” with your application, dimensions and site conditions. Our team, not a call center, responds within one business day.

General information only; confirm requirements with your AHJ.

10/22/2026

Planning a cleanroom or lab fume hood project? Frame the requirements before the configuration. 🌬️

Before requesting a cleanroom or lab fume hood configuration, frame the airflow, process, access, filtration, and installation requirements first.

Define:
• The process
• People and material flow
• Cleanliness objective
• Airflow direction
• Filtration needs
• Equipment footprint
• Access
• Utilities
• Installation conditions

Those project inputs help determine whether a ducted or ductless lab fume hood or a larger controlled-environment solution is appropriate. At AEL, fabrication, electrical, controls and suppression are built in-house by our own team.

Read the guide: https://advancedextractionlabs.com/insights/planning-a-cleanroom-or-lab-fume-hood-project/

DM “AIRFLOW” with your process, cleanliness objective and equipment footprint. Our team, not a call center, responds within one business day.

General information only; confirm requirements with your AHJ.

10/22/2026

Planning chemical or flammable storage? Start with the materials. 🧪

Before anyone specifies a chemical or flammable storage enclosure, the conversation should begin with the material information. Here's a concise checklist for beginning a chemical, flammable, or hazmat storage conversation.

Begin with:
• The material inventory
• Safety data
• Container types
• Quantities
• Handling method
• Storage duration
• Site location
• Access
• Facility or jurisdictional requirements

Those inputs inform the enclosure, containment, ventilation, finishes, and interior layout discussion. At AEL, fabrication, electrical, controls and suppression are built in-house by our own team.

Read the checklist: https://advancedextractionlabs.com/insights/the-material-information-needed-for-storage-planning/

DM “INVENTORY” with your material inventory, container types and quantities. Our team, not a call center, responds within one business day.

General information only; confirm requirements with your AHJ.

10/21/2026

How to organize a hazardous-location enclosure project. 📋

A hazardous-location enclosure project goes smoother when the project inputs are organized up front, so the team can align classification, ventilation, controls, documentation and site conditions.

A useful review includes:
• The classified area
• Materials and process
• Equipment list
• Ventilation needs
• Access
• Emergency interfaces
• Site conditions
• Documentation requirements

Qualified project professionals should confirm the final design and approvals. At AEL, fabrication, electrical, controls and suppression are built in-house by our own team, with factory testing documented as specified.

Read the guide: https://advancedextractionlabs.com/insights/how-to-organize-a-hazardous-location-enclosure-project/

DM “SCOPE” with your classified area, materials and process, and equipment list. Our team, not a call center, responds within one business day.

General information only; confirm requirements with your AHJ.

10/21/2026

C1D1 vs C1D2: what the classification means for your room. ⚠️

C1D1 and C1D2 are shorthand for Class I, Division 1 and Class I, Division 2: two hazardous-location classifications for areas where flammable gases or vapors can be present. In a Division 1 area, an ignitable atmosphere is expected in normal operation or during routine maintenance. In a Division 2 area, the flammable material is normally contained, and an ignitable atmosphere is expected only when something goes wrong, such as a leak, a breakdown or a ventilation failure.

The classification of a space shapes the electrical equipment, ventilation, gas detection and documentation a project needs. In general terms, a C1D1 room project has to settle ventilation, gas detection (LEL detection) tied to alarms and the ventilation controls, classified electrical with sealed wiring methods, fire protection where the AHJ requires it, and documentation for review. C1D2 rooms address the same topics for a lower likelihood of release. Locations are classified rather than certified: the project's qualified professionals classify the area and the authority having jurisdiction (AHJ) accepts it, so settle the classification before the enclosure is specified. AEL's solvent processing booths and rooms are UL 1389 listed (US and Canada).

Read the full guide: https://advancedextractionlabs.com/insights/c1d1-vs-c1d2-requirements/

DM “DIVISION” with your process, solvents and approved area classification. Our team, not a call center, responds within one business day.

General information only; confirm requirements with your AHJ.

10/20/2026

Start with what happens inside. 🏭

Hazardous location rooms, solvent processing labs, chemical and solvent storage, data center buildings, robotic cells and cleanrooms do very different jobs, but AEL builds them the same way. Our own team does the steel, electrical, controls, ventilation and suppression work in one shop in Santa Rosa, California, so the room arrives with its systems installed and tested instead of being pieced together on site. Hazardous location rooms and enclosures for C1D1 and C1D2 classified atmospheres get ventilation, gas detection, interlocks and controls engineered around your area classification. Control panels are built to UL 508A in our Santa Rosa panel shop, with UL or ETL listed components and factory testing documented as specified. What your enclosure needs depends on your process, your materials and your local fire and building officials, so tell us what happens inside and where it will go, and we configure the enclosure around the review your authority having jurisdiction (AHJ) requires.

DM “INSIDE” with your process, materials and site. An engineer, not a call center, replies within one business day.

https://advancedextractionlabs.com/solutions/industrial-environments/

10/20/2026

Bring us the project that doesn't fit a catalog. 🛠️

Some industrial enclosure projects don't fit a standard product family. For those, AEL reviews the actual process, equipment, utilities, environment and site constraints before identifying a current solution pathway. Current paths start with the closest application: critical environments planned around process, personnel, utilities and facility integration; hazardous locations with project-specific review of classified areas (C1D1 and C1D2), ventilation, controls and documentation scope; modular cleanrooms and controlled-space packages; and indoor and modular industrial process rooms. For an initial review, send the intended process, equipment list, desired footprint, indoor or outdoor location, utility needs, environmental conditions, access requirements, site location and any project documentation you have. If no current AEL product fits, we'll tell you at the initial review instead of steering you into an unrelated product category. Everything is built in-house in Santa Rosa, CA, with fabrication, electrical, controls and suppression by our own team, and factory testing documented as specified.

DM “CUSTOM” with your process and footprint. Our team, not a call center, responds within one business day.

https://advancedextractionlabs.com/specialty-custom-enclosures/

Address

1695 Piner Road
Santa Rosa, CA
95403

Website

Alerts

Be the first to know and let us send you an email when advancedextractionlabs posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to advancedextractionlabs:

Shortcuts

Share

Category