What are the opening hours?

Monday 7:30am - 4:30pm Tuesday 7:30am - 4:30pm Wednesday 7:30am - 4:30pm Thursday 7:30am - 4:30pm Friday 7:30am - 4:30pm

MPI Fabrication

Directions Website Contact the business

A Sheet Metal Fabrication company based out of Richmond Hill, Ga. We service all sheet metal needs

10/29/2026

Retail buildout. Glass is in, ceiling is not, and the duct is already sitting inside the space.

Galvanized spiral and fittings, 6 inch through 30 inch, cut to the layout on the drawing and dropped in the building instead of left in the parking lot waiting on a crew.

Retail, restaurant and office buildouts all run on the same math. Somebody has a lease date and everything upstream of it is a promise. The metal should not be the part you are waiting on.

Got a buildout with a date on it? Call us early.

(912) 755-0030

10/27/2026

New rooftop unit, old curb, and the footprints do not match.

That is a curb adapter, and it is one of the most ordinary things we build. Send us the existing curb dimensions and the curb dimensions of the unit going on, and we will build the part that bridges the two.

Built in Richmond Hill, standard turnaround 24 to 72 hours, on our truck to your job.

Change-out season is here. If you have units going on in November, get the curb work quoted now rather than the morning the crane shows up.

(912) 755-0030

10/22/2026

Look at the tags.

Every piece in this photo left our floor labeled. When the truck gets to the job, nobody is standing in the framing holding two plenums that look the same trying to work out which one goes where.

Rectangular plenums, transitions and fittings, built together and sent together.

It is a small thing right up until it is four guys and a lift standing around at seven in the morning. If you are sending us a job with a lot of parts on it, send the takeoff with it.

(912) 755-0030

10/20/2026

Not everything that leaves this building is duct.

We run CNC and structural work out of the same shop in Richmond Hill. If the part is flat, if it is metal, and if it comes with a drawing, it is worth asking us about.

DXF, a PDF, or a dimensioned sketch somebody drew on the back of a submittal. Any of those work. We will tell you what it costs and when you can have it.

Most of the guys who order duct from us have never asked what else the shop can cut. Ask.

(912) 755-0030

10/17/2026

Same school, from the parking lot.

That straight dark red line running the whole length of the roof is our fascia and edge metal on the new Midway Middle School in Liberty County. Fabricated in Richmond Hill, installed by RPI Roofing.

It is the first thing you see walking up to the building, and it will still be the first thing you see in twenty years. We are glad it is ours.

If you have institutional or commercial work coming up in Liberty, Bryan or Chatham County, we are the shop right down the road.

(912) 755-0030

10/15/2026

That white line at the top of the wall is the whole package.

Coping, parapet cap, and the box gutter behind it on the new Midway Middle School in Liberty County, with the outlets cut into the face. All of it fabricated in Richmond Hill and installed by RPI Roofing.

The gutter is our ANSI/SPRI GT-1 tested aluminum box gutter system, tested independently by National ES Testing Service.

If you are pricing a commercial roof, you can get the coping, the cap, the gutter and the edge metal off one ticket from one shop instead of chasing three suppliers.

(912) 755-0030

10/13/2026

Most people know us for one thing. Usually whatever they happened to order first.

Roofers call us for coping, parapet cap, edge metal and gutters.
HVAC contractors call us for spiral, rectangular and round duct, plenums and transitions.
GCs call us for column covers, sunshades and wall panels.
Builders call us for roof curbs, flashing and whatever is on the drawing that nobody stocks.

Same shop. Same building in Richmond Hill. Same 24 to 72 hours.

If you have only ever ordered one thing off that list, ask us about the rest of it. There is a decent chance the part you have been buying somewhere else is already coming off our floor for somebody down the road.

(912) 755-0030

10/10/2026

Spiral is not only a warehouse product.

That is a galvanized trunk line hung off the joists in a wood framed building, capped and set while the framing is still open. Ours, out of Richmond Hill.

Exposed duct only works if the pipe is worth looking at, which is most of the reason people call us instead of pulling flex off a shelf. 6 inch through 30 inch, fittings cut to the layout on your drawing.

If you have something coming up where the ceiling is going to show, call before the framing closes in. It is a lot easier to build it right than to fix it in the air.

(912) 755-0030

10/08/2026

Send it Monday. Most of the time it is on our truck by Wednesday.

Standard turnaround here is 24 to 72 hours. That is not a rush charge and it is not a favor we are doing you. It is the normal schedule for a shop in Richmond Hill instead of a plant three states away.

October is when everybody is trying to get closed in before the holidays start eating the calendar. If you know what you need in November, put it on our schedule now and stop planning around somebody else's lead time.

(912) 755-0030

09/29/2026

There is metal from our shop in buildings all over the southeast, and most of it disappears the day the ceiling goes in.

Duct, flashing, coping, edge metal, panels, and one off parts. All of it made in Richmond Hill.

If you have something coming up, call early. It is easier to build it right the first time than to work around it on site.
(912) 755-0030

Address

Richmond Hill, GA
31324

Opening Hours

Monday	7:30am - 4:30pm
Tuesday	7:30am - 4:30pm
Wednesday	7:30am - 4:30pm
Thursday	7:30am - 4:30pm
Friday	7:30am - 4:30pm

Website

http://mpifabrication.com/

Alerts

Be the first to know and let us send you an email when MPI Fabrication posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.