Melfred Borzall

Melfred Borzall Melfred Borzall. World’s best HDD tooling for all HDD Rigs. Improving the productivity of horizontal directional drilling

75 Years of Manufacturing HDD Tooling for the Horizontal Directional Drilling Industry

Every project has its own challenges, which is why custom tooling matters. For this water project, the crew drilled 129 ...
06/19/2026

Every project has its own challenges, which is why custom tooling matters. For this water project, the crew drilled 129 feet through sand and silt and installed steel pipe using a custom 8" MDP. Built for the application and ready for the conditions, the tooling matched the job from the start.

Congratulations to our 2026 Melfred Borzall Foundation Scholarship recipients! 🎓This year, the foundation is awarding se...
06/17/2026

Congratulations to our 2026 Melfred Borzall Foundation Scholarship recipients! 🎓

This year, the foundation is awarding seven $2,000 scholarships, including five to children of Melfred Borzall employees and two to children of our distributor partners.

A special thank you to DCD for their continued support and standout $80,000 contribution, which helped make these scholarships possible.

We are proud to support the next generation and wish all of this year's recipients the very best in their educational journey!

The crew needed parts, so we loaded up and brought them to the jobsite.Supporting our customers in the field is what it’...
06/15/2026

The crew needed parts, so we loaded up and brought them to the jobsite.
Supporting our customers in the field is what it’s all about. 😎

06/12/2026

This custom Sabertooth was built with a heavy package of dome cutters, extra water holes, welded-on pipe protection, and chunky hardfacing where it matters most. Every feature was added for a reason. When the job calls for something different, sometimes the best tool is the one built specifically for the ground it's headed into.










Dave O’Mara Contractor Inc. completed a 16" water line installation in Columbus, IN, using a JT60 paired with a 24" Turb...
06/10/2026

Dave O’Mara Contractor Inc. completed a 16" water line installation in Columbus, IN, using a JT60 paired with a 24" Turbo reamer and a DCD swivel. The setup delivered a steady pullback and kept the project on track.

Mitira Drilling completed a 160m creek crossing in Wodonga, Australia, pulling 4 x 110mm lines for communications and el...
06/08/2026

Mitira Drilling completed a 160m creek crossing in Wodonga, Australia, pulling 4 x 110mm lines for communications and electrical while using the Red Diamond through changing ground that shifted from clay and sand into shale, keeping the job moving steady through every condition. ♦️

06/05/2026

In Oklahoma, a crew ran a Tri-Con Eagle Claw through clay, sandstone, and shale and was extremely impressed with its steering capabilities. 🦅















In Stayton, OR, a first-time customer decided to put the Service Shot to work after hearing how well it handled cobble g...
06/03/2026

In Stayton, OR, a first-time customer decided to put the Service Shot to work after hearing how well it handled cobble ground conditions.

The crew drilled out 120 feet in under 30 minutes, and the results spoke for themselves. By the end of the demo, the customer was excited enough to add a Service Shot to the lineup. 😎

Mountainland Supply held the grand opening for its new Aurora, Colorado location, and the turnout brought in a solid cro...
06/01/2026

Mountainland Supply held the grand opening for its new Aurora, Colorado location, and the turnout brought in a solid crowd ready to check out the tooling firsthand.

The Tri-Con and Service Shot saw plenty of action throughout the event, and by the end of the day, a customer from Denver added a Service Shot to the lineup. 😎

05/29/2026

Mitira Drilling & Construction completed a 120m shot through clay and shale in Wodonga, Australia, pulling 4 x 110mm electrical lines using a 16" Tornado with a Tracto 15 to handle the changing ground conditions.















Address

2712 Airpark Drive
Santa Maria, CA
93455

Opening Hours

Monday 7am - 4:30pm
Tuesday 7am - 4:30pm
Wednesday 7am - 4:30pm
Thursday 7am - 4:30pm
Friday 7am - 4:30pm

Telephone

+18057390118

Alerts

Be the first to know and let us send you an email when Melfred Borzall posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Share