https://www.facebook.com/787846138056079/

Central Tractor Works

Name: Central Tractor Works
Address: Sandwich, NH, 03227, US
Telephone: (603) 231-2035

Home
United States
Sandwich, NH
Central Tractor Works

I Buy, Trade, Sell and Repair Old Tractors, all shapes and colors.

03/18/2021

Are you still out there? I'm still here. Between COVID and the Political Circus of 2020 things have been "quiet" as far as media goes on this end, but everything is still going on just like it was before. I'll get some pictures of the latest stuff and what's coming up next here; currently digging out the existing fleet and licking wounds of last mowing season. Come April 1st I'll be open again for repair jobs, pickups, dropoffs, mowing quotes, etc. As of this year (2021) and going forward I won't be working on any more power sport toys or vehicles; this includes scooters, snowmobiles, fourwheelers, dirtbikes, jet skis, boats, cars, trucks (I know) and any other outdoor "toy" you can think of. Tractor Repairs and Field Mowing only, that's all we're doing from here forward, no exceptions. Thanks.

07/01/2020

Did someone forget to put the soup can back on your exhaust? Get halfway through a head gasket and give up? Bad things happen to good tractors, and some of the best engines lock up first; but that doesn't mean it's the end of the line. We save "dead" engines all the time. Call us, we're taking winter repair jobs.

04/27/2020

If you want one Case, you need a few... Since my last VAC wide front, I've looked high and low for another and then multiple other tractors that I could pull the pieces and parts off of. Between a VAI w the factory Detroit sickle, a brass tag VAI that came from an airforce base, a couple of parts "lumps" and other VAC's, I've got what I need. If you have one of these and want it fixed or just "gone" let us know.

04/24/2020

Between the virus and the annual craziness I haven't been on here much to share what's happening in the shop. Tractors are still coming and going, we've still got a couple repair jobs yet and are still accepting more. I'm in the middle of two restorations, which I'll get an album going for both as I find the time; here's a couple of starter photos. One is a plain Jane 1948 Case VAC and the other is a 1963 International 404 w/ a Triumph 3500 Hydro Clipper sickle bar. I'll try to get some more stuff on here as I get the time, I'm just about dug out of my hole.

12/02/2019

Getting stuck in the dark with your tractor's old 6 volt system? We now offer modern LED solutions for 6 volt systems. Don't be fooled, LED companies claim their products will operate down to 6 volts, yes, that's true, but barely. We can get most any size or type of LED that you want and match it to the proper inverter.

09/08/2019

Been a while since we've been on here posting things but it's been a busy summer. This 1970 Ford 4000 diesel comes from the same folks that had the gas '69 we went through back in the winter. Injectors, seals and some power steering work was all this one needed for now and at 6000hrs.

04/30/2019

Made a decent haul this weekend, a Farmall Super C and a regular H with another H trans, bell housing and rear end. Call for H parts, we won't need them all. Super C for sale only for the time being, call for details.

04/25/2019

1957 Ford 640 tractor, Sherman 3spd auxiliary, factory power steering, 3 point hitch and PTO, SOLD to Wayside Farm in North Sandwich. Only sat here half a day.

04/03/2019

Didn't take much and boy does it run good. Everything works except the lights.

03/31/2019

Did your tractor lose spark? Give us a call, we take care of most magnetos as well.

03/30/2019

Some folks were wondering what's actually for sale here vs. repair jobs sitting around the yard so here goes.

1948 Ford 8n, Sherman 3spd auxiliary transmission, 3 point hitch and PTO, 6 volt, starts runs and operates well.

1950 Ford 8n, Hupp 3spd auxiliary transmission, 3 point hitch and PTO, 12 volt, not running.

1951 Ford 8n, not running, 3 point hitch and PTO, sitting on decent rubber, straight sheet metal.

1951 Farmall Cub, starts runs and operates great, 6 volt, all original with new tires. Has weights, chains, sickle bar, belly mower deck, snow plow w brackets to make it a grader blade.

1952 Ford 8n parts tractor, hydraulics transmission and axle parts still available.

1955 Farmall 300 wide front, not running, has power steering, Torque Amplifier, fast hitch, live PTO, IH 2000 loader on it.

1957 Farmall 230 narrow front, not running, has original loader and hydraulic setup to run it and the fast hitch on the back. PTO, 6 volt, tight steering, needs a rim.

1971 Arctic Cat Lynx with the Sachs Wankel 303 rotary engine. Runs good, all original, in nice straight shape.

1980 Ford 545 loader, diesel starts and runs great, all hydraulics work well including 3 point hitch, has good rubber, weight block on the back, ROPS cab.

1997 Ford F350 rackbody. Starts runs and drives well, has the 5.8, AOD trans, 109k miles, decent interior, Reading utility body that's not rotted like most. Comes with a sticker.

2002 John Deere GT235 garden tractor. Starts runs and operates real nice, in great shape. Has weights, chains, snow plow/grader blade, snowblower, 48" mower deck with thatcher and powerbagger as well as a dump cart.

Address

Sandwich, NH
03227

Telephone

(603) 231-2035

Website

facebook.com

Alerts

Be the first to know and let us send you an email when Central Tractor Works posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Central Tractor Works:

Shortcuts

Want your business to be the top-listed Equipment Service in Sandwich?