Blair Swanson LLC

09/01/2025

76 J10,

08/26/2025

Converted from electric to gas powered.

08/24/2025

08/24/2025

So many projects...

08/24/2025

New project...

08/24/2025

Had this for awhile, just.now getting around to it. Sounds.promising...

04/22/2024

When working on brakes systems it can be difficult to observe the master cylinder while bleeding brakes. If you are fortunate to have a helping hand allow then to Crack bleeder while under pressure so you can observe fluids in the master cylinder. Most master cylinder have two ports, on older jeeps it is split with the front port for the front brake circuit and the rear port for the rear brake circuit. If you are bleeding the rear circuit the farthest run on the brake system you should not see bubbles or fluctuating levels in the front circuit. If you are seeing this discrepancy you need a new master cylinder.

04/15/2024

Lift is installed, tires are mounted, and backspacing sorted out. Just need to install longer brake lines, and bleed the brakes. Oh yeah and retorque everything to spec.

04/14/2024

Significant height difference from stock. 3" lift closer to 4". 235/75 to 35" 12.5.

04/12/2024

Next project is in the works, 35" tires for the J10.

02/18/2022

01/22/2022

Getting closer...