Mello Metalworks

11/02/2026

🔩 CABLE RAILING BUILT TO LAST!

There’s a lot more to a quality cable railing system than just running some cable. Every railing we build at Mello Metal Works is fabricated with attention to detail, strength, and a clean finished look.

Here’s a behind-the-scenes look at how we build our cable railing systems:

1️⃣ Cut & Prep – Posts, spacers, top and bottom rails, tabs, and base plates.

2️⃣ Drill – Precision-drilled posts and spacers for proper cable spacing.

3️⃣ Fit & Tack – Square everything up and tack the frames together.

4️⃣ Weld & Finish – Fully weld frames and grind for a clean finish.

5️⃣ Cable Prep – Running the cable (where we’re at now!).

6️⃣ Sandblast & Powder Coat – Getting everything ready for a durable, long-lasting finish. We only use the best “TNL Multi Services “

7️⃣ Installation – Set the railing sections and securely bolt everything into place.

8️⃣ Final Cable Installation – Run, tension, and finish the cables for that clean modern look.

We take pride in doing things right from the first cut to the final installation. No shortcuts, just quality fabrication built to last!

📍 Serving Coeur d’Alene, Post Falls, Hayden, Rathdrum, and surrounding areas.

Mello Metal Works
Custom Railings | Cable Railing | Fabrication | Installation

📩 Message us for a quote on your next railing project!

10/20/2026

These guys are the best!!! Go check them out if you need a cut or trim!!!

🎉✂️ BIG NEWS AT THE BARBERSHOP CDA! ✂️🎉

We’re officially FULLY STAFFED and firing on all cylinders! 💈🔥

All 4 barbers are back in full swing, and we’re open MONDAY–SATURDAY and ready to get you cleaned up!

Whether you’re looking for a fresh fade, a classic cut, a beard trim, or a full beard cleanup, we’ve got you covered! 💈🧔

📍 Come see us at The Barbershop CDA!
📅 Open Monday–Saturday
💈 Walk-ins welcome!
🔥 Four barbers. Six days a week. One great place to get cleaned up. 😎

Located
296 W Sunset Ave. Ste. 28 CDA, ID. 83814
208-661-9552

👇 HELP US SPREAD THE WORD! Share this post with your friends, family, and anyone who’s overdue for a fresh cut or beard trim! Every share helps support our local shop, and we appreciate you all!

Come on in and leave looking sharp! 💈✂
https://book.squareup.com/appointments/wd8d02tm0gb8d7/location/L4EWGAD7DWY6B/services

10/18/2026

From no railing to a finished custom look!

Another project completed. We took this open stairwell and turned it into a clean, modern, and secure space with a custom horizontal steel railing. 💪

Here’s a look at the process:
📐 Design — Started with measurements and a custom drawing.
🛠️ Fabrication — Cut, fitted, and welded everything in our shop.
🎨 Powder Coating — Finished in a sleek black powder coat.
🏠 Installation — Delivered and installed for a clean, professional finish.

Every project starts with an idea and ends with something built to last. We take pride in the details, quality craftsmanship, and making each railing fit the space perfectly.

Looking for custom interior or exterior railings? We build it to fit your home and your style!

📍 Serving Coeur d’Alene, Post Falls, Hayden, and surrounding North Idaho areas.

10/17/2026

🚀🔧 MELLO METAL WORKS — WE’LL TAKE YOUR PROJECT TO THE NEXT LEVEL! 🔥

Even if we have to fly in to get the job done! 😂🚀

From custom railings to heavy-duty welding and fabrication, we build it right, build it strong, and make it look good.

🔩 WHAT WE DO:
✅ Custom interior & exterior railings
✅ Cable, horizontal & picket railing
✅ Stair rails & grab rails
✅ Mobile welding & on-site repairs
✅ Structural steel & custom fabrication
✅ Trailer repairs & modifications
✅ Custom metalwork for homes and businesses

📍 Proudly serving Coeur d’Alene, Post Falls, Hayden, Rathdrum, Sandpoint & surrounding areas.

📞 CALL OR TEXT: 208-660-3620

Have a project in mind? Send us a message for a quote!

MELLO METAL WORKS
Custom Metalwork. Built to Last.

10/16/2026

🔨🌊 WORK IN PROGRESS — Another Dock Project!

We’re back at it with another dock project here in North Idaho! 💪 We’re getting things underway and making progress on another project out on the water with GET WET diving and TNL Multi Services.

At Mello Metalworks, we take pride in quality workmanship, attention to detail, and getting the job done right.

From custom dock brackets, to custom railings and metal fabrication, we’re here to help bring your projects to life!

