McCrea Heavy Machine Works

McCrea Heavy Machine Works We are a full service metal shop. Offering machining, fabricating, welding, and machinery sales.

1.5" stainless steel tube knurled to be used as handrails at a spa.
05/19/2026

1.5" stainless steel tube knurled to be used as handrails at a spa.

1929 brass honeycomb radiator. It doesn't have any damage but I've never done a pressure test on it. Came from a hudson ...
05/13/2026

1929 brass honeycomb radiator. It doesn't have any damage but I've never done a pressure test on it. Came from a hudson with a super six engine. I can take any measurements needed to see if it fits your needs. $350 located in robesonia pa 19551

1929 transmission, bell housing, clutch, pressure plate and fly wheel. Came from a 29 hudson and will bolt to a super 6 ...
05/13/2026

1929 transmission, bell housing, clutch, pressure plate and fly wheel. Came from a 29 hudson and will bolt to a super 6 engine but can be changed with other bell housings. Has the original clutch with replaceable cork plugs. Has a box of random brackets and clutch pedal. $300 located in robesonia pa 19551

Torque roll i repaired on site for a customer. The shaft walked out 3.5" over time and needed pressed back in. (With my ...
04/19/2026

Torque roll i repaired on site for a customer. The shaft walked out 3.5" over time and needed pressed back in. (With my own handy press fixture i built just for these parts) I had to air arc out all the cracked welds and put a weld bevel on the id of both hubs so it could be permanently welded in place then ground flush so the bushings can be installed.

Drilling out the rusted in stub shaft of a 50" gear
04/15/2026

Drilling out the rusted in stub shaft of a 50" gear

Bought a new forklift for the shop and when I went to pick it up I found out its actually a spoonlift
04/02/2026

Bought a new forklift for the shop and when I went to pick it up I found out its actually a spoonlift

All new compartment bottoms for a utility body truck
03/20/2026

All new compartment bottoms for a utility body truck

Machinery linkage for a factory made from 17-4 stainless steel.
02/26/2026

Machinery linkage for a factory made from 17-4 stainless steel.

Making intermediate sizing dies to make .577-450 brass out of 24 gauge brass shells.
02/25/2026

Making intermediate sizing dies to make .577-450 brass out of 24 gauge brass shells.

Repaired a handrail for a local business near Reading.
02/11/2026

Repaired a handrail for a local business near Reading.

Address

Robesonia, PA

Telephone

6106036442

Website

Alerts

Be the first to know and let us send you an email when McCrea Heavy Machine Works posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to McCrea Heavy Machine Works:

Shortcuts

Share

Category