📍 Serving Coeur d’Alene, Post Falls, Hayden, Rathdrum, and surrounding areas.

Have a project in mind? Let’s talk!

📩 Send us a message.

Mello Metalworks — Built right. Built to last.

10/13/2026

🔧 BEFORE & AFTER — HORSE TRAILER BUMPER REPAIR! 🐴

This Logan Coach horse trailers ramp broke off. We built a new steel bumper replaced rod and it’s looking a whole lot better! 💪

At Mello Metalworks LLC, we handle more than just custom railings. From trailer repairs and modifications to custom welding and fabrication, we’re here to help get your equipment back in shape.

✅ Trailer repairs & modifications
✅ Custom welding & fabrication
✅ On-site welding
✅ Residential & commercial metalwork

Have a trailer that needs some attention? Give us a call! We’re proud to serve North Idaho and the surrounding area.

📩 Send us a message for a quote!

Mello Metalworks LLC — Built to work. Built to last.

10/08/2026

🔨 Ornamental Railing Project | Mello Metalworks

Another ornamental railing project completed by Mello Metalworks LLC!

We built and installed these custom black steel railings to add both safety and character to the home. From the decorative scroll details on the exterior railing to the clean, simple interior handrail, everything was custom fabricated to fit the space.

✔️ Custom ornamental steel railing
✔️ Exterior stair railing
✔️ Interior handrail
✔️ Custom fabrication & installation
✔️ Durable black finish

Whether you’re looking for something traditional and ornamental or clean and modern, we can build it to fit your home.

📍 Serving Coeur d’Alene, Post Falls, Hayden, Rathdrum & surrounding North Idaho

Need a railing built? Give Mello Metalworks a call.

Mello Metalworks LLC
Custom Metal Fabrication • Railings • Welding • Installation

10/04/2026

We kicked off the week with two projects on Hayden Lake:

🔹 Phase 2 of a stair railing project — fixing and building onto an existing staircase railing that wasn’t up to code. It’s always rewarding to take an existing setup and make it safe, functional, and built right.

🔹 Met with a customer, finalized drawings, and ordered material for an upcoming black-on-black cable railing project. Can’t wait to see this one come together.

Next we installed a smaller railing project for a really great customer in Hayden.

Down at The Terraces in downtown Coeur d’Alene, we worked on repairing the condos’ floating dock — another unique project that keeps things interesting!

We wrapped up the week fabricating and test-fitting another smaller project in Hayden.

A huge THANK YOU to the local businesses that continue to play a big part in helping Mello Metalworks grow:

🛠️ TNL Multi-Services — Thank you for always doing an amazing job with the sandblasting and powder coating on our projects. We appreciate the quality work and the partnership!

🌊 Get Wet Diving Solutions — A big thank you for the continued work and opportunities you send our way. We’re grateful to get to work on some of the beautiful lakes we’re lucky enough to have right here in North Idaho!

And as always, thank you to our customers, contractors, and everyone who continues to recommend and support Mello Metalworks. A lot of our work comes from referrals, and we don’t take that for granted.

We’re staying busy and looking forward to what’s next!

Mello Metalworks LLC
Custom Railings • Fabrication • Welding • Installation

📍 Serving North Idaho & the surrounding area

09/25/2026

🔨 Another busy week at Mello Metalworks! 🔥

It’s been another productive week in the shop and out in the field. Here’s a look at a few of the projects we’ve been working on:

🛠️ Custom Powder Coat Rack – TNL Multi Services
Built a custom rack to help with their powder coating operation. Always enjoy working with the crew at TNL!

🏗️ Dock Fabrication – Terraces CDA
Fabrication work for a dock project in Coeur d’Alene. More details and photos coming as this one comes together!

💈 Custom Barber Chair Bracket – Logan at The Barbershop CDA
Fabricated a custom bracket modification for Logan’s barber chair, then had TNL Multi-Service put the finishing touch on it with a professional powder coat.

We’re grateful for the work and especially for the local businesses and customers who continue to trust Mello Metalworks with their projects. Every job is a little different, and that’s exactly how we like it!

Have a project that needs to be fabricated? Give us a call!
🔨 Custom Fabrication
⚙️ Welding & Repairs
🏗️ Commercial & Residential Metalwork
🛠️ Railings & Custom Projects

📍 Serving Coeur d’Alene, Post Falls, Hayden & surrounding areas

Mello Metalworks — If you can dream it, we can build it.

09/23/2026

Another beautiful day out here working on docks on coeur d Alene lake with GET WET diving and TNL Multi Services.